Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/2 inch sliding track describes this EPCO sliding door hardware designed for 1/2 inch thick wood or glass doors, so it fits common panel materials used in light cabinet or closet applications. The 6 ft long plastic track and guide system spans typical opening widths in one piece, which helps maintain alignment over the entire run. High impact, extruded polystyrene construction creates a rigid sliding path, supporting consistent movement for small and/or light doors. The system uses four #33 button glides to create a smooth sliding action, reducing drag as the door moves along the track. A plastic upper guide #2212 works with the track to keep the door controlled at the top edge, which supports straight, predictable travel. EPCO part 13-BR-6 identifies this walnut finish track for clear jobsite ordering and matching when repeating installations.
The 1/2 inch door design of this sliding track focuses the fit around common wood or glass panel thicknesses, which helps the glides and guides hold the door edge securely without excessive play. Because the track is 6 ft long, it can span many cabinet or closet widths without joints, supporting cleaner alignment between the upper guide and the lower gliding path. The plastic upper guide #2212 works with the plastic track #212 to control the door at both top and bottom, which promotes smoother operation when panels are small and/or light. Four #33 button glides distribute the contact points along the door edge so the door weight is carried at multiple spots, which helps maintain consistent movement as the door travels.
This EPCO 1/2 inch sliding track is specified for 1/2 inch thick wood or glass doors, so it aligns with common panel sizes used in lighter sliding applications. The recommendation for small and/or light doors positions it for upper cabinets, smaller closets, or partitions where panels do not carry heavy loads. High impact, extruded polystyrene track and guide construction keeps both components in the same material family, which supports a predictable interface between the upper guide #2212, the plastic track #212, and the #33 button glides. The walnut finish helps the track sit quietly against similar toned casework, so the focus stays on the door face rather than the sliding hardware.
The 6 ft long plastic track gives each door a continuous travel path, which reduces interruptions that might be felt at joints between shorter sections. Four #33 button glides riding in the track establish multiple contact points, spreading the door movement over several glides so each one carries less load and can move more freely. Because the system is designed as a plastic track and guide pairing, the contact between guide, glides, and track stays within a compatible material set, supporting quieter and more consistent sliding action over time. For repeated installations using the same setup, the EPCO 13-BR-6 part number clearly identifies this walnut finish configuration, helping maintain consistency when the same sliding door hardware is used across multiple openings in a project.
The sliding track is designed for 1/2 inch thick wood or glass doors, so it matches common panel thicknesses used for small and/or light sliding installations.
The EPCO 13-BR-6 sliding track is 6 ft long, allowing a single continuous run across many cabinet or closet openings without joints that could interrupt door travel.
The track system is recommended for small and/or light doors, aligning its design with lighter wood or glass panels typically used in compact openings.
The track uses four #33 button glides in the high impact polystyrene channel, spreading contact points so the door moves smoothly along the 6 ft length.
The system uses a plastic upper guide #2212, a plastic track #212, and four #33 button glides, so the door is guided at top and bottom through the same track layout.
The track and guide use high impact, extruded polystyrene, providing a rigid sliding path suited to repeated movement of small and/or light doors in typical environments.
The EPCO 1/2 inch sliding track in walnut finish ties door thickness, door weight range, and length together, giving small and/or light 1/2 inch wood or glass doors a defined sliding path. The high impact, extruded polystyrene track and guide system, combined with four #33 button glides, is designed to deliver smooth sliding action along the 6 ft run. With plastic upper guide #2212 working over plastic track #212, this EPCO 13-BR-6 configuration provides a clearly identified option when specifying sliding door hardware for lighter panels.
Sold In: 1 Each
