Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Sugatsune Olympia mounting plate gives you the dedicated base plate for Olympia hinges so the hinge arm has a secure, repeatable mounting point on the cabinet. The plate is part of Sugatsune Americas Olympia hinge system, so hinge and plate geometry are matched for predictable door alignment on your jobs. This plate is identified as standard in the Olympia line, which keeps it suited to everyday cabinet and casework layouts where a conventional hinge mounting solution is needed. Because it is a hinge mounting plate, it serves as the interface between the cabinet side and the Olympia hinge, so positioning and adjustment happen at the plate rather than at the door.
The mounting plate is described as +5mm type, so it provides a higher mounting reference that affects where the door sits relative to the cabinet side. That +5mm classification lets you choose this plate when you need the Olympia system to place the door further from the mounting surface in line with the hinge design.
The Sugatsune Olympia steel +5mm screw-on mounting plate attaches using a screw-on method, so the installer positions the plate on the cabinet and fastens it with appropriate screws for the application. Because the plate uses a 32 mm boring pattern, it aligns directly with holes drilled on a 32 mm system line, which helps keep hinge locations square and repeatable down a run of cabinets. The height adjustment of plus or minus 2.5 mm lets you shift the mounted hinge and door up or down on the cabinet side while the plate remains fixed to the 32 mm line, so the final door gaps can be dialed in without relocating the plate. As a hinge mounting plate within the Olympia family, it supports straightforward mounting where the hinge arm locks to the plate at the designed height.
The Sugatsune Olympia mounting plate standard, 32mm boring pattern, +5mm type, fits into cabinet builds that follow a 32 mm boring pattern on the case interior. In that layout, the plate sits on the 32 mm system line and positions the Olympia hinge at the planned height and setback. Because the mounting plate is designed to be used with Olympia hinges, it functions as the dedicated base for those hinges in frameless or system-based cabinet carcasses. The +5mm type designation means the plate sets the hinge interface at a higher level relative to the cabinet surface than a zero reference plate would, so the Olympia hinge uses that offset to place the door in its intended relationship to the cabinet side. As part of the hinge mounting plates class, this component acts as the fixed reference part, while the hinge arm connects and moves relative to the plate.
The steel construction of the Sugatsune Olympia steel +5mm screw-on mounting plate gives the hinge a solid attachment surface that resists deformation under normal door loads, so the hinge action works off a stable base. In multi-door runs, the shared 32 mm boring pattern across all plates supports consistent hinge positioning from cabinet to cabinet when holes are drilled to the same line. The plate works with the Olympia hinge to coordinate overlay and reveal based on the +5mm type geometry, so selecting this model lets the installer follow the Olympia system parameters across the project. By relying on a standard Olympia mounting plate, replacement or additional doors using Olympia hinges can engage the same plate style and preserve alignment behavior.
The 32 mm boring pattern on this screw-on mounting plate ties it directly to common system drilling in cabinet shops, so once the line of holes is established, installing each plate stays quick and consistent. That pattern also means hinge locations can be repeated precisely at regular vertical intervals on tall cabinets, keeping hinge spacing uniform with the Olympia hinge set. The height adjustment of plus or minus 2.5 mm on the plate gives you a controlled range to shift the hinge and door position without modifying the original 32 mm hole locations, so fine-tuning reveals or matching adjacent doors can be handled at the plate interface. As a +5mm type plate, its built-in raised height combines with the adjustable range to deliver a specific working envelope where the Olympia hinge can be aligned to the cabinet geometry.
Because the product is a Sugatsune Olympia mounting plate standard, 32mm boring pattern, +5mm type, its defined dimensions and adjustments are fixed by the manufacturer part 360-P4W-32TPLUS5, so doors hung on this plate behave consistently wherever that part is installed. Integrating this hinge mounting plate into the build helps define the cabinet hardware layout as part of a system, which supports repeatable installations when the same Sugatsune Olympia hinge family is used across multiple projects. The identification of this component as a hinge mounting plate within the hinge base plates category also clarifies its role: it remains anchored to the cabinet structure while the hinge arm engages and is adjusted relative to the plate for final alignment.
The Sugatsune Olympia mounting plate is designed to be used with Olympia hinges, so it serves as the matching base plate for that specific hinge family on cabinet installations.
The 32 mm boring pattern matches standard 32 mm system drilling, so the plate aligns to predrilled holes and keeps hinge locations consistent across cabinet runs built on that system.
The +5mm type designation indicates the mounting plate establishes a raised hinge interface height, which affects where the Olympia hinge positions the door relative to the cabinet side.
The Sugatsune Olympia steel +5mm screw-on mounting plate has a height adjustment of plus or minus 2.5 mm, so the door position can be shifted slightly up or down after mounting.
The product is described as a Sugatsune Olympia steel +5mm screw-on mounting plate, so its steel construction provides a firm base for the Olympia hinge on the cabinet.
The manufacturer part number is 360-P4W-32TPLUS5, which identifies this specific standard Olympia hinge mounting plate with 32 mm boring pattern and +5mm type.
The Sugatsune Olympia mounting plate standard, 32mm boring pattern, +5mm type, gives you a defined base for Olympia hinges that follows system drilling and offers plus or minus 2.5 mm height adjustment. For cabinet runs built on a 32 mm line, this steel screw-on mounting plate from Sugatsune America supports consistent hinge placement tied to manufacturer part 360-P4W-32TPLUS5. Selecting this hinge mounting plate lets your Olympia hinge installations follow the intended +5mm geometry, so future doors using the same components respond predictably across projects.
Sold In: 1 Each
