Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sliding Door Track Assembly No. 13 sets up a guided track system for 1/2 inch thick wood or glass sliding doors, so small and light door panels move on a defined path instead of wandering or rubbing against the cabinet or casework. The EPCO assembly uses a plastic track and guide system, so the sliding surface runs on molded profiles rather than raw wood edges. The 3 foot length gives you a continuous run for shorter openings, helping maintain alignment from end to end on small cabinets or similar projects. The gray color identifies this specific track visually, which helps match it with existing EPCO No. 13 installations on service or expansion jobs. Because the kit is designed for small and light doors, it directs you toward applications where the plastic components operate within their intended load range.
The EPCO Sliding Door Track Assembly No. 13 relies on its high impact extruded polystyrene track, so installers work with a form-stable plastic profile rather than raw aluminum or wood, which helps keep the running geometry consistent once fixed in place. The 3 foot long plastic track gives installers a single piece to position, which simplifies layout for many small cases because there is no joint to align. With four #33 button glides providing the sliding action, each door engages the track at multiple contact points, spreading movement over several glides instead of dragging on a single edge. The Plastic Upper Guide #2212 partners with Plastic Track #212 to control the door vertically, so the panel moves between defined upper and lower guides instead of swinging out of the opening.
The EPCO Sliding Door Track Assembly No. 13 is specified for 1/2 inch thick wood or glass doors, so it pairs naturally with panels built from those materials at that thickness in small cabinets, wall units, or display cases. Because the system is recommended for small and light doors, it targets modest openings where the door size and material keep loads within the range that the high impact, extruded polystyrene track and guide system is designed to support. The gray 3 foot long plastic track aligns with installations that fall at or under that span, so one piece can manage the entire run without introducing breaks in the sliding surface. In use, the four #33 button glides carry the door on defined bearing points, so the door panel can travel along the Plastic Track #212 with a smoother feel than panels sliding directly against wood or painted edges in typical shop-built cases.
The high impact extruded polystyrene construction of the track and guide system establishes a uniform contact surface for the #33 button glides, so the door moves along repeated passes without changing feel from one section of the run to another. The Plastic Upper Guide #2212 combines with the Plastic Track #212 to locate the door along both top and bottom edges, so the panel is held within a channel that resists side-to-side wandering during movement. With four #33 button glides arranged to provide the sliding action, door weight and motion are carried on defined points instead of broad friction surfaces, helping the door start and stop more predictably along the full length. The fixed 3 foot track length also helps maintain alignment between guide and track, because both control elements are set relative to a single, consistent plastic profile.
Sliding Door Track Assembly No. 13 is for 1/2 inch thick wood or glass doors, so panels at that thickness sit correctly in the guide and track system during operation.
Sliding Door Track Assembly No. 13 is recommended for small and light doors, so it suits modest cabinet or display openings using lighter 1/2 inch panels.
The plastic 3 foot long track gives a continuous run across shorter spans, so many cabinets use a single track piece without joints that could interrupt sliding.
The four #33 button glides provide smooth sliding action by carrying the door on defined contact points, so panels move along the track instead of dragging on case edges.
The high impact, extruded polystyrene track and guide system supplies a stable plastic profile, so the sliding surface stays consistent under normal cabinet use.
Plastic Upper Guide #2212 controls the top edge while Plastic Track #212 supports sliding at the bottom, so the door stays guided along a defined path.
The EPCO Sliding Door Track Assembly No. 13, gray, aligns with projects using 1/2 inch thick wood or glass doors where small and light panels need controlled sliding motion. The high impact, extruded polystyrene track and guide system centers the movement on molded contact surfaces, so door travel follows a consistent path from end to end. With a plastic 3 foot long track, four #33 button glides for smooth sliding action, Plastic Upper Guide #2212, and Plastic Track #212, this assembly provides a defined route for door panels in compact openings. Select this No. 13 system when those door thickness, material, and size conditions match your sliding cabinet or casework design.
Sold In: 1 Each
