Sliding Door Track Assembly No. 13, 5' Length Brown

Sliding Door Track Assembly No. 13 For Light Doors

Sliding Door Track Assembly No. 13 is a plastic track and guide system designed for 1/2 inch thick wood or glass doors, so it targets small and light doors where a compact sliding solution is needed. The 5 foot long track spans typical cabinet or small opening widths in one continuous run, which helps maintain smooth door travel across the full opening. The high impact, extruded polystyrene construction provides a rigid sliding path, supporting day-to-day door movement without metal-to-metal contact. A brown finish on the track visually ties in with many wood tones, helping the hardware sit back in finished work. Four No. 33 button glides run inside the track to create a smooth sliding action, which reduces drag when opening or closing the door. The system uses EPCO Plastic Upper Guide No. 2212 together with Plastic Track No. 212, giving installers a defined component set tailored to this assembly.

Track System Details That Support Smooth Sliding

• The design for 1/2 inch thick wood or glass doors focuses the fit on a specific door thickness, which helps the door sit correctly in the opening and track.
• The recommendation for small and/or light doors aligns the assembly with modest door loads, which suits cabinet, closet, or similar lighter-duty sliding installations.
• The 5 foot long plastic track allows a single piece to span many openings, which reduces joint transitions that can interrupt smooth door travel over the run.
• The high impact, extruded polystyrene material creates a defined sliding channel, which supports the glides and helps maintain consistent motion over time.
• The four No. 33 button glides provide a smooth sliding action within the track, which reduces friction at contact points between the door and hardware.
• The brown color on the track system visually coordinates with many wood finishes, which helps the hardware blend into the surrounding cabinet or casework.

Installation Use Of EPCO Sliding Door Track

The EPCO Sliding Door Track Assembly No. 13 uses a high impact, extruded polystyrene track, so installers work with a plastic profile that can be positioned accurately along a 5 foot run. The configuration for 1/2 inch thick wood or glass doors means the door edge and guide relationship is defined, which supports consistent panel alignment within the opening. Four No. 33 button glides interact with Plastic Track No. 212 to create sliding motion, so doors ride on dedicated glides instead of the track surface alone. Plastic Upper Guide No. 2212 completes the guiding system at the top, which helps hold the door in line during sliding. The recommended use on small and/or light doors places this assembly in lighter-duty sliding applications, giving installers a clear role for the product within their hardware layout.

How This EPCO Track Assembly Fits Real Projects

Sliding Door Track Assembly No. 13 In Use

Sliding Door Track Assembly No. 13 is specified for 1/2 inch thick wood or glass doors, so it fits projects using uniform panel thickness such as light cabinet or casework doors. The 5 foot long plastic track supports openings up to that length in a continuous profile, which helps keep the sliding path straight on built-ins or smaller room dividers. Because the system is recommended for small and/or light doors, it suits applications where door panels are modest in size and weight rather than full-scale structural doors. The high impact, extruded polystyrene construction creates a stable track channel under those lighter loads, giving the No. 33 button glides a defined surface to run against. Using EPCO Plastic Upper Guide No. 2212 with Plastic Track No. 212 ties door guidance to known component shapes, which supports repeatable layouts across multiple similar openings.

Details That Support Smooth, Repeatable Sliding Action

The high impact, extruded polystyrene material used in the track provides a consistent interior profile, which helps each No. 33 button glide travel with similar resistance along the full 5 foot length. That smooth sliding action matters where frequent door movement is expected, because the glides manage contact points instead of the door edge scraping against the track body. The system focus on 1/2 inch thick wood or glass doors keeps the interaction between door and Plastic Upper Guide No. 2212 predictable, which supports cleaner reveals and reduced side play. The recommendation for small and/or light doors aligns door size and weight with the plastic track and glide design, which helps the assembly operate within its intended load range. With Plastic Track No. 212 as the defined running surface, installers can repeat spacing and alignment from job to job using the same EPCO configuration.

Common Questions On EPCO Sliding Track System

Select This Track Assembly For 1/2 Inch Light Doors

Choose Sliding Door Track Assembly No. 13 when the project calls for a brown, 5 foot long, high impact plastic track system dedicated to 1/2 inch thick wood or glass doors. The defined use on small and/or light doors, combined with EPCO Plastic Upper Guide No. 2212, Plastic Track No. 212, and four No. 33 button glides, creates a focused solution for lighter sliding openings. Use this assembly where a plastic track and guide system offers a smooth sliding action and a color that coordinates with surrounding woodwork.