Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sliding door track assembly for 3/4 inch door describes an EPCO sliding door track assembly designed for 3/4 inch thick bypassing wood doors, so installers can match the track directly to common door construction without extra build-ups or adapters. The product is identified as Sliding Door Track Assembly for 3/4" Door No. 2, which ties it to EPCO part number 2-A-5 for straightforward specification and reordering. The track is 5 FT Long, giving enough continuous length for typical residential or light commercial bypass openings where a single, uninterrupted run is preferred. This assembly is described as For heavier 3/4" thick by-passing wood doors, aligning the hardware with applications where added door weight needs a purpose-designed track system for smoother operation over time. Being supplied under the EPCO brand within Sliding Door Hardware signals that it is built for door movement rather than general-purpose channel, which supports consistent sliding performance on bypassing installations.
The SAP description ALU TRK KIT NO.2 FOR 3/4IN DR,5FT L confirms that this is an aluminum track kit dedicated to 3/4 inch doors at a fixed 5 ft length, so layout and cutting steps are based on known dimensions rather than variable stock. The Web Description states Bottom track has machined, hardened fiber inserts, meaning the running surface is created by precisely formed inserts rather than unfinished aluminum, giving door glides a defined contact area for predictable movement. Four fiber glides (#1801) recess into bottom of door and glides easily on track describes how the door load transfers into the track, so installers can plan a bottom-guided system where the door edge sits on dedicated glide points instead of dragging on wood or floor surfaces during operation.
The Web Description states For heavier 3/4" thick by-passing wood doors, so this track is intended specifically for two or more wood doors that slide past one another on shared openings, letting builders design closets or similar access points around a known hardware set. Because the product name calls it a Sliding Door Track Assembly for 3/4" Door No. 2, installers can read No. 2 as part of the EPCO system family reference, matching this kit to documented layouts that call out number 2 tracks in drawings or schedules. The Category Builders Hardware|Sliding Door Hardware and Product Class Sliding Door Hardware together show that this part is engineered for moving door panels rather than generic framing, which keeps it aligned with the forces and wear patterns seen in sliding door projects. The 5 FT Long dimension means the track is well-suited to moderate spans, such as many wardrobe or mechanical access openings, where one continuous bottom guide reduces joints that could catch door glides. In practice, this combination of defined door thickness, bypassing function, and fixed length supports consistent results across similar openings on multi-unit jobs.
The Web Description notes Bottom track has machined, hardened fiber inserts, so rather than relying on bare aluminum, the sliding surface is defined by shaped fiber components that take the contact from the glides, which helps maintain a smoother feel along the full 5 FT Long run. It further states Four fiber glides (#1801) recess into bottom of door and glides easily on track, which means the glides sit into the door bottom rather than protruding off the face, helping maintain a clean door edge line while still providing the contact points that ride on the hardened fiber inserts. Because these glides are identified by the specific reference (#1801), specifiers can call out the exact glide type that corresponds to this track, aligning job documents and purchase orders with a clearly matched track-and-glide pairing. The Brand EPCO ties these components together under one manufacturer, which matters when shops want coordinated sliding behavior across multiple openings using the same track profile, glide type, and door thickness assumptions.
The Sliding Door Track Assembly for 3/4" Door No. 2 is described as For heavier 3/4" thick by-passing wood doors, so it is intended specifically for use with 3/4 inch thick wood door panels.
The SAP and Web Description both specify the track as 5 FT Long, so layout and cuts are based around a 5 foot aluminum bottom track section on each use.
The Web Description explains that Four fiber glides (#1801) recess into bottom of door and glides easily on track, so the door weight is carried on those recessed fiber glides.
The Web Description states Bottom track has machined, hardened fiber inserts, so the sliding contact surface is formed by those hardened fiber inserts rather than unfinished aluminum alone.
The Product Data lists the Brand as EPCO, so this sliding door track assembly and its related components come from EPCO within the Sliding Door Hardware class.
The product is named Sliding Door Track Assembly for 3/4" Door No. 2, 5FT L and carries Manufacturer Part # 2-A-5, giving designers and buyers precise references for documentation and sourcing.
The Sliding Door Track Assembly for 3/4" Door No. 2, 5FT L Clear Anodized is presented as an EPCO solution For heavier 3/4" thick by-passing wood doors, aligning directly with common cabinet and closet door builds that rely on bypass movement. With an aluminum bottom track described as 5 FT Long and equipped with machined, hardened fiber inserts, along with Four fiber glides (#1801) that recess into the door bottom and glide easily on track, the system defines how the door should interface with the hardware from the start. For projects needing a clearly defined 3/4 inch door, bypassing layout, and 5 foot bottom guidance under the EPCO brand, this track assembly is suited to be that specified sliding door hardware choice.
Sold In: 1 Each
