Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
E75/N-Poly polyester booth filter gives a spray booth a dedicated media for capturing paint overspray, so the work area stays cleaner and exhaust air handling is more controlled during finishing jobs. High particle removal efficiency rated at 99 percent plus means the pad traps a very high percentage of overspray particles as air passes through, which supports more consistent finish quality in repeated spray cycles. Excellent holding capacity and longevity let the filter load with overspray over time while still performing, so change-out intervals can be spaced to match shop workflow instead of frequent stoppages. Low initial static pressure of 0.06 w.c. keeps air resistance low at the start of service, so fans see less restriction and booth air flow starts out closer to design performance. Construction from polyester material provides a stable filter structure in normal spray booth environments.
The E75 POLY overspray pad specified at 20x25x1 defines the nominal width, height, and thickness of each filter, so the pad seats into a spray booth filter rack or holding frame built around that size. This dimensional match helps the filter face cover the intended opening, which reduces bypass gaps around the edges that could allow overspray to escape capture. Low initial static pressure of 0.06 w.c. describes resistance when the pad is new, so the fan and duct system see a known starting load as air is pulled through. That predictable resistance, combined with media that improves spray booth air flow, helps maintain a consistent draw pattern across the booth face during early filter life, supporting even capture of paint particles.
The E75/N-Poly polyester booth filter is listed under spray equipment and spray booths, filters, so it is positioned for use in spray booth exhaust or intake locations where overspray or airborne particles need to be captured. Classification as a paint and stain supplies product aligns the filter with finishing operations that handle finishing materials, so it fits into the workflow around spraying coatings on workpieces. High particle removal efficiency at 99 percent plus means in these spray environments the media captures a large share of airborne overspray, which supports clearer sightlines in the booth and helps keep downstream exhaust paths cleaner. An E75 POLY overspray pad sized 20x25x1 presents a defined filter area to the airstream, so when placed in matching racks the booth draws air evenly across that face instead of pulling predominantly through small segments.
Excellent holding capacity and longevity give the E75/N-Poly polyester booth filter the ability to retain overspray while continuing to function, which supports more stable airflow over multiple spray sessions before a media change. As the pad loads, its efficient capture still keeps particles within the polyester structure, so less material deposits on ductwork or fans, which can help keep mechanical components operating closer to intended performance. Low initial static pressure of 0.06 w.c. means the booth begins service with relatively low resistance through the filter bank, so balance readings and airflow patterns assessed at start-up remain closer to what operators experience in use. Construction from recycled materials ties into facilities that track material inputs, while production in the U.S.A. supports users who value domestic manufacturing when selecting spray booth filtration components.
The E75/N-Poly polyester booth filter is a polyester overspray pad for spray booths, so it serves as a filtration layer to capture paint overspray in finishing operations.
The E75/N-Poly polyester booth filter uses 99 percent plus particle removal efficiency to trap most overspray, which supports cleaner booth air and more consistent coating appearance on workpieces.
The E75/N-Poly polyester booth filter presents only 0.06 w.c. initial static pressure, so airflow starts with relatively low resistance and helps the booth operate close to its design air volume.
The E75/N-Poly polyester booth filter offers excellent holding capacity and longevity, so it retains significant overspray while continuing to function, supporting longer intervals between media changes.
The E75 POLY overspray pad 20x25x1 defines the filter width, height, and thickness, so it fits spray booth racks designed around that nominal opening size for proper coverage.
The E75/N-Poly polyester booth filter is described as improving spray booth air flow, so it helps air move more uniformly through the booth, supporting overspray capture and operator comfort.
The E75/N-Poly polyester booth filter brings a combination of 99 percent plus particle removal efficiency, excellent holding capacity, and low initial static pressure, so it aligns with spray operations that value consistent airflow and strong overspray capture. An E75 POLY overspray pad in the 20x25x1 size fits spray booth racks built for that nominal opening, which supports edge-to-edge coverage of the airstream. Construction in the U.S.A. from recycled materials ties this filtration choice to domestic production and reclaimed input material. For shops focused on steady booth performance across regular finishing shifts, this Air Flow Technology booth filter offers a defined set of airflow and capture characteristics to match against spray booth filtration needs.
Sold In: 1 Case
