Sliding Door Track Assembly No. 11, 6' Length Mill Aluminum

Sliding Door Track Assembly No. 11 For 3/4 Inch Doors

Sliding Door Track Assembly No. 11 is a mill aluminum sliding door hardware solution designed for 3/4 inch thick wood or glass doors, so it fits common cabinet and closet door builds in shops and on job sites. The 6 ft long aluminum track spans typical wider openings in one run, reducing joints that can interrupt door travel. The serrated face is designed to provide an attractive finished fascia, so the visible edge of the installation looks clean once the track is mounted. Four #33 button glides provide a smooth sliding action along the track, which helps doors move consistently when opened and closed. The EPCO brand and assigned manufacturer part number 11-A-6 identify this specific track assembly for repeat ordering and matching to job specifications.

Key Sliding Door Track Details That Matter

• The track is designed for 3/4 inch thick wood or glass doors, giving installers a defined door thickness target for building or selecting panels for the opening.
• The 6 ft long aluminum construction spans a wider run, which helps support longer doors with a continuous sliding surface across the opening.
• The serrated face is designed to provide an attractive finished fascia, so the exposed front of the track presents a more finished appearance on visible installations.
• Four #33 button glides provide a smooth sliding action, so doors can travel along the track with consistent movement during everyday use.
• The EPCO Sliding Door Track Assembly No. 11 is classified as sliding door hardware, aligning it with other builders hardware used for sliding door projects.

Mill Aluminum Track Setup For Smooth Door Travel

The mill aluminum construction of Sliding Door Track Assembly No. 11 provides a formed guide surface that works with the four #33 button glides to support smooth sliding door travel. The 6 ft length gives a continuous route for the glides, which reduces transition points that could interrupt motion. Its serrated face is designed to provide an attractive finished fascia, so the visible edge of the track can integrate into finished millwork without separate trim. Designed for 3/4 inch thick wood or glass doors, the track assembly sets a clear target thickness, helping installers keep door construction aligned with the intended running clearance.

Using This EPCO Track Assembly In Real Projects

Where This Sliding Door Track Assembly Fits Best

This EPCO sliding door track assembly is designed for 3/4 inch thick wood or glass doors, which aligns with many cabinet, closet, and room-divider door constructions in woodworking projects. The 6 ft long aluminum track supports wider openings, so one length can bridge across larger spans where shorter tracks would require joints. Its serrated face is designed to provide an attractive finished fascia, which lets the track act as both functional hardware and visible fascia in installations where the front edge remains exposed. As sliding door hardware in the builders hardware category, this track assembly integrates into sliding door systems where a guided upper path and defined door thickness are required. The four #33 button glides provide a smooth sliding action within the track, helping the doors move along the opening with consistent resistance. When paired with 3/4 inch thick wood or glass doors, the assembly creates a dedicated sliding path suited to that thickness, so the doors operate within the dimensional range for which the track was intended.

Why These Sliding Door Track Details Support Workflow

The 6 ft length of the aluminum track allows installers to work with a single continuous piece over many standard openings, which can reduce layout time compared to aligning multiple shorter tracks. Designing the assembly for 3/4 inch thick wood or glass doors gives a clear door thickness target, so shop-built panels can be sized to match the intended sliding hardware. The serrated face is designed to provide an attractive finished fascia, which can help reduce finishing steps when the track front edge serves as a visible trim line. Four #33 button glides provide a smooth sliding action, so doors can move reliably along the track during repetitive use. Identifying the product as EPCO Sliding Door Track Assembly No. 11 with part number 11-A-6 supports ordering consistency, which helps maintain the same track and glide combination across multiple openings on a project.

Common Questions About EPCO Sliding Door Track Assembly

Choose This Track Assembly For 3/4 Inch Sliding Doors

Specify EPCO Sliding Door Track Assembly No. 11 when a 6 ft mill aluminum track is needed for 3/4 inch thick wood or glass sliding doors. Its serrated face is designed to provide an attractive finished fascia, and four #33 button glides provide a smooth sliding action for the doors. Using the defined door thickness, length, and part number 11-A-6 streamlines planning and repeat ordering for sliding door hardware projects.