Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4" x 48" guide/track assembly gives heavier 3/4" thick by-passing wood doors a dedicated bottom running surface, so doors stay guided instead of wandering across the floor. This EPCO sliding door track is 4 FT Long, so it spans standard door openings in one continuous piece, reducing joints that can catch or drag. The track is designed For heavier 3/4" thick by-passing wood doors, so it supports doors that carry substantial weight without changing your door thickness. Bottom track has machined, hardened fiber inserts, so the running surface is stable and consistent instead of wearing unevenly against aluminum. Four fiber glides (#1801) recess into bottom of door and glides easily on track, so doors ride on fiber-to-fiber contact rather than on raw wood, helping doors move smoothly along their path.
This ALU TRK KIT NO.2 FOR 3/4IN DR,4FT L is built as a bottom track system For heavier 3/4" thick by-passing wood doors, so layout starts at the floor or cabinet base instead of at the head. The bottom track has machined, hardened fiber inserts, so installers index their measurements off fixed insert locations for repeatable glide spacing. Four fiber glides (#1801) recess into bottom of door and glides easily on track, so the door edge is machined with pockets that match the fiber insert pattern. Because the track is 4 FT Long Aluminum br, it can be located as a single straight piece, which simplifies snapping lines, drilling pilot holes, and aligning both door panels along the same run.
This 3/4" x 48" guide/track assembly lives in the Builders Hardware and Sliding Door Hardware category, so it suits casework and openings where by-passing doors are part of the build. It is designed For heavier 3/4" thick by-passing wood doors, so it fits scenarios where doors are made from typical 3/4 inch sheet goods or solid stock instead of thin panels. The 4 FT Long Aluminum br length suits many cabinet, closet, or built-in runs near four feet, so doors can travel the full opening width along one continuous guide. Bottom track has machined, hardened fiber inserts, so it works in applications where the base surface needs a defined track path rather than relying on raw flooring. Four fiber glides (#1801) recess into bottom of door and glides easily on track, so this setup is well suited to wood doors that benefit from a smooth, low-friction glide along the bottom edge.
The clear anodized finish on the 3/4" x 48" guide/track assembly gives the aluminum a consistent surface, so the visible edge at the cabinet or floor line reads cleanly in finished work. Because the system is For heavier 3/4" thick by-passing wood doors, door builders can size stiles and rails around standard 3/4 inch construction without redesigning for a special thickness. Bottom track has machined, hardened fiber inserts, so each insert stays dimensionally stable, which helps the four fiber glides (#1801) recess into bottom of door and glides easily on track without developing grooves that throw doors out of level. The 4 FT Long Aluminum br track keeps both by-passing doors running parallel along one continuous piece, so alignment between panels remains consistent from end to end. Being part of Sliding Door Hardware, this EPCO 2-A-4 assembly ties directly into sliding layouts where a guided bottom edge improves door tracking and helps maintain even reveals.
This track assembly is for heavier 3/4" thick by-passing wood doors, so it matches door panels built from standard 3/4 inch material used in many woodworking projects.
The guide/track assembly is 4 FT Long Aluminum br, giving a 48 inch continuous run that supports typical cabinet or closet openings without mid-span joints.
This guide/track assembly functions as the bottom track For heavier 3/4" thick by-passing wood doors, so it installs at the base to guide the door edges.
The bottom track has machined, hardened fiber inserts that provide a defined, durable running surface for the fiber glides, supporting smooth door travel over time.
Four fiber glides (#1801) recess into bottom of door and glides easily on track, so the door rides on fiber against hardened fiber inserts instead of wood against metal.
This 3/4" x 48" guide/track assembly has a clear anodized finish, giving the aluminum a uniform, protective surface that suits visible cabinet and casework installations.
This EPCO 3/4" x 48" guide/track assembly with clear anodized finish ties Sliding Door Hardware directly to heavier 3/4" thick by-passing wood doors, so it brings door thickness, track length, and glide interface together in one coordinated setup. The 4 FT Long Aluminum br bottom track with machined, hardened fiber inserts and four fiber glides (#1801) recess into bottom of door and glides easily on track, so each door operates on a defined fiber-on-fiber path. When a project needs a bottom-guided run that matches 3/4 inch wood doors, this ALU TRK KIT NO.2 FOR 3/4IN DR,4FT L provides a focused sliding solution.
Sold In: 1 Each
