Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
closure strip aluminum 12ft oil rubbed bronze describes an EPCO closure strip designed for trimming mirror seams, so it finishes the joint where two mirror panels meet along a run. The 12 FT length lets installers span long mirror seams in a single line, which reduces cut joints along the edge. The extruded aluminum construction provides a consistent profile from end to end, supporting straight alignment across the mirror joint. The oil rubbed bronze finish adds a dark, uniform edge appearance along the seam, which matters when matching bronze-toned hardware in the same room. As part of the Mirror & Glass Clips product class, this strip works as edge trim around mirror seams rather than a structural mounting point, helping installers clean up exposed mirror edges in finish stages. The EPCO brand and specific 2017-ORB part number give shops a repeatable reference for reorders and project documentation.
This extruded aluminum closure strip is used for trimming mirror seams, so it sits over or along the joint where mirror panels meet. The 0.688"W dimension sets the width of the trim face, defining how much of the seam area the strip visually covers. With a 12 FT Long profile, installers can run this EPCO strip across wide spans, which supports cleaner alignment when mirrors extend along a wall. Its role within the Mirror & Glass Clips category ties it directly to mirror and glass work, so shops can assign it to finishing crews responsible for edging and seam treatments. The defined oil rubbed bronze finish also guides layout decisions in spaces where finish color continuity across trim elements is important.
This EPCO closure strip is used for trimming mirror seams, so it fits best wherever two mirror panels meet and a finished edge is required along that joint. The 12 FT length lets installers address long runs common in wall-mounted mirror layouts without breaking the visual line. As an extruded aluminum profile within the Mirror & Glass Clips product class, it integrates naturally into mirror and glass projects where edge detailing is part of the scope. The oil rubbed bronze finish targets projects using darker metal tones, matching other bronze-finished elements nearby so the seam trim does not stand out as a mismatched component. The 0.688"W width defines the coverage band across the seam, which helps planners determine how much of the mirror edge transition will be visually masked once installed.
The extruded aluminum construction means the closure strip has a uniform cross-section, which supports consistent seating against the mirror surface along the full 12 FT length. That consistency matters when installers want an even reveal from one end of the joint to the other. The specific EPCO Manufacturer Part # 2017-ORB ties the oil rubbed bronze finish and 12 FT Long length to a single catalog reference, helping shops reorder the same seam treatment for repeat projects or phased build-outs. Listing under Mirror & Glass Clips clarifies that its function is related to mirror trim rather than general-purpose edging, guiding project managers to assign it specifically to mirror seam locations. Together, the 0.688"W face and dark bronze tone define a deliberate visual border at the seam, giving finish carpenters and glaziers a predictable appearance when planning the final line of the mirror installation.
The EPCO 2017-ORB closure strip is used for trimming mirror seams, so it finishes the gap where mirror panels meet and creates a defined edge line along the joint.
The closure strip is 12 FT Long, allowing installers to span extended mirror seams with one continuous piece for a cleaner, uninterrupted trim appearance.
The mirror seam closure strip is made from Extruded Aluminum, providing a consistent profile that supports straight alignment across the length of the mirror joint.
The 0.688"W dimension defines how wide the visible trim face is, indicating how much of the mirror seam area the closure strip will visually cover once installed.
The oil rubbed bronze finish provides a dark bronze tone along the seam, helping installers coordinate mirror edge trim with other bronze-colored hardware in the space.
The 12 FT length lets installers run one continuous extruded aluminum strip along long mirror seams, which supports visual consistency and reduces trim joints.
This EPCO closure strip, identified as Manufacturer Part # 2017-ORB, delivers a 12 FT Long extruded aluminum profile specifically used for trimming mirror seams. The 0.688"W face and oil rubbed bronze finish define the visible band at the joint, supporting planned sightlines in finished spaces. As a Mirror & Glass Clips class product, it aligns directly with mirror and glass work scopes where seam trimming is required. When a project calls for a dark-toned mirror seam edge with a continuous 12 FT run, this closure strip provides a clearly defined option grounded in a repeatable EPCO part reference.
Sold In: 1 Each