closure strip 12ft polished aluminum describes an EPCO extruded aluminum strip designed for trimming mirror seams, so it gives you a clean, finished line wherever two mirror edges meet. The 12 FT Long length lets you span long seams or cut multiple shorter pieces from one run, which helps standardize cuts across similar openings. The polished aluminum anodized finish provides a bright, uniform appearance that visually ties separate mirror panels together. Being part of the Mirror & Glass Clips product class means this strip is sized and shaped for mirror and glass work, so it fits naturally into typical glass layout details. The 0.688"W dimension defines the face coverage over the joint, which controls how much of the cut mirror edge and gap are hidden from view for a consistent look. The EPCO brand and manufacturer part 2017-PA establish a stable reference for repeat ordering on future projects.
The 12 FT Long EPCO closure strip gives you a single continuous length to work from, so you can cut pieces to exact mirror seam runs without being constrained by shorter stock. The 0.688"W face dictates how far the strip extends over the glass edge, which guides how you position mirror panels so the seam falls well within the covered area. The polished aluminum anodized finish defines the final visible line, so it can be aligned with other metal trim or hardware on the wall for a coordinated layout. Because it is extruded aluminum, the strip maintains a consistent cross-section along its length, which helps it sit evenly against the mirror surface wherever it is applied.
This EPCO closure strip is used for trimming mirror seams, so it fits projects where two or more mirror panels meet and a metal trim is needed over the joint. The 12 FT Long format suits wider walls or tall vertical mirror runs, because you can cut custom lengths from a single piece to match site dimensions. The 0.688"W coverage is suited to seams where the joint and edge work fall within that width, allowing the face of the strip to fully cover the line between panels. As a Mirror & Glass Clips class product, it aligns with common mirror layouts, so it works naturally alongside other mirror and glass clip components that define panel position.
The extruded aluminum body keeps the profile the same from end to end, so every piece cut from the 12 FT Long strip seats against the mirror in the same way, which supports repeatable results across multiple seams. The polished aluminum anodized finish stays visually consistent along the face, so adjoining trimmed seams present the same metal tone and reflectivity, which is important when several mirror joints share the same wall. The 0.688"W dimension fixes your visible trim width, so layouts can be drawn and templated around that width for predictable coverage of the seam. Referencing the EPCO manufacturer part 2017-PA on drawings and orders ties field installation back to a specific strip profile, so replacements or additions later can match the original seams closely. Being categorized under Mirror & Glass Clips clarifies its role as part of the mirror and glass trim family, so it is selected specifically for closing mirror seams rather than for unrelated trim tasks.
The EPCO 2017-PA closure strip is used for trimming mirror seams, so it covers the joint between mirror panels with a defined metal strip for a finished appearance.
The closure strip is 12 FT Long, so you can run it across extended mirror seams or cut multiple smaller pieces from one length to match your mirror layout.
The 0.688"W width defines how much of the seam the strip covers, so mirror edges and gaps need to fall within that width for full visual coverage.
The closure strip uses extruded aluminum, giving a consistent cross-section along its length, so each cut piece sits uniformly against the mirror surface.
The polished aluminum anodized finish creates a bright, uniform face on the strip, so mirror seams present a clean metal line that coordinates with other trim.
The Mirror & Glass Clips classification identifies this strip as a mirror and glass trim component, so it aligns with typical mirror seam trimming needs on glass projects.
The EPCO closure strip in polished aluminum anodized finish is used for trimming mirror seams, so it turns raw joints into defined metal lines across your installation. The 12 FT Long, extruded aluminum profile with a 0.688"W face lets you plan seam coverage, cut-to-length segments, and visual alignment around known dimensions. With the EPCO 2017-PA identifier and Mirror & Glass Clips classification, it fits naturally into mirror and glass projects where a consistent, aluminum closure strip is required along panel seams.
Sold In: 1 Each