Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Closed flange for 1-1/4 and 1-5/16 tubing gives you a defined mounting point for closet rods sized to those diameters, so rods seat correctly and carry load along the flange face. The Epco 857-PC identity ties this flange directly to EPCO documentation, which helps align it with existing closet tubing layouts that call out that part number. The flange design is closed, so the rod end is captured inside the flange body, which helps keep the rod from shifting sideways during use. The polished chrome finish presents a bright, clean surface on exposed ends, which suits open closet interiors where the rod termination is visible. The flange body is aluminum, so you get a rigid, lightweight part that resists everyday indoor humidity conditions typical of closet spaces. Its 30mm length gives the rod end a defined bearing depth inside the flange, which supports consistent end alignment from bay to bay.
This closed flange for 1-1/4 and 1-5/16 tubing ties rod alignment directly to a fixed aluminum body, so the rod end seats in a consistent position along the closet wall. The flange screws on to a back plate, which separates plate mounting from final flange positioning, so you can fasten the plate first and then orient the polished chrome face to match the rest of the hardware line. Because the fasteners sit behind the flange on the back plate interface, the visible surface remains clean, which helps when rods sit at eye level in open closets. The 30mm length defines how far the rod enters the flange, which supports cutting rods to the same dimension across multiple openings without recalculating engagement depth each time.
The closed flange for 1-1/4 and 1-5/16 tubing fits closet projects built around those round rod diameters, so it works on standard bedroom, hallway, or storage closets using matching tubing. Its aluminum construction suits typical indoor closet environments, where the material stays stable under normal temperature and humidity. The polished chrome finish lines up with polished chrome rods and other bright closet components, so you can keep the visible hardware consistent from end flanges to center supports. With a 30mm length, the flange provides a defined pocket that supports the rod end, which is useful when closet side walls carry most of the span support. Because the flange is closed, the rod end is captured inside the flange instead of resting on an open saddle, which can help maintain alignment at the wall over repeated loading cycles.
The flange screws on to a back plate, giving you a two-step mounting sequence that separates structural fastening from finish alignment. Fastening the back plate first allows you to line up screw positioning on both walls of an opening before threading on the polished chrome flange, which can simplify layout when you are matching existing hole patterns. Once the flange is screwed onto the back plate, the connection hides the plate and fasteners behind the aluminum body, leaving only the finished flange surface exposed to the room. The specified 1-1/4 and 1-5/16 tubing fit means cut rods that match those diameters will register directly inside the flange pocket, which supports straight runs where both ends seat at the same depth. The 30mm length controls the insertion distance, which lets you work from consistent cut dimensions when you are repeating the same opening width across a bank of closets.
The Epco 857-PC closed flange is for 1-1/4 and 1-5/16 tubing, so it matches common closet rod diameters and lets those rods seat properly inside the flange pocket.
This closed flange screws on to a back plate, so the plate mounts to the surface first and the visible aluminum flange threads on afterward to finish the installation.
The closed flange design captures the rod end inside the aluminum body, helping control side-to-side movement at the wall and keeping the rod termination visually finished.
This EPCO closed flange has a 30mm length, setting a fixed insertion depth that supports consistent rod cutting and repeatable engagement at both ends of a closet opening.
The 857-PC flange is aluminum with a polished chrome finish, giving a rigid body with a bright surface that coordinates with polished chrome closet tubing.
The closed flange for 1-1/4 and 1-5/16 tubing sits at closet rod terminations, providing a mounting point on side walls or panels for rods matching those diameters.
The closed flange for 1-1/4 and 1-5/16 tubing ties directly to Epco 857-PC, so it lines up with closet layouts specified around that part number and those rod diameters. Its aluminum body, 30mm length, and polished chrome finish work together to position and visually finish the rod end at the wall. When a closet run calls for 1-1/4 or 1-5/16 tubing with a clean termination, this EPCO flange from Wurth Baer Supply gives you a defined rod pocket and an invisible back plate connection for a straightforward, trade-ready solution.
Sold In: 1 Each