Sliding Door Track Assembly No. 10, 3' Length Mill Aluminum

Sliding Door Track Assembly No. 10 For Precise Runs

Sliding Door Track Assembly No. 10 is a mill aluminum sliding door hardware assembly designed for 3 ft openings, so it suits projects where a defined track length speeds layout and repeat work. The assembly is made for 1/2 in thick wood or glass doors, which lets you use the same solution across cabinet, closet, or panel applications built around that material thickness. The track is aluminum, giving you a rigid guide that stays straight over the full 3 ft run. A serrated face creates an attractive finished fascia, so the visible edge reads as a clean, intentional detail once the track is installed. Four #33 button glides provide smooth sliding action along the track, which reduces drag on the 1/2 in doors and helps them move consistently under normal use.

Key Sliding Track Details That Support Your Build

• This EPCO sliding door track assembly is built in a 3 ft length, which matches common cabinet and casework spans and keeps cutting and layout straightforward for repeat installations.
• The track is made from aluminum, providing a straight, stable guide surface over the full run, which supports smooth door travel on the #33 button glides in day-to-day use.
• The design is intended for 1/2 in thick wood doors, aligning with standard panel construction and letting you plan stiles and rails around a consistent door thickness.
• The same assembly works with 1/2 in thick glass doors, so one track style can serve both wood and glass builds that share this thickness requirement in a project.
• The serrated face of the track forms an attractive finished fascia, so the exposed front edge functions as a visual trim detail without additional facing pieces.
• Four #33 button glides operate in the aluminum track, giving each supported door a controlled sliding path that helps limit binding when the opening is used repeatedly.

Sliding Door Track Assembly No. 10 Fit And Setup

This EPCO sliding door track assembly centers on the 3 ft aluminum profile and the matched #33 button glides, so door travel is controlled by the geometry of the track rather than by improvised guides. The 1/2 in door thickness specification defines how the doors relate to the track, which simplifies sizing when you are working with standard 1/2 in wood or glass. The serrated face along the front of the aluminum profile becomes the visible fascia once mounted, so you can align the track so that this face reads straight and parallel to adjacent edges. Using the 10-A-3 assembly part number ties the field installation directly to this configuration, which helps match replacement or additional openings to the same sliding action.

Using This EPCO Track Assembly In Real Projects

Where Sliding Door Track Assembly No. 10 Works Best

This EPCO sliding door track assembly No. 10 is suited to sliding door hardware layouts that rely on a defined 3 ft span. In cabinet, closet, or built-in runs framed around 1/2 in thick wood doors, the track and #33 button glides give each panel a dedicated path along the aluminum guide. When the same opening is designed for 1/2 in thick glass doors, the assembly supports that thickness specification as well, so wood and glass options can be planned around the same hardware layout. The serrated face of the mill aluminum track presents as a finished fascia at the front edge, so the visible component ties in with surrounding casework lines instead of reading as unfinished hardware.

Why These Track Details Support Consistent Sliding

The 3 ft aluminum track length sets a fixed travel distance, which helps each 1/2 in thick door move predictably between closed and open positions along a straight, rigid guide. Four #33 button glides interact with the track surface to create smooth sliding action, so the door load is carried on defined contact points instead of dragging directly across a surface. The mill aluminum construction keeps the guide profile stable over time, which supports repeated cycles without the track shape changing in normal woodworking environments. The serrated face detail provides both grip for handling during installation and a finished fascia once the track is in place, so alignment work translates directly into a clean front appearance on the completed sliding opening.

Common Questions About EPCO Sliding Track Assembly 10-A-3

Select Sliding Door Track Assembly No. 10 For 1/2 In Doors

The Sliding Door Track Assembly No. 10 in mill aluminum ties 3 ft length, 1/2 in door compatibility, and four #33 button glides into one sliding door hardware solution. For projects using 1/2 in thick wood or glass doors, the serrated finished fascia and defined aluminum path let you plan openings around a known sliding action. Choose EPCO part 10-A-3 when you want a track assembly that aligns door thickness, appearance, and smooth movement in a single, consistent configuration.