Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
closed flange for 1-1/4 and 1-5/16 tubing is designed as a closet rod support that matches common closet tubing sizes, so installers can tie into standard 1-1/4 inch and 1-5/16 inch rods without workarounds. The EPCO branding identifies it as an Epco 857-SN component, which helps match it with other parts in the same system when planning closet or storage layouts. Being part of the Closet Rods & Flanges product class means it is intended to serve as a structural end support in closet and similar hanging applications, turning open wall or cabinet space into usable hanging storage. The closed flange design supports the tubing by surrounding it at the end, which helps position the rod positively during installation and use in typical closet rod layouts where alignment matters.
The web description explains that this closed flange screws on to a back plate and mounts invisibly, so the fastening points are concealed once assembled and the visible face stays clean when the closet is in use. That invisible mounting style means fasteners sit behind the flange, which keeps the finished closet interior looking continuous while still giving a fixed mechanical connection to the wall or cabinet panel. The statement that it is for 1-1/4 inch and 1-5/16 inch tubing defines the working range of tubing sizes, so once the rod is cut to length, it can be set into the flange without additional bushings for those diameters. Positioning the aluminum flange at the rod end lets the tubing seat into a defined pocket, which helps keep the rod from wandering at the support point during repeated loading in everyday hanging applications.
The category description placing this item under Shelf, Closet & Garage Organization and Closet Tubing & Flanges shows that the closed flange is intended for closet and storage runs where hanging space is needed. Because the flange is sized for 1-1/4 inch and 1-5/16 inch tubing, it works with closet rods in those diameters in typical wardrobe, linen, or storage cabinet layouts that use similar tubing. The aluminum body mentioned in the web description gives the flange a metal construction that pairs naturally with metal closet rods in matching diameters across those installations. The satin nickel reference in the product name means the visible surface presents a satin nickel appearance, so it can line up visually with satin nickel rods in reach-in or walk-in closet configurations that rely on appearance as well as function.
The web description notes that the closed flange screws on to a back plate and mounts invisibly, so installers can fasten the back plate, assemble the flange over it, and end up with a concealed fastening pattern that repeats from closet to closet. Because the screws operate through the back plate before the flange is set, the mounting points stay hidden once the flange is in its working position, giving a consistent satin nickel face whenever the door or closet area is open. The 30mm length dimension in the product name defines the flange length, so installers can predict how far the flange projects from the mounting surface and plan rod clearances against side panels accordingly. By being part of the Closet Rods & Flanges product class and fitting 1-1/4 inch and 1-5/16 inch tubing, this Epco 857-SN flange provides a known interface that supports repeatable rod installations using those standard tubing sizes.
The Epco 857-SN closed flange fits 1-1/4 inch and 1-5/16 inch tubing, so it matches common closet rod diameters used in many hanging storage layouts.
The closed flange screws on to a back plate and mounts invisibly, so the fasteners sit behind the visible face, leaving a clean satin nickel appearance after installation.
The web description notes an aluminum body and the name specifies satin nickel, giving an aluminum flange with a satin nickel appearance for closet or storage use.
As a Closet Rods & Flanges component, this closed flange is used at rod ends where 1-1/4 inch or 1-5/16 inch tubing meets a wall or panel.
The 30mm length listed in the product name indicates how far the flange extends from the mounting surface, which helps plan rod position relative to side panels.
The 857-SN manufacturer part number identifies this specific Epco closed flange, which aligns with drawings or material lists that call out the same code.
This Epco 857-SN closed flange from Wurth Baer Supply is sized for 1-1/4 inch and 1-5/16 inch closet tubing, so it matches standard rods in many storage layouts. The aluminum satin nickel design with invisible mounting supports clean, consistent closet installations. Using a flange that is part of the Closet Rods & Flanges class and marked with the 857-SN part number helps align field work with specified closet hardware when setting up or expanding hanging storage.
Sold In: 1 Each