Series E12 Polyester Booth Filters - Air Flow Technology 02E12202040

E12 Poly Overspray Pad 20x20x2 For Booths

E12 poly overspray pad 20x20x2 describes a polyester booth filter sized 20 by 20 inches and 2 inches thick, so installers can match it directly to exhaust grid openings and frame depth in spray equipment. Series E12 polyester booth filters from Air Flow Technology serve as overspray collectors, so airborne paint and stain particles are captured before reaching the exhaust stack. A highest particle removal efficiency of 99.9% in a single stage overspray collector means the media captures nearly all overspray in one pass, reducing buildup on downstream ducting. Excellent holding capacity of 1.3 lbs per square foot lets each pad load significant overspray, so change-out intervals can be spaced according to shop usage. Low initial static pressure of 0.12 w.c. supports airflow through the booth, which helps keep spray patterns consistent.

Key Filter Details That Support Shop Work

• Highest particle removal efficiency of 99.9% in a single stage overspray collector captures fine and heavy paint particles, so exhaust air leaves less residue on fans and stacks.
• Excellent holding capacity and longevity rated at 1.3 lbs per square foot lets each pad store substantial overspray, so booths can run longer between filter changes under typical workloads.
• Low initial static pressure of 0.12 w.c. allows exhaust fans to pull air through the filter with less resistance, supporting stable booth airflow and consistent finish quality.
• Excellent first stage filtration for multi-stage exhaust systems positions this media at the intake to protect second and third stage filters, helping maintain predictable system performance.
• Construction from polyester material made in the U.S.A. from recycled materials gives shops a synthetic media option that also supports recycled content requirements on some projects.
• Classification under paint and stain supplies for spray booths and filters groups this pad with spray equipment components, helping buyers standardize media across finishing areas.

Spray Booth Filter Fit And Airflow Behavior

Series E12 polyester booth filters are described as excellent first stage filtration for multi-stage exhaust systems, so they are intended to sit where booth air first enters the exhaust stack. Low initial static pressure of 0.12 w.c. indicates the media resists airflow minimally when clean, so existing fan setups can maintain designed capture velocity at spray positions. The E12 poly overspray pad 20x20x2 format places the polyester media in a 2 inch thickness, giving the pad depth to load overspray while still fitting shallow filter racks that accept 20 by 20 inch panels. As the pad reaches its excellent holding capacity of 1.3 lbs per square foot, loading happens within the depth of the polyester, helping airflow taper predictably rather than blocking instantly.

Using These E12 Filters In Spray Exhaust

Where Series E12 Polyester Booth Filters Are Applied

Series E12 polyester booth filters from Air Flow Technology are positioned as spray booth filters in the paint and stain supplies category, so they are designed for finishing environments that exhaust overspray. Description as excellent first stage filtration for multi-stage exhaust systems identifies their role at the front of a filter train, where booth air first passes through media before moving to any downstream stages. Highest particle removal efficiency of 99.9% in a single stage overspray collector shows that even when used alone as a single stage, these filters still capture the majority of overspray, supporting cleaner discharge air from spray equipment. The E12 poly overspray pad 20x20x2 sizing supports installations in booth doors, plenums, or exhaust walls that accept 20 inch by 20 inch pads, giving finishing rooms a defined media dimension to standardize across multiple stations.

Why These Spray Booth Specs Matter In Use

Excellent holding capacity and longevity of 1.3 lbs per square foot means the polyester media can accept substantial overspray loading before reaching its limit, so maintenance teams can plan filter rotations around predictable performance rather than sudden airflow loss. Low initial static pressure of 0.12 w.c. helps keep fan loads modest when filters are new, which supports stable airflow and even draw across the booth face, aiding consistent coating laydown. When used as excellent first stage filtration in a multi-stage exhaust system, these E12 filters intercept much of the overspray before it reaches finer downstream media, which helps preserve the function of later stages. Construction from recycled materials in the U.S.A. adds a documented recycled content profile, which can align with shop sustainability goals while still using a synthetic overspray collector.

Common Questions About This Spray Booth Filter

Select E12 Filters For Consistent Spray Exhaust Control

The E12 poly overspray pad 20x20x2 format gives finishing shops a clearly defined polyester booth filter that aligns with 20 by 20 inch, 2 inch deep frames in spray equipment. Highest particle removal efficiency of 99.9% in a single stage overspray collector, combined with excellent holding capacity of 1.3 lbs per square foot and low initial static pressure of 0.12 w.c., supports predictable exhaust performance. For operations standardizing booth media, using Series E12 polyester booth filters from Air Flow Technology through Wurth Baer Supply aligns overspray capture, airflow, and maintenance planning around one consistent filter specification.