Olympus Disc Tumbler Cam Lock For Cabinets

Olympus disc tumbler cam lock is a cam lock from Olympus Lock, Inc. in bright nickel that secures drawers and right-hand or left-hand doors, so one part number can be used across typical cabinet layouts with a consistent look. The lock is keyed alike 390, which keeps every matching lock on the job operating from the same key pattern, streamlining access control where multiple users work the same casework. The product passed the ANSI/BHMA Grade 2 cycle test for 20,000 cycles, showing it is built to handle repeated key insertion, removal, and operation in everyday commercial or shop environments. The SAP description notes a 1-7/16 max reference, tying the lock body to overlay applications where front and frame thickness must stay within the listed cylinder length. A 1-3/4 inch cylinder designation supports use in deeper fronts where a longer cylinder is needed for proper engagement.

Key Olympus Cam Lock Details That Help On Site

• The lock comes assembled with the cylinder and body connected via a patented retainer staple, so field time is spent mounting and aligning rather than building up the lock from loose components during cabinet installation.
• A spur washer with eyelet is part of the design and, when screwed into place, it prevents lock rotation and keeps the fixing nut from loosening, which stabilizes the lock in wood or sheet material over long-term use.
• The product offers a 90 degree cam turn, giving a simple quarter-turn motion that is easy to operate and predictable when laying out cam strike positions on drawers and doors.
• The cam options support lipped or overlay construction with a 1-1/2 inch straight cam and flush construction with a 1-1/8 inch extension, 11/32 inch offset cam, so the same core hardware addresses different cabinet build styles.
• The design uses a revolutionary cylinder plus cylinder extender, allowing cylinders to be swapped between different size cam lock bodies, which simplifies inventory and gives flexibility when keying groups of cabinets.

Cam Lock Fit, Construction Styles, And Cylinder Length

The cam lock is intended for drawers and for right-hand or left-hand doors, which lets installers standardize on this Olympus cam lock across a project without tracking separate SKUs for swing direction. For overlay construction, the combined thickness of the front and frame cannot exceed the cylinder length listed, so the 1-7/16 max reference and 1-3/4 inch cylinder sizing guide where this lock will seat correctly through the material. Lipped or overlay cabinets use the 1-1/2 inch straight cam, while flush construction uses the 1-1/8 inch extension cam with 11/32 inch offset, tying the cam style directly to face condition so engagement with the strike line remains consistent. Key removal in both locked and unlocked positions lets users remove the key after cycling the lock either way, which is useful where frequent access is needed without leaving keys hanging from fronts.

Using This Olympus Cam Lock In Real Projects

Where This Disc Tumbler Cam Lock Works Best

This cam lock sits in the Locks and Latches, Cam Locks product class, putting it directly in the cabinet and casework hardware mix for woodworking projects. Its design for drawers and for right-hand or left-hand doors fits common storage cabinets, shop fixtures, and similar enclosures that rely on cam action rather than latch bolts. The bright nickel finish provides a clean, neutral appearance that coordinates with typical decorative hardware finishes on cabinet fronts. Because the product is keyed alike 390, a run of cabinets can be planned so that a single key pattern services multiple locks, which is practical in commercial, institutional, or workshop settings where controlled but shared access is needed.

Why These Cam Lock Details Support Consistent Results

The 90 degree cam turn defines a short, repeatable motion, which helps during layout because the cam travel from open to closed is known when positioning strikes or receiving hardware. The use of a spur washer with eyelet that, when screwed into place, prevents lock rotation and holds the fixing nut from loosening means the barrel stays aligned over time, reducing call-backs for locks spinning in their holes. The revolutionary cylinder plus cylinder extender feature allows one key system to be carried across different cam lock body lengths, supporting inventory efficiency when cabinets vary in material thickness. The ability to remove the key in both locked and unlocked positions speeds up workflow in environments where staff move quickly between cabinets but still need a positive lock position. Custom keying typically ships direct from the manufacturer in 48-72 hours, giving project planners a predictable window to integrate specific keying patterns into broader access plans without extended delays.

Common Questions About Olympus Disc Tumbler Cam Lock

Select This Cam Lock For Disc Tumbler Security

The Olympus disc tumbler cam lock 960-14A-C390A from Wurth Baer Supply offers a bright nickel finish, keyed alike 390 operation, and a 90 degree cam turn for drawers and cabinet doors. Its cam options support both lipped or overlay construction and flush construction, so one solution can serve varied cabinet build styles. With the ANSI/BHMA Grade 2 cycle test rating and a cylinder plus cylinder extender that streamlines keying across body sizes, this cam lock fits projects that balance reliable function with straightforward field installation. Use this part when a disc tumbler cam lock with predictable operation and keyed alike flexibility is required for cabinets or enclosures.