Salice F70 24" Push-to-Open Full Extension 170 lb Undermount Drawer Slide, Zinc, UBF70FLPO-24

Push-to-Open Undermount Slide For Handle-Less Frameless Cabinets

The Salice F70 is a 24 inch full-extension push-to-open undermount drawer slide built for frameless cabinets with handle-less fronts. A light press on the front ejects the drawer cleanly, and the slide disappears beneath the box so nothing interrupts the cabinet's face. At 170 lb per pair, it handles loads that standard undermounts cannot.

Key Features

• Mechanical push-to-open ejects the drawer with a light press on the handle-less front, no pulls or knobs required.
• Full extension brings the entire 24 inch drawer out to the cabinet face, giving complete access to the back of the box.
• 170 lb capacity per pair puts this slide in heavy-duty territory for an undermount, well above the standard 90 to 100 lb class.
• Frameless cabinet design mounts directly to the cabinet side panel for a clean, straightforward installation.
• Fully concealed beneath the drawer box so no hardware is visible when the drawer is open.
• Steel construction with zinc finish for reliable indoor service over years of daily use.

Where This Slide Belongs

The 24 inch length suits deeper base cabinet drawers — pots-and-pans pulls, full-depth utility drawers, and large pantry storage boxes where a 24 inch drawer box is the right fit. The push-to-open mechanism makes it the natural choice wherever hardware-free fronts are part of the design: modern flat-front kitchens, minimalist bath cabinetry, and built-ins where pulls would break the visual line. Because the capacity sits at 170 lb per pair, this slide also covers applications that heavier contents demand — loaded tool storage, bin pull-outs, and deep drawers stacked with cookware — where a standard undermount would be undersized.

This is the mechanical push-to-open version of the F70: the drawer opens on a press and closes without a damper. If a silent, controlled close matters more than handle-less operation, choose the soft-close model in this length instead. The two functions are separate models in the F70 line.

Construction and Finish

The F70 slide is built from steel with a zinc finish — a functional, corrosion-resistant coating suited to indoor cabinetry. The slide mounts beneath the drawer box on both sides, fully concealed in use, so the finish is there to protect the mechanism rather than contribute to the look of the cabinet. Fixing clips are Salice F70-specific; they are not interchangeable with other undermount brands or series. The drawer box must be built to Salice's published specification for the F70: 1/2 to 5/8 inch drawer sides, correct box width, bottom recess, rear notch, and the drilling for the series' fixing clips. An off-spec box will not seat correctly.

Who Orders This Slide

Cabinet shops running handle-less modern kitchens reach for the F70 push-to-open when the design calls for clean faces and the drawer is large or heavily loaded. Residential designers specifying European-style frameless casework use it where 24 inch depth is standard and pulls are not in the plan. Contractors finishing out utility rooms, butler's pantries, and home offices with frameless boxes benefit from the 170 lb rating when the drawer contents are dense. This slide is for frameless construction only — face-frame cabinets require the face-frame version of the F70.

Common Questions

The Right Slide for a Handle-Less Build

When the design calls for clean faces, deep drawers, and the load capacity to back them up, the Salice F70 24 inch push-to-open undermount delivers all three in a concealed frameless package.