Upper Tracks for Sliding Pocket Door System 49.60" (1260 mm) Length

Sliding Pocket Door Upper Track For Sugatsune Systems

sliding pocket door upper track describes this Upper Tracks for Sliding Pocket Door System 49.60 inch (1260 mm) Length component and highlights its job in a sliding installation. The track is designed for Sugatsune's Sliding Pocket Door Systems, so it works as the guided path that controls how the door moves. As passage door hardware, it supports door movement rather than latching, which suits interior openings where a smooth slide is the priority. The 49.60 inch (1260 mm) length gives installers a defined span to plan framing and clearances around, which helps with layout on standard interior openings. Sugatsune America branding ties this track to a known sliding pocket door program, so installers can align it with matching system parts. The manufacturer part number FD80-TRP1260-SL identifies this exact upper track within that system, helping shops and field crews repeat the same configuration across multiple openings.

Key Upper Track Details For Door Projects

• The Upper Tracks for Sliding Pocket Door System 49.60 inch (1260 mm) Length description identifies this piece as the top running surface, guiding the pocket door so the leaf travels along a defined line, which matters for consistent reveals and reduced side rubbing.
• The 49.60 inch length gives a fixed dimension to design around, allowing installers to coordinate header framing and pocket depth to the track span, which simplifies layout on repeated door openings.
• The 1260 mm measurement supports metric-based planning, which helps shops and installers working from millimeter drawings keep door clearances and pocket space aligned to design documents without extra conversion steps.
• Sugatsune America branding ties this track to Sugatsune's Sliding Pocket Door Systems, so it can be matched to that specific program, supporting system-based hardware planning on larger projects.
• The passage door hardware classification shows that this track is intended for sliding movement in interior passage applications, guiding installers and designers toward non-locking door uses such as room dividers or closet openings.

Upper Track Length And System Fit Details

The 49.60 inch (1260 mm) Length definition sets the working span for this sliding pocket door upper track, so wall construction and pocket framing can be laid out to that number. Because it is designed for Sugatsune's Sliding Pocket Door Systems, the track serves as the overhead guide that carries the system's sliding motion. Within passage door hardware, this dimensioned track helps align the sliding path to the finished opening size, which supports predictable door travel. The FD80-TRP1260-SL designation lets installers call out the exact length and system-specific part when ordering or documenting a job, aiding consistent fit when the same track is used across several doors on a project.

Using This FD80-TRP1260-SL Track In Door Work

Where This Sliding Pocket Door Track Is Applied

This Upper Tracks for Sliding Pocket Door System 49.60 inch (1260 mm) Length part is positioned as the overhead guide in a pocket door assembly, because it is designed for Sugatsune's Sliding Pocket Door Systems. As passage door hardware, it suits interior openings where a door needs to slide fully or partially out of the way rather than swing, such as room transitions or closet areas. The 49.60 inch (1260 mm) length supports applications sized around that span, helping designers select an opening width that aligns with the track they intend to use. In woodworking and construction settings, tying this track to the Sugatsune sliding pocket door program lets shops standardize their sliding details around one system, which can simplify both shop drawings and on-site setup when repeating similar openings.

Why The Track Size And Identity Matter

The precise 49.60 inch (1260 mm) Length specification on this sliding pocket door upper track gives installers a known run for the sliding motion, which helps plan stud placement, header length, and pocket depth around the track rather than adjusting on site. Because the track is designed for Sugatsune's Sliding Pocket Door Systems, it is intended to work as part of that coordinated hardware group, so using the FD80-TRP1260-SL part number ties the project back to a defined system. The passage door hardware classification indicates a focus on smooth movement through an opening, shaping how the door panel and surrounding trim are detailed. For repeat work, the combination of a fixed 1260 mm length and a specific manufacturer part number allows shops to specify the same track on multiple drawings and orders, which supports consistent sliding performance and reduces variation between openings.

Common Questions About This Sliding Door Track

Selecting This Track For Sliding Pocket Doors

This Upper Tracks for Sliding Pocket Door System 49.60 inch (1260 mm) Length component provides a defined sliding span and is designed for Sugatsune's Sliding Pocket Door Systems, aligning the track with matching hardware. For projects built around these systems, using the FD80-TRP1260-SL part number connects drawings, purchasing, and installation to the same specific sliding pocket door upper track, supporting consistent performance across every similar interior passage opening.