Sliding Door Track Assembly No. 10 For 1/2 Inch Doors

Sliding Door Track Assembly No. 10 is a mill aluminum sliding door track designed for 1/2 inch thick wood or glass doors, so it suits common panel builds on closet, cabinet, and partition projects. The 6 ft long aluminum track spans a typical opening, allowing continuous support along the full travel path of the door. The track is produced in aluminum, which keeps weight down while providing a rigid guide channel over the 6 ft length. The serrated face is designed to provide an attractive finished fascia, so the visible edge looks more intentional than a plain cut extrusion when the track is exposed. Four #33 button glides provide a smooth sliding action, which helps the door move consistently along the track when opening or closing. This complete sliding track assembly supports practical door movement where a straight, predictable slide is needed.

Key EPCO Track Details For Sliding Performance

• The 6 ft long aluminum track provides continuous guidance over a standard span, helping the door travel without binding or unsupported sections during movement.
• The track is for 1/2 inch thick wood or glass doors, so one assembly can be used across mixed-material projects that keep to this thickness.
• Mill aluminum construction creates a consistent, machined surface, supporting smoother glide contact and a uniform appearance along the fascia line.
• The serrated face is designed to provide an attractive finished fascia, giving the exposed front of the track a more finished look on open-front installations.
• Four #33 button glides provide a smooth sliding action, so each door panel rides on defined contact points rather than dragging along the metal.

Installation Use For 6 Ft Aluminum Sliding Track

The 6 ft long EPCO aluminum track installs as a straight guide for 1/2 inch thick wood or glass doors, giving you a defined path for panel movement across a typical opening. Mill aluminum construction provides a consistent surface for mounting alignment across the 6 ft run. The serrated face is designed to provide an attractive finished fascia, so the visible front edge of the track doubles as a trim element in door layouts where the track is not concealed. Four #33 button glides provide a smooth sliding action along the track, reducing resistance as the door is moved back and forth in routine use. This sliding door track assembly is positioned within EPCO sliding door hardware, matching projects that call for controlled, linear door motion instead of hinged swing.

How This EPCO Sliding Door Track Works In Practice

Track Assembly No. 10 For Wood Or Glass Doors

This Sliding Door Track Assembly No. 10 from EPCO is specified for 1/2 inch thick wood or glass doors, which places it in a size range used on many interior sliding applications. Using one track profile that handles both wood and glass simplifies hardware selection where different panel materials are planned at the same thickness. The mill aluminum body carries the door glides along a fixed path, helping keep the panel aligned during travel. At 6 ft long, the track spans a broad opening with one continuous piece, which reduces joints that could cause a catch point. The serrated face is designed to provide an attractive finished fascia, allowing the track to sit in visible locations without looking unfinished. Within EPCO sliding door hardware, this assembly serves as the primary upper guide surface for door movement along the opening.

Serrated Fascia And Button Glides For Smoother Travel

The serrated face on the aluminum track is designed to provide an attractive finished fascia, giving the front of the track a more structured profile that can visually match other linear elements in the installation. This fascia-style face matters on jobs where the track edge is at eye level and part of the visible trim. Four #33 button glides provide a smooth sliding action along the track, so the door rides on defined, low-friction contact points instead of dragging along raw metal. With four glides handling the sliding interface, door movement feels more even along the full 6 ft length. Combined, the milled aluminum surface, serrated fascia face, and #33 button glides create a sliding path aimed at predictable movement for 1/2 inch thick wood or glass doors in everyday use.

Common Questions About EPCO 10-A-6 Sliding Track

Select Sliding Door Track Assembly No. 10 For 1/2 Inch Panels

Choosing the Sliding Door Track Assembly No. 10 in 6 ft mill aluminum gives you a defined solution for 1/2 inch thick wood or glass doors where straight, guided movement is required. The aluminum track length supports common spans with a single continuous run, while the serrated face is designed to provide an attractive finished fascia on visible installations. Four #33 button glides provide a smooth sliding action along the track, supporting everyday use where repeatable door travel matters. For projects calling for EPCO sliding door hardware in this size range, this assembly aligns the door with a consistent path from end to end.