1/2" x 72" Sliding Track, Gray Finish

1/2 x 72 Sliding Track For Compact Doors

1/2 x 72 sliding track describes this EPCO track and guide system designed for 1/2 inch thick wood or glass doors, so it targets a specific door thickness and material for predictable sliding action on small and light doors. The track length of 6 feet gives a continuous guiding surface over typical cabinet or closet spans, which supports smoother travel with fewer interruptions along the run. The gray finish on the plastic track provides a neutral appearance that blends with many casework interiors, helping the hardware stay visually unobtrusive in finished installations. As part of EPCO sliding door hardware, this system is built as a coordinated track, glide, and guide solution, so the door rides on matched components instead of mixed parts from different sources.

Key Sliding Track Details For Daily Use

• The track and guide system is described as high impact, extruded polystyrene, which gives a rigid but lightweight running surface that supports smooth sliding action for small and light doors during repeated openings.
• The 6 FT long plastic track layout reduces the number of joints in a run, which simplifies alignment across the opening and helps doors travel without catching or bumping at transitions.
• Four #33 button glides are specified for smooth sliding action, so each door contacts the track at defined points that spread the load and reduce friction along the travel path.
• The system is noted as recommended for small and/or light doors, guiding installers toward applications where the track material and glides will perform as intended without overstressing the components.
• The gray finish on the plastic components offers a subdued color that sits back visually inside cabinets or enclosures, which keeps attention on the door faces rather than the sliding hardware.

Sliding Track Mounting And Door Fit Basics

This EPCO sliding door hardware is specified for 1/2 inch thick wood or glass doors, so layout work can be planned around a known panel thickness without reworking clearances. The plastic track length of 6 feet supports mounting across common cabinet or case openings in a single run, helping installers position fasteners along a straight, predictable line. The combination of the plastic track and the described button glides forms the main sliding interface, so door placement, overlap, and reveals can be set around that defined running surface. With the system recommended for small and/or light doors, projects can be planned so door size and weight stay within a range that suits the material and glide design.

Using This EPCO Sliding Track In Projects

Where This Sliding Track System Fits Best

This EPCO sliding track for 1/2 inch doors is described as recommended for small and/or light doors, which ties it directly to applications like modest cabinet, closet, or storage openings where door panels are not oversized or heavy. The track is made as a high impact, extruded polystyrene component, so it suits installations where a plastic running surface is appropriate for the surrounding wood or glass materials. Because the system is intended for 1/2 inch thick wood or glass doors, it aligns well with projects that standardize on that door thickness across multiple openings, reducing layout variation from one unit to the next. The gray finish supports use in interiors where a neutral track color is preferred, such as built-in cabinets or furniture pieces where the hardware should visually recede behind the doors. With a 6 FT long plastic track, the system fits openings that benefit from a single continuous run, supporting smooth motion across the full width without mid-span joints.

How Track Components Support Consistent Results

The high impact, extruded polystyrene track provides a uniform profile along its 6 FT length, which helps doors glide along a consistent surface and supports repeatable performance across multiple units using the same part. Four #33 button glides are specified to provide smooth sliding action, giving each door defined contact points that distribute movement rather than relying on broad surface friction. The description notes a plastic upper guide #2212 and plastic track #212, so the upper and lower guiding elements are coordinated parts within the same system, supporting stable tracking as the door moves. Using a track and guide system that is tied to 1/2 inch thick wood or glass doors means the critical alignment between door edge and guiding surfaces can be repeated from one opening to another using the same reference dimensions. The gray finish on the track and guides keeps the hardware appearance consistent across a project, which matters when several openings are visible in the same line of sight.

Common Questions About This Sliding Track Kit

Selecting This Track For 1/2 Inch Door Runs

This EPCO sliding track for 1/2 inch thick wood or glass doors combines a 6 FT high impact, extruded polystyrene track with matching guides and button glides, so door motion is built around a coordinated system rather than mixed parts. For projects using small or light 1/2 inch doors, the gray-finished track and guide components provide a defined sliding path that supports consistent results from one opening to the next.