Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympia mounting plate gives you a dedicated hinge mounting plate designed to be used with Olympia hinges, so hinge and plate work as a matched system on your cabinet run. The plate is part of Sugatsune Americas Olympia hinge hardware family, which keeps components consistent when you stay within the line. As a hinge mounting plate, it bridges the hinge to the cabinet, setting the reference height that affects how doors sit against the case. Being a hinge mounting plate in the Hinge Mounting Plates class also means it is purpose-built only for this role in your hinge layout, which supports repeatable layouts from cabinet to cabinet. The Sugatsune Olympia mounting plate identity and the specific 360-P6WT part number give you a clear way to reorder or match drawings and cut lists on future jobs.
The Sugatsune Olympia mounting plate uses a screw-on attachment method, so you fasten the steel plate to the cabinet with screws through its four screw holes into predrilled positions. This screw-on design works hand in hand with the 32 mm boring pattern, because once the 32 mm row is drilled the plate location is defined by that pattern and the screw holes in the plate. The plate offers a height adjustment of plus or minus 2.5 mm, so after initial installation you can shift the hinge position up or down within that range. That height adjustment directly affects door reveal and alignment relative to the cabinet, which lets you fine-tune gaps along the case for a clean finished look.
The Olympia hinge mounting plate sits between the cabinet structure and the Olympia hinge, so it is central to how the hinge functions on the door. Because it is designed to be used with Olympia hinges, the geometry of the Sugatsune plate and the hinge body are coordinated, which supports predictable overlay and swing behavior when you follow your cabinet plan. In a cabinet built on a 32 mm boring system, the 32 mm boring pattern of this plate gives you a natural fit into predrilled rows, so the hinge positions follow the same grid that guides your shelf pins and other system hardware. The hinge mounting plate classification means it is dedicated to that hinge interface role, which simplifies hardware selection when you are standardizing across a shop or project.
The steel Olympia hinge base plate provides a consistent, rigid mounting surface for each Olympia hinge, which helps multiple doors on a bank behave the same way under everyday use. The screw-on mounting plate approach lets installers lock the plate to the cabinet at the 32 mm boring pattern, so each plate references the same system holes and reduces variation from cabinet to cabinet. With a height adjustment of plus or minus 2.5 mm, the 360-P6WT mounting plate offers fine-tuning capability after the cabinet is assembled, so installers can dial in vertical door positioning without changing drilling locations. That combination of system-based 32 mm boring and post-mount height adjustment reduces rework, because most alignment changes can be handled by using the plates built-in adjustment range. Using the standard mounting plate from Sugatsune Americas Olympia line also helps maintain a single specification for similar hinge points, which simplifies drawings and part lists on repeated cabinet runs.
The Olympia 360-P6WT plate is a Sugatsune steel hinge mounting plate from the Olympia line, so it serves as the interface between Olympia hinges and the cabinet.
The Sugatsune Olympia mounting plate is designed to be used with Olympia hinges, so its geometry supports the intended hinge-to-plate connection.
The 32 mm boring pattern matches system drilling layouts, so the mounting plate aligns to predrilled 32 mm rows and keeps hinge positions consistent on cabinets.
The Olympia hinge mounting plate provides a height adjustment of plus or minus 2.5 mm, so vertical door position can be fine-tuned after the plate is fastened.
The screw-on mounting plate design uses screws through its four holes into the cabinet, so installers directly secure each plate at the drilled locations.
The steel construction of the Sugatsune Olympia plate creates a sturdy metal base for the hinge, so the door connection feels solid during normal cabinet use.
The Sugatsune Olympia mounting plate standard design ties directly into Olympia hinges, so it supports a unified hinge solution across a cabinet project. With its 32 mm boring pattern and screw-on mounting style, the plate integrates into system-drilled casework where hinge rows follow the same spacing as other hardware lines. The steel hinge mounting plate construction and four screw holes work together to hold the hinge firmly in place on the cabinet surface. When you need controlled reveals, the built-in height adjustment of plus or minus 2.5 mm gives a practical way to fine-tune door alignment using the plate already in your layout.
Sold In: 1 Each