Series E12 Polyester Booth Filters - Air Flow Technology 03E127260
Description
E12 Polyester Booth Filters For Overspray Control
E12 polyester booth filters from Air Flow Technology are engineered as high-performance overspray collectors that support clean spray operations in paint and stain environments. The polyester media delivers highest particle removal efficiency at 99.9%, capturing overspray before it can load downstream components. This performance helps maintain consistent airflow conditions in spray booths during production. The E12 poly overspray roll is specified at 60x72x2, so each filter is sized for use where that panel dimension and thickness are required. As part of the E12 series, these filters function within spray equipment and spray booth exhaust systems to handle overspray from coatings. The construction from polyester material is designed for booth filtration applications where particle capture and airflow stability matter on every job.
Key Filtration Details That Support Booth Performance
- The E12 polyester media delivers 99.9% particle removal efficiency, which captures overspray effectively so booth exhaust and surrounding work areas stay cleaner during spraying.
- The overspray collector is rated with holding capacity and longevity of 1.3 lbs per sq ft, allowing the filter to retain more collected material so changeout frequency can align with heavier spray use.
- The filter operates with low initial static pressure of 0.12" w.c., supporting airflow through the booth so exhaust performance remains closer to design conditions when the media is new.
- The product serves as excellent first stage filtration for multi-stage exhaust systems, intercepting most overspray at the front end so subsequent stages see cleaner air and lighter loading.
- The filters are made in the U.S.A. from recycled materials, which gives shops a booth filtration choice that uses recycled content while meeting stated filtration performance.
Installation Role In Single And Multi-Stage Booths
The E12 polyester booth filters are designed as a single stage overspray collector, so they function as the primary capture layer where a booth relies on one filtration stage. In multi-stage exhaust systems, these filters act as excellent first stage filtration, taking the heaviest overspray load before air reaches downstream stages. The specified 60x72x2 size defines how each filter panel fits into spray booth filter frames that accept that dimension, guiding layout and replacement planning. With low initial static pressure of 0.12" w.c., the media allows booth fans to pull air through with less resistance at startup, supporting stable airflow patterns as spraying begins.
How These E12 Filters Work In Spray Operations
Where E12 Polyester Booth Filters Are Used
Series E12 polyester booth filters are applied in spray equipment and spray booths handling paint and stain work, where overspray capture is required in the exhaust path. Their role as a single stage overspray collector positions them directly in the airstream to remove particles as coatings are applied. In multi-stage exhaust systems, the E12 filters serve as the first stage, so they sit ahead of finer stages and remove the bulk of paint and stain overspray. The 60x72x2 format defines each filter panel or cut section, aligning use to booths or filter racks set up for that size. This combination of defined dimensions and stated filtration role supports consistent placement in spray booth layouts.
Why E12 Performance Supports Consistent Results
The E12 polyester media provides 99.9% particle removal efficiency, so overspray is captured at a high rate and less coating material re-enters the booth environment, aiding finish consistency around sprayed parts. With holding capacity and longevity of 1.3 lbs per sq ft, each filter can retain a significant amount of collected overspray, supporting longer service intervals in busy booths before airflow begins to change appreciably. The low initial static pressure of 0.12" w.c. helps booth exhaust systems start with lower resistance across the filter bank, which supports target airflow levels when filters are fresh. Acting as excellent first stage filtration in multi-stage exhaust systems, these filters reduce the load on downstream media so later stages focus on finer particles. Being made in the U.S.A. from recycled materials, the filters provide this filtration performance while incorporating recycled content, which matters to operations selecting supplies that reflect that material choice.
Common Questions About E12 Polyester Booth Filters
What type of filtration do E12 polyester booth filters provide?
Series E12 polyester booth filters provide highest particle removal efficiency at 99.9%, so they capture overspray in spray booth exhaust streams and support cleaner air leaving the booth.
How are these filters used in spray booth exhaust systems?
The E12 polyester booth filters function as a single stage overspray collector or as excellent first stage filtration in multi-stage exhaust systems, positioning them at the leading stage of overspray capture.
What does the 60x72x2 size mean for fit?
The 60x72x2 specification defines the length, width, and thickness of the E12 poly overspray roll, guiding use in spray booth filter frames or racks that accept that panel size.
How does low initial static pressure benefit booth airflow?
The E12 filter's low initial static pressure of 0.12" w.c. means exhaust air encounters less resistance when filters are new, supporting more consistent airflow through the booth.
What does the 1.3 lbs per sq ft holding capacity indicate?
The 1.3 lbs per sq ft holding capacity indicates how much overspray the polyester media can retain, supporting longer use between filter changes in spray operations.
Where are these E12 polyester filters manufactured?
The E12 polyester booth filters are made in the U.S.A. from recycled materials, so their construction uses recycled content while meeting the stated filtration characteristics.
Select E12 Polyester Booth Filters For Spray Booths
The Series E12 polyester booth filters from Air Flow Technology pair 99.9% particle removal efficiency with 1.3 lbs per sq ft holding capacity to support overspray control in spray booths. The 60x72x2 roll format and low initial static pressure of 0.12" w.c. connect filtration performance to predictable airflow and defined sizing. For spray equipment and spray booth setups that need a single stage overspray collector or a first stage in multi-stage systems, this E12 polyester solution provides clearly stated operating characteristics for booth filtration planning.