Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sliding door track assembly no. 13 is a plastic 3 ft long track and guide system for 1/2 in thick wood or glass doors, so it suits short cabinet or furniture openings that match that door thickness. The track is part of EPCO sliding door hardware, which places it squarely in builders hardware for sliding applications where space is limited. The system is recommended for small and light doors, so it serves well where heavy-duty commercial hardware is not required. Its brown finish helps the track blend with darker casework, which keeps the hardware visually quiet in finished installations. The assembly is identified as Manufacturer Part 13-BR-3, giving a precise reference when matching to plans or reordering. As sliding door hardware, it supports straightforward side-to-side door movement rather than hinged swing, valuable wherever front clearance is tight.
This plastic track and guide system functions as sliding door hardware, so it is intended to be fixed to casework where a straight, 3 ft long slide path is needed. The track and guide arrangement supports 1/2 in thick wood or glass doors, which means layout and cuts can be planned around that door thickness for proper engagement. The EPCO sliding door track design works with small and light doors, fitting installations where panel size and weight stay within that lighter range. As a 3 ft long assembly, it suits cabinets or similar structures with openings around that width, keeping the installed hardware aligned with the door travel.
This EPCO sliding door track assembly is classified as sliding door hardware in the builders hardware category, so it is positioned for use on cabinets and similar structures requiring lateral movement. With its 3 ft long plastic track, it naturally aligns with case openings near that width, providing a defined run for door panels. The design targets 1/2 in thick wood or glass doors, which means panels cut to that thickness will sit properly in the routing of the track and guide. Because it is recommended for small and light doors, it fits best where door height and width stay modest, such as upper cabinets, small storage units, or furniture pieces. The brown plastic track can coordinate with darker woods or finishes, helping the hardware appear more integrated when the doors are in the closed position. As part of a track and guide system, it supports smooth side-to-side motion that keeps door swing clear of the user space in front of the cabinet.
The high impact, extruded polystyrene track provides a shaped channel that resists everyday contact while guiding the sliding movement of the doors. Four #33 button glides provide a smooth sliding action, giving the door panels discrete contact points that run along the plastic surface instead of dragging broadly, which helps maintain a consistent feel over time. The assembly uses Plastic Upper Guide #2212 and Plastic Track #212, so the upper support and base track are matched components within the EPCO system, aiding alignment between top guiding and bottom gliding paths. This matched track and guide system helps keep 1/2 in thick wood or glass doors centered as they slide, supporting repeatable door travel without binding when installed to suit its small and light door recommendation. Together, the track material, specified button glides, and defined upper and lower plastic profiles provide a coordinated sliding path sized for the 3 ft opening length.
The sliding door track assembly No. 13 is for 1/2 in thick wood or glass doors, so panels at that thickness sit properly in the guide system during operation.
The EPCO track assembly is 3 ft long, so it suits cabinet or furniture openings that are designed around a 36 in sliding path.
This sliding door track system is recommended for small and light doors, aligning it with lighter cabinet or furniture applications rather than heavy panels.
The track and guide system uses high impact, extruded polystyrene plastic, providing a shaped channel suitable for repeated sliding contact.
Four #33 button glides provide a smooth sliding action, giving the door panels defined low-friction contact points along the plastic track.
The system uses Plastic Upper Guide #2212 with Plastic Track #212, so the top guide and bottom track are matched EPCO components for coordinated movement.
The EPCO sliding door track assembly No. 13, in brown, provides a plastic 3 ft long track and guide system specifically for 1/2 in thick wood or glass doors, giving a defined solution for small and light sliding panels. High impact, extruded polystyrene track material, four #33 button glides, Plastic Upper Guide #2212, and Plastic Track #212 all work together as a coordinated sliding door hardware set. For cabinet or furniture projects within that size and thickness range, this sliding door track assembly offers a focused option ready to be matched to your layout.
Sold In: 1 Each
