Salice F70 18" Push-to-Open Full Extension Undermount Drawer Slides, Zinc - UBF70FFPO-18

Salice F70 18 Push To Open Undermount Slides

Salice F70 18 push to open undermount slides are full extension undermount drawer slides designed for handle-less drawers, so you get clean fronts with responsive opening. The slides work with drawer sides from 1/2 inch (12 mm) to 5/8 inch (16 mm) thickness, which covers common construction for many cabinet shops. The push opening system is fully integrated into the slide, so there is no separate mechanism to plan around when laying out the drawer box. A slight pressure on the drawer front is enough for the drawer to open, which keeps operation simple on site or in the shop. The slides are rated at 150 lbs dynamic and 170 lbs static load capacity, giving support for heavier drawers within that range. This model is an undermount drawer slide for face frame applications, so it fits projects built around face frame cabinet construction.

Key Salice F70 Features That Help On The Job

• The full extension slide design lets the drawer travel its full length, so contents remain accessible from front to back during everyday use and installation checks.
• The integrated Push opening system eliminates separate push hardware, reducing layout complexity around the runner when planning handle-less drawer fronts.
• Support for 1/2 inch (12 mm) to 5/8 inch (16 mm) drawer thickness allows the same slide to work across typical side material choices in many cabinet builds.
• Elongated holes for depth and height adjustment give extra play during mounting, which helps fine tune drawer alignment inside a face frame opening.
• Adjustable clips allow easy drawer insertion and removal, so drawers can be taken off the slides quickly during finishing or site work and reinstalled without tools.
• The drawer is latched when closed, which keeps the drawer front seated against the cabinet until the Push opening is activated.

Installation And Adjustment For Accurate Drawer Fit

These Salice F70 undermount slides provide tool free height adjustments of plus 2.5 mm, so installers can set vertical gaps between fronts without extra hardware. Tool free depth adjustments of plus or minus 3 mm help bring fronts flush to the cabinet face plane. Tool free side adjustments of plus or minus 1.5 mm let you center the drawer within the opening for even reveals. Elongated mounting holes support these adjustments by allowing the runner position to shift slightly as needed. Adj. clips support narrow drawers with a special clip, which helps keep smaller drawer boxes properly supported on the undermount slide. An optional tool free tilt adjustment of plus 3 mm and an optional F70 Push Synchronizer are available, giving additional control over how the drawer front sits and opens along its travel.

Using Salice F70 Slides In Face Frame Projects

Where This Salice F70 Slide Performs Best

This F70 face frame push open slide is built for handle-less drawers in face frame cabinets, so it suits modern designs that still use traditional cabinet construction. The full extension undermount design supports storage drawers that must open fully under a countertop or within a furniture piece. The integrated Push opening system supports situations where pulls are not desired, as the drawer responds to a light press on the front. Support for drawer side thickness from 1/2 inch (12 mm) to 5/8 inch (16 mm) means many standard shop drawer constructions will fit directly on this runner. With dynamic load capacity of 150 lbs and static capacity of 170 lbs, the slide can carry substantial weight within that range in kitchen, bath, or office cabinetry built on face frames.

Details That Support Repeatable Drawer Results

The integrated tool free height, depth, and side adjustments turn the slide into a fine-tuning system for reveals, because each axis can be dialed in without separate tools. Height adjustment of plus 2.5 mm helps align horizontal lines of multiple drawer fronts across a cabinet bank. Depth adjustment of plus or minus 3 mm lets the front sit exactly where the design requires relative to the face frame edge. Side adjustment of plus or minus 1.5 mm helps keep margins even from stile to stile. The elongated holes give mounting flexibility so brackets and screws can be set, then the slide nudged into final position before tightening. Adj. clips that support easy drawer insertion and removal help during finishing stages, since boxes can be lifted off and returned without disturbing adjustments. Optional tool free tilt adjustment of plus 3 mm and the optional F70 Push Synchronizer provide further control over front angle and coordinated opening for consistent operation on wider drawers.

Common Questions About UBF70FFPO-18 Use

Selecting Salice F70 Slides For Your Next Build

The Salice F70 18 inch push-to-open full extension undermount drawer slides combine integrated Push opening, high load ratings, and multi-axis tool free adjustment, which supports clean, handle-less drawer layouts in face frame cabinets. The ability to work with 1/2 inch (12 mm) to 5/8 inch (16 mm) drawer sides keeps these slides practical across many shop standards. Elongated holes and adj. clips help streamline alignment, service, and drawer removal around finishing work. For handle-less, face frame cabinetry where precise reveals and smooth opening are priorities, UBF70FFPO-18 from Salice America provides a focused undermount slide solution.