Olympus Disc Tumbler Cam Lock For Drawers And Doors

Olympus disc tumbler cam lock gives drawers and cabinet doors a keyed lock point using a 1-3/4 inch cylinder keyed alike to the 420 key number. This keyed alike setup keeps multiple lock locations on the same key, which simplifies key control on jobs with several access points. The lock body arrives assembled with the cylinder using a patented retainer staple, so the main lock components are already mated for installation and there is no separate body-to-cylinder build step on site. The lock is designed for drawers and both right-hand and left-hand doors, so one part number can be used across common cabinet orientations on a project. A 90 degree cam turn operates the locking action, giving a short, predictable handle or key rotation that suits tight cabinet layouts.

Cam Lock Details That Support Cabinet Workflows

• The lock passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, so the cylinder and cam mechanism are rated for repeated daily operation in typical cabinet use without changing part numbers.
• A bright nickel finish is used on the lock, giving a neutral metallic appearance that ties in with common cabinet and fixture hardware while providing a uniform look across multiple lock points.
• The design uses a revolutionary cylinder and cylinder extender, which lets cylinders be swapped between different size cam lock bodies so shops can adjust body length and keying setups without carrying a separate keyed system for each length.
• Key removal in both locked and unlocked positions allows the key to be withdrawn either way, which helps when users need temporary unlocked access without leaving a key hanging from the lock face.
• A spur washer with an eyelet is part of the lock design; when it is screwed into place it prevents the lock body from rotating and keeps the fixing nut from loosening, which helps the lock stay aligned in the panel over time.

Cam Lock Mounting And Construction Options

The Olympus disc tumbler cam lock works with lipped or overlay construction using a 1-1/2 inch straight cam, so it can secure doors that overlap a face frame while maintaining predictable cam reach. For flush construction, the lock is used with a 1-1/8 inch extension cam that has an 11/32 inch offset, which lets the cam reach back to the strike point on inset doors or drawer fronts without changing the basic lock cylinder. For overlay applications, the combined thickness of the front and frame cannot exceed the cylinder length listed, so cabinet fronts and frames are chosen to match the cylinder reach and allow full cam engagement through the mounting hole.

Where This Olympus Cam Lock Fits Best In Builds

Using The Cam Lock On Drawers And Cabinet Doors

This Olympus cam lock is specified for drawers and for right-hand or left-hand doors, so it can be applied across standard cabinet layouts without changing the lock family as the swing direction changes. The 90 degree cam turn means the key only rotates a quarter turn between locked and unlocked positions, which helps in confined spaces inside casework where handles or knobs might sit close to the lock. Lipped and overlay construction is supported using the 1-1/2 inch straight cam, allowing the cam to bridge the face frame overlap and catch the strike surface on the case. For flush construction, the 1-1/8 inch extension cam with 11/32 inch offset shifts the cam throw inward, which helps the locking arm meet the mating surface on inset doors or drawer fronts while using the same lock core.

Details That Help With Repeatable Lock Installations

The lock ships with the cylinder and body assembled via the patented retainer staple, so each unit arrives with the core already retained in the housing and ready for the panel cutout, reducing assembly variation between units. The spur washer with eyelet is designed to be screwed against the rear face of the panel; its spurs bite into the material to resist rotation and its design helps keep the fixing nut from loosening, which maintains key plug alignment relative to the front surface. Key removability in both locked and unlocked positions means users can remove the key after locking or leave the lock unlocked without a key hanging, which can streamline traffic flow on frequently accessed cabinets. The revolutionary cylinder and cylinder extender system lets a shop move a keyed cylinder between different body lengths, so changing cabinet thickness or construction style can be handled by selecting the appropriate body while keeping the same keying plan. Custom keying is offered and typically ships direct from the manufacturer in 48 to 72 hours, which supports jobs that require specific keying patterns or organized key control without long lead times.

Common Olympus Disc Tumbler Cam Lock Questions

Selecting This Cam Lock For Cabinet Projects

The Olympus disc tumbler cam lock with bright nickel finish, keyed alike 420 cylinder, and ANSI/BHMA Grade 2 cycle test performance is built to handle drawers and cabinet doors in lipped, overlay, or flush construction. The 90 degree cam turn, key removal in both positions, and assembled cylinder-and-body design all support efficient field work. The cylinder and extender system plus available custom keying in 48 to 72 hours help align lock selection with project-specific key plans and cabinet build details.