Sliding Door Track Assembly No. 13, 4' Length Tan
Description
Sliding Door Track Assembly No. 13 For Light Doors
Sliding Door Track Assembly No. 13 is a plastic track and guide system designed for 1/2 inch thick wood or glass doors, so it suits many small cabinet or closet style openings where slim doors are used. The 4 foot long EPCO track gives you a continuous sliding run for shorter spans, which works well for small and light door panels where full-height hardware is not required. The system is recommended for small and/or light doors, so it aligns with applications where heavy-duty metal tracks are not necessary. The assembly uses a high impact, extruded polystyrene track and guide system, which provides a durable plastic running surface for consistent motion along the full length. Four No. 33 button glides provide a smooth sliding action, so door movement feels controlled instead of jerky. The tan color of the plastic track helps it blend into many light wood or neutral casework interiors.
Key EPCO Sliding Track Details For Real Jobs
- The plastic 4 foot long track gives a defined sliding path for shorter runs, which suits small cabinets or openings where a compact system is needed.
- The high impact, extruded polystyrene track and guide system provides a tough plastic bearing surface, which supports repeated sliding without metal-on-wood contact.
- Four No. 33 button glides are specified for the assembly, creating a smooth sliding action that helps doors travel quietly along the track.
- The system is recommended for small and/or light doors, aligning it with upper cabinets, display cases, or light partitions using 1/2 inch door material.
- The tan plastic track finish offers a neutral appearance, which works well when the track sits in light colored casework or against similar-toned surfaces.
Sliding Track Setup For 1/2 Inch Door Panels
This EPCO sliding door hardware is described for 1/2 inch thick wood or glass doors, so door edges sized to that thickness sit correctly in relation to the guide profile. The 4 foot length of the plastic track lets you span common cabinet or small opening widths in a single piece, reducing joints along the sliding path. The high impact, extruded polystyrene construction forms a shaped channel and guide, so glides stay captured as the door moves. Four No. 33 button glides work with the plastic track to create a controlled sliding interface, which supports consistent alignment from end to end. The tan track color is part of the No. 13 assembly description, so finished installations match the specified tone.
How This EPCO Track Works In Daily Use
Sliding Door Track Assembly No. 13 In Application
The SAP description and web description identify this product as Sliding Door Track Assembly No. 13 with a plastic 4 foot long track, so it is intended as a complete track and guide run for one opening of that width. The system is for 1/2 inch thick wood or glass doors, which positions it for light casework, display fixtures, or similar projects using uniform panel material. Being recommended for small and/or light doors, the assembly fits installations where door panels are modest in height and weight, such as cabinet fronts or shallow storage openings. The high impact, extruded polystyrene track and guide system carries the glides in a shaped plastic channel, so doors ride on a defined path rather than dragging on the cabinet bottom. Four No. 33 button glides are specified to provide a smooth sliding action, spacing the load across several contact points so movement feels more even.
Track And Guide Details That Support Smooth Travel
The plastic 4 foot long track length allows the door to travel across the full span in one continuous piece, so there are no track joints to interrupt the motion of the No. 33 button glides. High impact, extruded polystyrene forms both the track and guide system, creating a consistent plastic bearing surface that works together with the button glides throughout the stroke. The description states that four No. 33 button glides provide a smooth sliding action, so each door edge can use multiple glides to share load and reduce point wear on the track. The tan color ties to the No. 13 assembly and EPCO brand description, which helps projects keep a uniform look when matching other tan components in the same installation. The combination of track, upper guide, and button glides creates a defined sliding assembly, so door alignment and travel are governed by the molded plastic profiles rather than by the cabinet floor.
Common Questions About This EPCO Sliding Track
What doors fit Sliding Door Track Assembly No. 13?
Sliding Door Track Assembly No. 13 is for 1/2 inch thick wood or glass doors, so panels sized to that thickness align properly inside the track and guide system.
How long is the EPCO plastic sliding door track?
The EPCO plastic track is 4 foot long, providing a continuous sliding run suitable for small openings or cabinets that fall within that span.
What material is the No. 13 sliding door track made from?
The Sliding Door Track Assembly No. 13 uses a high impact, extruded polystyrene track and guide system, giving doors a durable molded plastic surface to slide on.
How does the track provide smooth sliding action?
The track assembly uses four No. 33 button glides with the plastic track, so the doors move on multiple small contact points that support smooth sliding action.
Is this EPCO sliding track suitable for heavy doors?
This EPCO sliding track is recommended for small and/or light doors, so it suits lighter panels rather than heavy or oversized door constructions.
What is the color of the EPCO No. 13 track?
The Sliding Door Track Assembly No. 13 is described as tan, so the visible track presents a neutral light tone in cabinet or casework installations.
Choose This Track Assembly For 1/2 Inch Doors
Sliding Door Track Assembly No. 13 from EPCO provides a high impact, extruded polystyrene track and guide system tailored to 1/2 inch thick wood or glass doors, so it aligns directly with small and light sliding door projects. The plastic 4 foot long track and four No. 33 button glides deliver the smooth sliding action described in the product data, which helps doors travel predictably across the opening. For jobs calling for a tan sliding track in this length and material, selecting this assembly keeps the hardware matched to the specified EPCO No. 13 configuration.