Sliding Door Track Assembly No. 13, 3' Length Tan

Sliding Door Track Assembly No. 13 For Small Doors

Sliding Door Track Assembly No. 13 sets up a complete upper track and guide system for small and light sliding doors where a compact, controlled glide is important. The assembly is designed for 1/2 inch thick wood or glass doors, so installers can match it to doors already sized to that thickness. The plastic track length is 3 feet, giving enough run for many short cabinet, closet, or partition openings. A tan color helps this system blend into light casework or trim where a low-visibility track is preferred. The track and guide system is plastic, so contact between door and hardware remains quiet during movement. This configuration suits projects where a straightforward, top-guided slide is needed without complex hardware layouts.

Key Track System Details For Daily Use

• The system is recommended for small and light doors, which directs it to cabinets or short openings where door weight stays modest and movement stays controlled.
• The assembly uses a high impact, extruded polystyrene track and guide system, giving a plastic running surface that resists everyday knocks while keeping door travel smooth.
• The 3 foot long plastic track works on shorter spans, matching many wall cabinet, counter, or small closet openings without field-splicing a longer section.
• The tan track and guide finish lets the sliding hardware sit visually in the background, supporting clean casework lines when doors are open or closed.
• The system contains four #33 button glides that create a defined sliding path, so the door rides on specific points instead of dragging across a broad surface.
• The assembly uses Plastic Upper Guide #2212 with Plastic Track #212, pairing matched EPCO components for consistent fit between guide and running channel.

Sliding Track Assembly Details For Straight Runs

The 3 foot long Plastic Track #212 provides a continuous top channel for the door, so installers can cut or position a single piece over the opening. The track is made from high impact, extruded polystyrene, which keeps the sliding contact between door and hardware on a shaped plastic profile. For 1/2 inch thick wood or glass doors, the geometry of Track #212 and Plastic Upper Guide #2212 supports that specific thickness, helping the door stay aligned in the opening. Four #33 button glides interface with the track and guide system, giving defined contact points that support smoother travel than a bare edge. With this integrated plastic setup, the sliding action stays focused at the upper edge of the door.

Using This EPCO Track Assembly In Real Projects

Where Sliding Door Track Assembly No. 13 Fits Best

This EPCO sliding door track assembly targets small and light doors, so it suits compact openings in cabinets, built-ins, or short partitions. Because it is for 1/2 inch thick wood or glass doors, it fits projects that standardize on that panel thickness across multiple openings. The 3 foot track length aligns with many single-bay cabinet spans, making it practical for one-door or two-door layouts within that width. Tan color helps this hardware match light interiors or painted casework where metal tracks might stand out visually. The plastic track and guide system is appropriate anywhere a quiet, non-metallic sliding feel is desired, such as residential living areas or finished office casework. In combination, the door thickness requirement, length, and recommended door size define its best fit in small opening applications.

How Track, Glides, And Guides Support Smooth Travel

The high impact, extruded polystyrene Plastic Track #212 gives a consistent channel profile, so each #33 button glide contacts the same shape along the full 3 foot run. That uniform channel keeps sliding resistance predictable from end to end. Four #33 button glides spread the door support across multiple contact points, reducing point loading on any single area and helping movement feel even. Plastic Upper Guide #2212 is matched to Track #212, so the guide and track interface is engineered as a system rather than mixed parts, which supports steady alignment. Because the system is recommended for small and light doors, the load on the plastic track, guide, and button glides stays within a range suited to the material. As the door moves, this combination of matched plastic components and button glides provides a simple track solution for frequent sliding cycles on modest door sizes.

Common Questions About This Sliding Track System

Select Sliding Door Track Assembly No. 13 For 1/2 Inch Doors

Sliding Door Track Assembly No. 13 provides a focused solution when a 3 foot long, tan sliding system is needed for 1/2 inch thick wood or glass doors. With high impact, extruded polystyrene construction and coordinated EPCO components, it supports small and light doors on a defined plastic channel. The four #33 button glides, Plastic Upper Guide #2212, and Plastic Track #212 work together wherever a straightforward, compact sliding door setup is planned. For projects built around modest door sizes and quiet, plastic-based movement, this assembly offers a clearly specified track and guide configuration ready for integration into the overall design.