27" F70 Full Extension Soft-Close Undermount Drawer Slide Frameless Salice G7U6S686CXB

Zinc Undermount Drawer Slide For High-Capacity Frameless Cabinets

The Salice F70 27-inch soft-close undermount drawer slide is a full-extension, concealed runner built for frameless cabinets demanding both a clean look and a substantial load rating. Sold as a pair, it brings damped, silent closing to drawers up to 27 inches deep with a 170 lb weight capacity.

Key Features

• Full extension opens the entire drawer to the cabinet face, making every inch of the interior reachable.
• 170 lb weight capacity per pair handles heavily loaded kitchen, shop, and utility drawers with margin to spare.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently on every close.
• Frameless cabinet design mounts directly to the cabinet side panel without rear brackets or adapter hardware.
• Zinc steel construction delivers lasting durability through years of daily cycling in a functional, low-profile finish.
• Compatible with 1/2 to 5/8 inch drawer sides gives flexibility across different box-building conventions.

Where This Slide Fits the Work

A 27-inch run is on the longer end of standard kitchen drawer depth, which means the contents tend to be heavier: deep pots-and-pans drawers, loaded utensil banks, or shop drawers stocked with tools. At 170 lb per pair, this slide handles that category without compromise. The full-extension travel means a reach to the back of a 27-inch drawer does not require rummaging — the whole box clears the face and everything inside is visible. For cabinet shops running frameless boxes on a production schedule, the direct side-panel mount means no rear-bracket inventory to manage and no secondary hardware step at install.

The undermount position keeps the slide entirely hidden beneath the drawer box, so the interior walls stay clean and no hardware shows when the drawer is pulled open. That matters most in finished kitchen and furniture work where the inside of a drawer is as visible as the outside.

Construction and Finish

The F70 is built from steel with a zinc finish — a practical, corrosion-resistant surface suited to indoor cabinetry environments. Zinc plating is a functional choice on a slide that will spend its life inside a cabinet box: it protects the steel through years of cycles without adding visible bulk. The slide accommodates drawer sides between 1/2 inch and 5/8 inch thick, which covers both thinner European-style plywood boxes and the 5/8-inch stock common in domestic shop production. The drawer box must be built to the F70's published specification — including the correct box width, rear notch, and locking-device drilling — for the slide to seat and adjust correctly.

Who Reaches for This Length

Cabinet shops producing frameless kitchen and bath cabinetry will find the 27-inch length matches deep base cabinet runs and appliance-garage drawers that demand full access and a high load rating. Designers specifying hardware for a kitchen renovation with heavy pull-out storage benefit from the 170 lb ceiling and the clean undermount profile. Contractors and installers working frameless boxes appreciate the direct mount and the integrated soft-close, which eliminates a separate damper step. Homeowners replacing worn slides in an existing frameless cabinet can match this length when the drawer box is already built to a 27-inch nominal depth.

A Reliable Pair for the Drawers That Get Used Most

When the drawer is deep, the load is heavy, and the cabinet is frameless, the F70 27-inch soft-close pair delivers the extension, capacity, and clean close that keep that combination working well over time.