Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sliding Door Track Assembly No. 11 is a mill aluminum sliding door hardware track designed for 3/4 inch thick wood or glass doors, so it fits common cabinet and panel door builds in shops and job sites. The 4 foot length provides a continuous running surface, which supports smooth travel across typical cabinet, closet, or partition openings without splicing shorter pieces. The serrated face is designed to provide an attractive finished fascia, so the visible edge looks clean when the track is exposed in finished millwork. Four #33 button glides provide a smooth sliding action, so doors move easily along the track under normal hand operation. The EPCO brand and manufacturer part number 11-A-4 identify this specific track assembly, which helps match it to drawings, cut lists, or previous installs that call out this exact hardware.
This EPCO sliding door track assembly is designed around 3/4 inch thick doors, so both wood and glass panels can be sized to that thickness for proper fit at the track interface. The 4 foot length allows the installer to mount the track as a single continuous piece, which helps maintain straight alignment over the entire opening. The serrated face is designed to provide an attractive finished fascia, so it presents a defined edge when the track is oriented toward the room side in surface or face-mounted applications. The four #33 button glides provide a smooth sliding action, so once mounted, the door rides directly on hardware intended for this specific track profile and length.
This EPCO No. 11 sliding door track assembly is for 3/4 inch thick wood or glass doors, which aligns with many cabinet, closet, and partition door builds that use standard three-quarter-inch material. The 4 ft long aluminum track supports openings up to that span in a single run, so fabricators can design casework or panels around that clear dimension. The serrated face is designed to provide an attractive finished fascia, giving the installer a track edge that integrates visually with millwork when the profile is left visible. The four #33 button glides provide a smooth sliding action, so this hardware suits applications where doors will be cycled frequently during day-to-day use. The mill aluminum finish offers a straightforward metallic look that coordinates easily with a variety of interior hardware choices.
The specific 3/4 inch door thickness design sets a consistent standard for panel construction, so shops can repeat door builds with predictable fit to the EPCO sliding door track assembly. The 4 foot length of the track keeps the running surface continuous, which supports even glide performance across the opening because the door rolls on a single profile. The serrated face is designed to provide an attractive finished fascia, giving a textured frontal area that helps the track present as part of the finished trim detail instead of raw hardware. The four #33 button glides provide a smooth sliding action, so contact points between the door and track are defined by matched components rather than improvised gliding pieces. The mill aluminum material keeps the track light but rigid, which suits fabrication, handling, and mounting on typical cabinet and partition structures.
The Sliding Door Track Assembly No. 11 is designed for 3/4 inch thick wood or glass doors, so door construction can follow that dimension for proper engagement with the track.
The EPCO Sliding Door Track Assembly No. 11 is 4 ft long, providing a single continuous track span suited to many cabinet, closet, and partition openings.
The Sliding Door Track Assembly No. 11 is mill aluminum, providing a rigid metallic running surface with a neutral appearance for interior woodworking projects.
The serrated face is designed to provide an attractive finished fascia, so the exposed front of the track presents as a finished detail on cabinets or partitions.
The Sliding Door Track Assembly No. 11 uses four #33 button glides to provide a smooth sliding action, giving doors defined contact points along the aluminum track.
The manufacturer part number for this EPCO Sliding Door Track Assembly No. 11 is 11-A-4, which identifies this specific 4 ft mill aluminum track configuration.
The Sliding Door Track Assembly No. 11 from EPCO combines a 4 ft mill aluminum track, design for 3/4 inch thick wood or glass doors, a serrated finished fascia, and four #33 button glides. Those details support straightforward layout for openings built around a 4 ft span and standard three-quarter-inch door material. When projects call for a defined aluminum running surface with an attractive serrated face, this 11-A-4 track assembly provides a clearly specified option that aligns hardware selection with drawings and shop standards.
Sold In: 1 Each
