Closure strip 12ft aluminum from EPCO is a 12 FT long extruded aluminum strip used for trimming mirror seams, so installers can create a continuous, finished line where separate mirror panels meet. The satin clear anodized aluminum matches the Web Description and Product Name, giving the strip a neutral metallic appearance that blends into many mirror and glass installations. The 0.688" width identified in the Web Description provides a defined trim band over the seam, helping cover the gap while keeping a low-profile edge. Being classified under Mirror & Glass Clips and described as used for trimming mirror seams ties this product directly to mirror work where clean edges and transitions are needed. The EPCO brand and specific Manufacturer Part # 2017-A identify this as a repeatable choice for mirror and glass projects when the same trim detail needs to be used job after job.
The closure strip is described as used for trimming mirror seams, so its role in installation is to bridge the space where mirror edges meet and need a clean transition. The 12 FT long extruded aluminum body means fewer joints along the run, which supports straighter alignment when laying out mirror banks or long wall runs. The 0.688" width in the Web Description defines the working coverage area over the seam, letting installers position mirror edges so the strip masks the gap while maintaining consistent reveal. Satin clear anodized aluminum described in the Product Name provides a smooth, metallic surface that sits against the mirror edges, supporting a neat finish line along the top, bottom, or vertical seams of mirrored walls.
This EPCO closure strip is categorized under Mirror & Glass Clips and described as used for trimming mirror seams, so its primary application is along joints between adjacent mirror panels. The 12 FT long extruded aluminum profile supports use on full-height walls or long horizontal bands where a single piece can cover the span without intermediate joints. With a 0.688" width cited in the Web Description, the strip is suited for seams where a modest coverage band is enough to bridge the gap between mirror edges without overpowering the glass surface. The satin clear anodized finish noted in the Product Name aligns with typical mirror trim finishes, making the strip suitable anywhere a neutral metallic edge is preferred around mirrors.
The extruded aluminum construction referenced in the Web Description provides a consistent cross-section over the entire 12 FT length, which helps installers maintain a straight line as they align the trim to mirror edges. Being identified specifically as a closure strip used for trimming mirror seams clarifies that its geometry is intended to sit over the joint, allowing installers to position mirrors with a predictable overlap. The 0.688" width gives a defined design parameter when planning seam placement, helping maintain equal coverage on both sides of the joint along the full length. The satin clear anodized description indicates a finished surface that visually matches many mirror hardware systems, which supports repeatable aesthetics across multiple installations when the same EPCO Manufacturer Part # 2017-A is specified.
The closure strip is described as used for trimming mirror seams, so it covers and finishes the joint where separate mirror panels meet.
The closure strip is 12 FT long, allowing one continuous piece to span extended mirror seams and reduce visible trim breaks.
The Web Description states it is extruded aluminum, providing a uniform profile along its 12 FT length for consistent trim alignment.
The Web Description lists 0.688" width, so the strip covers just over two-thirds of an inch across the mirror seam.
The Product Name specifies satin clear anodized, giving the strip a neutral metallic finish that works with many mirror layouts.
The closure strip is identified by EPCO Manufacturer Part # 2017-A, so the same trim profile can be reordered consistently.
The EPCO closure strip, aluminum 12 FT long with 0.688" width, is specifically described as used for trimming mirror seams, giving installers a defined profile for finishing mirror joints. Satin clear anodized aluminum ties the product to typical mirror and glass trim aesthetics. With a clear product identity under Mirror & Glass Clips and Manufacturer Part # 2017-A, it is straightforward to standardize on this closure strip wherever a consistent mirror seam trim is needed.
Sold In: 1 Each