Sliding Door Track Assembly No. 10, 4' Length Mill Aluminum

Sliding Door Track Assembly No. 10 For Smooth Panels

Sliding Door Track Assembly No. 10 is an EPCO sliding door hardware solution designed for 1/2 inch thick wood or glass doors, so it matches common panel builds in cabinet, closet, or partition work where that thickness is standard. The 4 ft long aluminum track provides a continuous running surface along shorter openings, which helps keep smaller panels tracking consistently without extra splices. Mill aluminum construction gives a rigid channel, which helps the track stay straight under normal door loads. The serrated face is designed to provide an attractive finished fascia, so the visible edge looks purposeful when exposed on built-ins or room dividers. Four No. 33 button glides provide a smooth sliding action by spacing the door from the track contact surface, which reduces friction at the running interface. This combination of track and glides forms a matched sliding path, which simplifies planning for door clearances and movement.

Key Sliding Track Details That Support Install Work

• The 4 ft long aluminum track spans modest openings in one piece, which helps maintain alignment when mounting to straight substrates in cabinets or wall framing.
• Design for 1/2 inch thick wood or glass doors ties directly to common panel stock and glass sizes, which makes door edge detailing and channel layout more predictable.
• The serrated face creates an attractive finished fascia, which reduces the need for extra trim pieces when the track edge is visible in the final installation.
• Four No. 33 button glides provide a smooth sliding action, which supports repeatable door travel along the track during everyday use.
• Mill aluminum material forms a stable channel, which supports long-term straightness of the running surface in typical interior environments.

Sliding Door Track Installation And Alignment Points

This EPCO Sliding Door Track Assembly No. 10 centers on a 4 ft long aluminum channel, so layout revolves around positioning that length square and level to the opening edges. Because the track is designed for 1/2 inch thick wood or glass doors, door preparation focuses on that thickness, which simplifies edge work and overlap planning. The serrated face is intended as a finished fascia, so it can be oriented where the profile remains visible without additional facing materials. Four No. 33 button glides interface with the track, guiding how the doors contact and ride on the running surface. This defined track-and-glide pairing supports consistent clearances between panel and frame, which helps reduce rubbing at the top edge over the travel range.

Where This No. 10 Track Fits And Why It Matters

Track Assembly For 1/2 Inch Wood Or Glass Doors

This Sliding Door Track Assembly No. 10 is described for 1/2 inch thick wood or glass doors, so it aligns with panel builds using half-inch cores or glass panels brought to that dimension at the mounting edge. That thickness callout focuses the application on doors sized for lighter to medium interior use, such as cabinets, closet fronts, or partitions where a 4 ft long aluminum track provides adequate span. Mill aluminum material can be integrated into painted or natural-finish projects, because the neutral metallic finish works as a visible fascia or behind a valance. The serrated face is designed to provide an attractive finished fascia, so the track can sit exposed along the top of an opening without an added cover, which saves a step when designing simple straight runs. Four No. 33 button glides provide a smooth sliding action on the running surface, which supports controlled movement of panels sized appropriately for the track length.

Details That Support Smooth Sliding Action And Results

The 4 ft long aluminum track in this EPCO sliding door track assembly creates a continuous guide, which reduces joint transitions that can interrupt small door panels as they slide. Mill aluminum construction offers a stable geometry along that length, which helps maintain door alignment between jambs or cabinet sides under typical interior loads. The serrated face is designed to provide an attractive finished fascia, so the visible edge of the track also functions as part of the design line along the opening. Four No. 33 button glides provide a smooth sliding action by running against the track in a controlled contact pattern, which reduces drag compared with raw material sliding directly on the channel. Matching the track to 1/2 inch thick wood or glass doors keeps the glide-to-panel relationship consistent, which helps support repeatable travel and reduces the tendency for uneven engagement across different doors in the same opening.

Common Questions About This EPCO Sliding Track

Choose This No. 10 Track For 1/2 Inch Door Runs

The EPCO Sliding Door Track Assembly No. 10 provides a 4 ft long aluminum channel tailored for 1/2 inch thick wood or glass doors, so it aligns directly with many cabinet and partition layouts. The serrated face is designed to provide an attractive finished fascia, which supports exposed-track designs without extra trim. Four No. 33 button glides provide a smooth sliding action along the mill aluminum track, tying door movement to a defined running surface. For projects built around half-inch panels and shorter sliding spans, this No. 10 assembly from Wurth Baer Supply offers a focused sliding track option ready for integration into your next opening.