Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sliding Door Track Assembly No. 11 is an EPCO sliding door hardware solution designed for 3/4 inch thick wood or glass doors, so it targets a common panel thickness in cabinet and furniture projects. The 3 foot long aluminum track spans shorter openings or individual cabinet sections, which helps standardize layouts around a predictable run. Its mill aluminum construction offers a stable, rigid guide surface, supporting repeatable sliding motion over the full length of travel. The serrated face is designed to provide an attractive finished fascia, allowing the track to act as both a functional guide and a visible trim element in the installation. Four No. 33 button glides are specified to provide a smooth sliding action, so the mating door panel rides consistently along the track without grabbing or hesitation under normal loads.
This EPCO sliding door track assembly is configured around 3/4 inch thick wood or glass doors, so door selection and edge preparation can be matched directly to that thickness for consistent tracking. The 3 foot long aluminum section defines the travel path, which supports layouts where the opening width suits a single continuous run without joints. The serrated face, described as providing an attractive finished fascia, is intended to face outward in the final orientation so the visible edge presents a uniform profile. The four No. 33 button glides are paired with the track to yield a smooth sliding action, meaning the door edge engages multiple low-friction contact points instead of running directly against metal.
The aluminum 3 foot long track suits projects where a defined, moderate-span sliding path is needed, such as shorter cabinet runs or interior casework openings. Because it is specified for 3/4 inch thick wood or glass doors, it fits well into applications built around that common material size, from cabinet doors to small sliding panels. The serrated face is designed to provide an attractive finished fascia, making the profile appropriate for exposed mounting where the track becomes part of the visible trim line. In use, the mill aluminum construction offers a consistent, straight channel for the button glides to follow, so the door position remains aligned along the full travel.
The use of four No. 33 button glides to provide a smooth sliding action spreads load and contact along the edge of the 3/4 inch door, which promotes steady, controlled motion instead of point loading at a single contact. This configuration supports repeatable door travel each time the panel is moved, which is important where doors are cycled frequently. The 3 foot long aluminum track provides a continuous guiding surface, reducing transitions that could interrupt movement along the way. The serrated face, described as providing an attractive finished fascia, also yields a defined front profile that can help installers visually align the track straight with adjacent components, supporting cleaner layout lines. Together, the track and button glides form a matched path-and-carrier system focused on smooth action.
This sliding door track assembly is described as for 3/4 inch thick wood or glass doors, so it is intended to work with panels built to that thickness in cabinet or similar applications.
The Sliding Door Track Assembly No. 11 is 3 feet long, giving a defined sliding span suitable for shorter cabinet openings or single-door runs without joints in the track.
The EPCO 11-A-3 track is described as aluminum with a mill aluminum finish, providing a straight, rigid guide surface and a consistent appearance along the visible edge.
The four No. 33 button glides provide a smooth sliding action by placing low-friction contact points between the 3/4 inch door and the aluminum track for controlled travel.
The serrated face is designed to provide an attractive finished fascia, so the exposed front of the track presents a deliberate, finished profile in visible installations.
The 11-A-3 part number identifies this specific EPCO Sliding Door Track Assembly No. 11 in a 3 foot long aluminum version configured for 3/4 inch thick doors.
The EPCO Sliding Door Track Assembly No. 11, part number 11-A-3, combines a 3 foot long aluminum track with four No. 33 button glides to support smooth sliding for 3/4 inch thick wood or glass doors. Its serrated face is designed to provide an attractive finished fascia, allowing the profile to function as both guide and visible trim in cabinets or similar casework. For projects built around 3/4 inch thick sliding panels and moderate-span openings, this assembly provides a defined, mill aluminum track path and matched glides ready to be integrated into the sliding door layout.
Sold In: 1 Each
