closed flange for 1-1/4 and 1-5/16 tubing describes this EPCO part as a dedicated support for standard closet rod sizes, so installers can use one flange style across common 1-1/4 inch and 1-5/16 inch tubing runs without changing hardware between jobs. The aluminum construction ties a light-weight material to the load point, which streamlines handling during layout while still giving a defined seat for the rod ends. A 30mm length body creates a compact housing for the tubing, so rods terminate cleanly against the wall while conserving depth in tight closet or cabinet spaces. The oil rubbed bronze finish sets the flange up to visually coordinate with oil rubbed bronze projects, allowing rods and flanges to read as a single, consistent trim element. As a closed flange, it captures the rod end in a cup-style form, which helps keep cut ends concealed at the wall.
The flange design that screws on to a back plate and mounts invisibly pairs a two-part arrangement with concealed fasteners, allowing the structural plate to anchor to the surface while the visible flange covers the fastening points. This setup keeps screw heads away from the interior of the cup where the tubing seats, creating a smooth bearing surface for the rod end and a cleaner look at eye level. Because the back plate takes the screw load while the front portion finishes the opening, installers can position the plate for strength and then rotate the flange body for final alignment. In closet or cabinet interiors where the hardware remains visible, the invisible mounting style helps the oil rubbed bronze face read as finished trim rather than exposed hardware.
This EPCO closed flange for 1-1/4 inch and 1-5/16 inch tubing works in closet rod, wardrobe, and similar hanging-rod layouts that use those tubing sizes, since the cup is dimensioned to accept both diameters without changing parts. As part of the Closet Rods and Flanges product class, it is intended to sit at rod ends, tying the rod to side walls or partitions where a closed-style seat is preferred instead of a pass-through bracket. The oil rubbed bronze finish lets it sit logically in oil rubbed bronze closet tubing and flange projects, so the visible face at each rod termination matches rods specified with the same finish description. Within shelf, closet, and garage organization applications, this flange supports hanging storage where rods mount between vertical panels or walls.
The flange that screws on to a back plate and mounts invisibly separates structural fastening from the finished face, which helps installers stage the back plate exactly where it needs to bear load before threading the flange body into place. By hiding the fasteners behind the oil rubbed bronze face, the assembly provides a clean, uninterrupted contact point for the tube, which reduces chances of rod ends catching on screw heads as clothing is moved along the rod. The 30mm length defines a fixed engagement depth for the tubing, so once that depth is known, cut lengths can be repeated from opening to opening and still land flush against the back of the cup. Because the same flange accepts both 1-1/4 inch and 1-5/16 inch tubing, installers can carry a single part number, EPCO 857-ORB, for common rod diameters and maintain consistent appearance while swapping or extending rods.
The Epco 857-ORB closed flange is designed for 1-1/4 inch and 1-5/16 inch tubing, so it can support both common closet rod diameters in one flange design on similar projects.
The closed flange screws on to a back plate and mounts invisibly, so the fasteners stay behind the visible face, leaving a clean oil rubbed bronze ring around the rod end.
The 30mm length defines how deeply the tubing sits inside the flange, helping installers calculate rod cut lengths and achieve consistent end gaps at closet or cabinet walls.
The aluminum closed flange keeps weight down while providing a formed cup for the rod end, which aids handling overhead and gives the tubing a defined, protected seat.
The oil rubbed bronze finish lets the flange visually coordinate with oil rubbed bronze closet tubing and trim, so rod ends and supports read as a unified bronze set.
The closed flange for 1-1/4 inch and 1-5/16 inch tubing serves as an end support, capturing the rod cut end in a cup so the termination at walls or panels stays covered.
The EPCO 857-ORB closed flange for 1-1/4 inch and 1-5/16 inch tubing ties a single part to two standard rod diameters, which helps standardize hardware across varied closet layouts. Its aluminum body, 30mm length, and oil rubbed bronze finish combine into a compact, finished support that matches oil rubbed bronze rods while controlling rod engagement depth. For closet, wardrobe, or similar hanging-rod work handled through Wurth Baer Supply, this closed flange gives installers a straightforward way to terminate rods cleanly at side walls or partitions.
Sold In: 1 Each