Sugatsune Olympia Mounting Plate Standard, 32mm Boring Pattern, - 360-P4W-32T

Sugatsune Olympia Mounting Plate For Hinges

Sugatsune Olympia mounting plate gives a dedicated base for Olympia hinges, so the hinge has a stable connection point between cabinet and door. This steel screw-on mounting plate supports proper hinge function, which matters when you want doors that open and close consistently.

The plate is part of the Sugatsune America Olympia system, so it is intended to work with Olympia hinges in that family. Using the matching mounting plate keeps the hinge geometry as designed, which helps maintain alignment between hinges on multi-hinge doors.

This mounting plate is classified as a standard plate within the Olympia line, so it targets everyday cabinet hinge layouts. That standard status helps simplify selection when you want a straightforward plate that matches common Olympia hinge setups.

The part is identified as 360-P4W-32T, which ties directly to the Olympia mounting plate specification. Having that exact manufacturer part number helps align purchasing, installation planning, and future replacement to the same plate.

Key Olympia Mounting Plate Details That Matter

• The plate is made from steel, which provides a rigid base under the hinge arm, helping the hinge carry door loads without excessive flex.
• It uses a screw-on mounting method, so the plate fastens to the cabinet with screws, giving a secure mechanical connection for repeated door use.
• The design is a standard mounting plate within the Olympia lineup, supporting typical cabinet layouts where specialized plates are not required.
• The Olympia hinge focus means this plate is intended for Olympia hinges, aligning the mounting geometry to that hinge family for consistent function.
• The part is categorized as a hinge mounting plate, so its primary role is to connect the hinge to the cabinet structure in the hinge system.

Screw-On Mounting And Boring Pattern Setup

This Sugatsune screw-on mounting plate uses a 32 mm boring pattern, so the screw holes are spaced on 32 mm centers. That spacing fits cabinet layouts built around 32 mm system drilling, which many shops rely on for repeatable, jig-based work.

The screw-on style means the plate is secured using screws through the plate into the cabinet. That method supports positive clamping between the plate and the cabinet panel, which is valuable where doors see frequent opening cycles.

The plate also offers height adjustment of plus or minus 2.5 mm relative to its mounting position. That adjustment allows fine tuning of the hinge position on the cabinet, which helps bring doors into line when gaps vary slightly.

Because the boring pattern and adjustment range are defined, installers can plan drilling patterns and adjustment moves in advance, improving workflow on multi-door runs.

Using The Olympia Hinge Mounting Plate In Work

Where This Sugatsune Mounting Plate Fits Best

This Sugatsune Olympia mounting plate is designed to be used with Olympia hinges, so its best use is on projects built around that hinge series. Matching the plate to Olympia hinges keeps the contact geometry consistent, which helps doors hang as the hinge manufacturer intended.

The standard plate configuration supports typical cabinet constructions where hinges mount to cabinet sides or similar structural members. In these situations, the steel body of the plate provides a firm bearing surface under the hinge, which matters when doors carry varying loads over time.

The 32 mm boring pattern matches layouts that follow the 32 mm cabinet system. In production or shop settings using line boring or drilling jigs, this alignment allows the plate to sit directly into predrilled rows, which speeds layout and reduces measuring steps.

When matched with Olympia hinges on cabinets following a 32 mm pattern, the mounting plate helps tie together the drilling scheme, hinge position, and door behavior into a predictable setup across multiple openings.

Adjustment And Layout Details For Repeatable Results

The height adjustment of plus or minus 2.5 mm built into this mounting plate gives a small but important vertical range. That adjustment is applied at the plate-to-hinge interface, so installers can shift the door position relative to the cabinet without relocating the plate.

This adjustment range matters on installations where cabinet boxes or doors vary slightly from nominal dimensions. By working within the plus or minus 2.5 mm window, hinges on a run of doors can be aligned so reveals look consistent across adjacent fronts.

Because the mounting plate is screw-on with a 32 mm boring pattern, the primary drilling never changes once the holes are placed. The fine-tuning then happens at the plate level using the height adjustment, which is efficient when aligning several hinges on a tall door.

Using the defined boring pattern and adjustment together means installers can approach jobs in two stages: first, drill and mount plates on the 32 mm centers; second, use the plus or minus 2.5 mm height adjustment to bring each door into its final alignment.

Common Questions About This Olympia Mounting Plate

Select This Mounting Plate For Olympia Hinge Jobs

The Sugatsune Olympia mounting plate standard, 32 mm boring pattern, centers on practical hinge mounting for Olympia hinges. The steel screw-on design with plus or minus 2.5 mm height adjustment offers a defined way to set and fine tune hinge position on 32 mm-based cabinets.

For projects built around the Olympia hinge system, choosing this 360-P4W-32T hinge mounting plate aligns the drilling layout, plate placement, and hinge adjustment into a coordinated setup aimed at consistent, repeatable cabinet door results.