
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice F70 30 inch undermount drawer slides are full extension slides that support drawers built with 1/2 inch (12 mm) to 5/8 inch (16 mm) material, so they match common kitchen and shop drawer box construction. The Smove soft-close mechanism is fully integrated into the slide, which controls closing speed and protects the drawer from slamming under load. A 150 lbs dynamic and 170 lbs static load capacity lets the slide handle heavy drawers in service while also supporting higher static loads when the drawer is extended and stationary. The zinc finish on these slides provides a clean, uniform surface that suits concealed undermount applications. These slides are 100 percent made in Italy, tying performance directly to a consistent manufacturing source. The Salice America UBF70FLSC-30 part number identifies this 30 inch F70 undermount model for repeat jobs and service work.
These Salice F70 30 inch undermount slides work with 1/2 inch (12 mm) to 5/8 inch (16 mm) drawer thickness, so builders can set up box dimensions confidently within that material band. Integrated tool free height adjustment of plus 2.5 mm lets installers raise the drawer in small steps at the clip, which helps achieve consistent reveals under countertop lines or trim rails. Tool free depth adjustment of plus or minus 3 mm provides controlled front-to-back movement, which is useful when setting the drawer front flush with adjacent fronts after mounting. Tool free side adjustment of plus or minus 1.5 mm shifts the drawer laterally, which makes it practical to correct small case or box tolerances. This F70 slide can also be used in face frame applications with a block out, tying the undermount performance to both frameless and face frame cabinet layouts.
This F70 undermount drawer slide from Salice America is designed as a full extension solution for drawers built from 1/2 inch (12 mm) to 5/8 inch (16 mm) material, so it fits common side thicknesses used in kitchen, bath, and shop cabinetry. The 30 inch length suits deeper base and tall cabinet drawers, allowing full travel in longer boxes where access to the back is critical. A 150 lbs dynamic load capacity means the slide is intended for drawers that move under significant weight, such as pots, tools, or hardware bins. The 170 lbs static load capacity supports those loaded drawers when they are fully extended, so they remain supported during access. The soft-close Smove mechanism integrated into the slide supports quieter operation in living spaces, while protecting drawer joints from high closing forces during regular use. Because this model can be used for face frame application with a block out, it supports projects where both construction styles appear in the same job.
Elongated holes for depth and height adjustment on the slide allow installers to shift the hardware slightly before final tightening, which helps align multiple drawers in a stack without recutting cabinet parts. The adjustable clips allow easy drawer insertion and removal, which simplifies fitting in the shop and later service access on site. A special clip for narrow drawers is available, giving a dedicated interface for slimmer drawer widths built within the supported thickness range. Integrated tool free height adjustment of plus 2.5 mm at the front makes step-by-step vertical tuning simple, supporting tight, even reveals. Tool free depth adjustment of plus or minus 3 mm lets installers bring the drawer front forward or backward so it lines up with doors or adjacent drawers. Tool free side adjustment of plus or minus 1.5 mm offers small lateral shifts, which is useful when cases vary slightly in width or are out of square. An optional tool free tilt adjustment of plus 3 mm adds controlled front tilt, helping align taller drawer fronts across multiple openings with less rework.
The Salice F70 undermount slide supports drawer thickness from 1/2 inch (12 mm) to 5/8 inch (16 mm), so it fits typical solid wood or panel drawer sides within that range.
The UBF70FLSC-30 slide carries 150 lbs dynamic load and 170 lbs static load, supporting heavy drawers during movement and while fully extended under everyday use.
The Salice F70 slide uses the Smove soft-close mechanism fully integrated into the slide, which slows the final travel and helps prevent slamming during normal operation.
The F70 slide can be used for face frame applications with a block out, allowing the same undermount hardware across frameless and face frame cabinet runs.
The F70 slide provides integrated tool free height adjustment plus 2.5 mm, depth adjustment plus or minus 3 mm, side adjustment plus or minus 1.5 mm, and optional tool free tilt adjustment plus 3 mm.
The Salice F70 undermount drawer slides are 100 percent made in Italy, tying their performance to a consistent, defined manufacturing source.
The Salice F70 30 inch soft-close full extension undermount drawer slides combine 150 lbs dynamic and 170 lbs static load ratings with Smove soft-close to support heavier drawers in everyday use. Tool free height, depth, side, and optional tilt adjustments help align drawer fronts cleanly across frameless and face frame installations. With support for 1/2 inch (12 mm) to 5/8 inch (16 mm) drawer thickness, these slides fit common drawer box builds. For projects requiring consistent, adjustable undermount performance, this UBF70FLSC-30 model from Salice America offers a defined specification to work from.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | UBF70TILT-LR Mfr# AGLRXX3F | F70 Tilt Adjustment Levers Set - 3mm Tilt |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBF70-TEMPLATE Mfr# ASGD704U3XA | F70 Drilling Template For F70 Undermount Drawer Slides |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | UBF70CLIP-SLR Mfr# UBF70CLIP-SLR | F70 Adjustable Front Locking Devices Standard Mount, Left Right Front Locking Device | ||||
Sold in: 1 Set | UBF70CLIP-VLR Mfr# UBF70CLIP-VLR | F70 Adjustable Front Locking Devices Vertical Mount, Left Right Front Locking Device | ||||
Sold in: 1 Set | UBF70CLIP-NLR Mfr# UBF70CLIP-NLR | F70 Adjustable Front Locking Devices Narrow Mount, Left Right Front Locking Device |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBF70-SRB Mfr# AGSK7C5B | F70 Standard Rear Mounting Bracket, Steel | ||||
Sold in: 1 Each | UBF70-NRB Mfr# AGSK7R5B | F70 Narrow Rear Mounting Bracket, Steel |