Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sliding Door Track Assembly No. 13 is an EPCO sliding door hardware set designed for 1/2 inch thick wood or glass doors, so installers can standardize on one track solution across different door materials in this thickness range. The track and guide system is recommended for small and/or light doors, which helps keep the running gear matched to lighter door loads rather than oversizing components. A 6 ft long plastic track and guide layout supports typical cabinet, closet, or partition spans up to that length in a single run, reducing joints that could affect door travel. The assembly uses a high impact, extruded polystyrene track and guide system, providing a molded plastic running surface that resists chipping under normal sliding contact. Four #33 button glides provide a smooth sliding action, so doors travel along the opening with less drag at each contact point.
The high impact, extruded polystyrene track and guide system gives installers a consistent plastic profile to mount, which supports predictable clearances as doors slide. For 1/2 inch thick wood or glass doors, the Assembly No. 13 layout aligns the running components with this thickness, helping maintain uniform edge engagement when doors are hung. Four #33 button glides work with the track geometry to carry door movement, so the sliding action follows the molded channel rather than wandering. A 6 ft long track allows a single straight piece to span many small and/or light door openings, limiting joints that could interrupt travel. Tan coloration on the plastic components keeps the track visually recessive at the opening edge, so attention stays on the doors rather than the hardware.
This Sliding Door Track Assembly No. 13 is specified for 1/2 inch thick wood or glass doors, so it fits projects where that thickness is consistent across panels. The recommendation for small and/or light doors aligns the track with cabinets, closets, or lightweight partitions where heavy-duty overhead hardware is not required. A 6 ft long plastic track gives enough length for many single-span openings, supporting layouts where two or more 1/2 inch doors slide past each other within that run. The high impact, extruded polystyrene track and guide system provides a molded route for the four #33 button glides, creating a controlled path that keeps the doors following the same line every cycle.
Because the track and guide system is plastic, contact between the four #33 button glides and the running surface takes place on compatible materials, which supports repeatable motion during standard door use. Tan color on the track and guide components helps the installed hardware sit back visually in many interior settings, supporting a cleaner finished look around the opening. The EPCO brand and Assembly No. 13 designation tie this track to a defined sliding door hardware class, helping buyers match it with jobs that call for plastic track and guide systems on small and/or light 1/2 inch doors.
The high impact, extruded polystyrene construction of the track and guide system gives the Sliding Door Track Assembly No. 13 a stable plastic profile that works with repeated gliding contact, supporting consistent door travel over time. Four #33 button glides interact with this shaped track, so the load is carried at several points instead of a single sliding shoe, which can ease movement over the 6 ft run. For 1/2 inch thick wood or glass doors, the matched geometry between the track, glides, and door thickness allows the hardware to hold the panels on a steady line as they open and close.
The 6 ft length reduces the need to break the route into multiple shorter tracks on many openings, which helps avoid transitions that could interrupt gliding. The recommendation for small and/or light doors positions this EPCO sliding door track in applications where door weight aligns with the plastic track and button glide design, helping the assembly operate within its intended duty. Tan finish on the plastic components supports projects where a neutral hardware tone is preferred around the sliding opening.
Sliding Door Track Assembly No. 13 is designed for 1/2 inch thick wood or glass doors, so it aligns the track and guide layout with that specific panel thickness.
The EPCO sliding door track is recommended for small and/or light doors, matching the plastic track and four #33 button glides to lighter door applications.
The Sliding Door Track Assembly No. 13 uses a 6 ft long plastic track, which provides a continuous running surface across many cabinet or closet openings.
The track and guide system is made from high impact, extruded polystyrene, giving a molded plastic running surface for door movement.
The Sliding Door Track Assembly No. 13 uses four #33 button glides within the plastic track, distributing contact points to support smooth sliding action.
The Sliding Door Track Assembly No. 13 is tan, helping the plastic track and guide components present a neutral appearance at the opening.
The EPCO Sliding Door Track Assembly No. 13 pairs a 6 ft long plastic track with a high impact, extruded polystyrene guide system for 1/2 inch thick wood or glass doors, so projects with small and/or light doors gain a defined sliding route. Four #33 button glides work within this tan track to provide smooth sliding action across the opening. For jobs calling for sliding door hardware tuned to lighter 1/2 inch panels, this Assembly No. 13 layout offers a focused track and guide option ready to match that door class.
Sold In: 1 Each
