Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4 x 72 guide track assembly describes a sliding door hardware set built for heavier 3/4 inch thick bypassing wood doors, so it supports typical cabinet or closet-style panels where two doors slide past each other. The EPCO aluminum track is 6 feet long, giving room to span wider openings in one continuous run. Its clear anodized finish treats the aluminum surface, which helps it resist wear in regular sliding use. The bottom track uses machined, hardened fiber inserts, creating a defined running surface that guides the matching glides. Those hardened inserts provide a more consistent sliding path over time, which matters when doors cycle frequently in a shop or residential setting. Four fiber glides, EPCO part number 1801, recess into the bottom edge of each wood door and ride directly on the track, so the door weight transfers onto a matched track-and-glide system.
This EPCO sliding door hardware uses a bottom track layout for heavier 3/4 inch thick bypassing wood doors, so the primary support comes from beneath the panels rather than from an overhead rail. The 3/4 inch dimension targets doors with that specific thickness, aligning the fiber glides to sit properly within the lower edge. The track measures 72 inches in length, allowing it to be positioned along the base of an opening that matches this span. The machined, hardened fiber inserts in the aluminum track are shaped to accept the four 1801 fiber glides, so the moving interface is fiber-on-fiber along the run. Because the glides recess into the bottom of the door, the sliding contact point remains protected within the thickness of the wood, helping the door travel along the defined path of the track.
This EPCO 3/4 inch by 72 inch guide and track assembly is intended for heavier 3/4 inch thick bypassing wood doors, placing it in cabinet, closet, and similar sliding panel applications where two doors share one opening. The 6 foot aluminum bottom track spans wider casework or built-in runs, which is useful when the opening extends beyond typical cabinet widths. Because this is sliding door hardware in the builders hardware class, it fits into woodworking projects where a bottom-supported door arrangement is preferred. The clear anodized finish lets the track sit at the base of finished woodwork without drawing excessive attention, which helps maintain the visual flow of the doors and face frame. The use of four 1801 fiber glides ties the doors directly into the system, so each door edge engages the same track profile along its full travel.
The bottom track on this EPCO assembly has machined, hardened fiber inserts, giving the 1801 fiber glides a consistent running surface that supports repeatable sliding over time. That fiber-on-fiber contact helps define the door path and reduces harsh metal contact at the running interface. Because four fiber glides recess into the bottom of the door, the load transfers through those glides directly to the fiber inserts, which helps distribute weight along the length of the track as the door moves. This arrangement is particularly important with heavier 3/4 inch thick doors, where concentrated loading can affect how the panels move if not properly supported. The 6 foot track length keeps this sliding relationship unbroken across the entire opening, which supports smooth motion from end to end when the doors are moved frequently in everyday use.
This EPCO guide and track assembly is designed for heavier 3/4 inch thick bypassing wood doors, so it aligns the 1801 fiber glides with doors built to that thickness.
The guide and track assembly uses a 72 inch, or 6 foot, aluminum bottom track, so it spans wider cabinet or closet-style openings in one continuous length.
The bottom track has machined, hardened fiber inserts that form the running surface, giving the 1801 fiber glides a defined path to follow for consistent sliding motion.
Four fiber glides, identified as number 1801, recess into the bottom of the door, so the sliding contact point stays within the door edge and rides directly on the track inserts.
This sliding door hardware is described for heavier 3/4 inch thick bypassing wood doors, meaning it is used where two doors slide past each other in a shared opening.
The 3/4 inch by 72 inch aluminum track has a clear anodized finish, providing a treated surface that coordinates with many wood finishes in visible installations.
The EPCO 3/4 inch by 72 inch guide and track assembly provides a 6 foot aluminum bottom track with machined, hardened fiber inserts matched to four 1801 fiber glides. For heavier 3/4 inch thick bypassing wood doors, that combination creates a defined sliding interface from one end of the opening to the other. When a project calls for sliding door hardware in the builders hardware class, this assembly delivers a clear anodized track and recessed fiber glides that work together as a dedicated system for bottom-supported movement.
Sold In: 1 Each
