Upper Tracks for Sliding Pocket Door System 85.03" (2160 mm) Length

Sliding Pocket Door Upper Track For FD80 Systems

sliding pocket door upper track describes this Sugatsune America component designed as the upper track for sliding pocket door systems. The track is part of Sugatsune's Sliding Pocket Door Systems, so it works within that engineered assembly to guide the door at the head. The manufacturer part number FD80-TRP2160-SL identifies it as a specific track in the FD80 range, giving installers a precise reference when matching to existing layouts or drawings. The stated length of 85.03 inches, or 2160 mm, defines how much door travel and opening width the track can support in a straight run. This component falls under passage door hardware, so it is intended for interior openings where a sliding pocket door is used in place of a hinged door to move the door slab smoothly along the opening.

Key Track Details For Pocket Door Projects

• The 85.03 inch (2160 mm) length means one continuous upper run for many standard pocket door spans, which helps installers set out the header and pocket cavity using a known, fixed track dimension.
• Being designed for Sugatsune's Sliding Pocket Door Systems ties this track to a coordinated hardware family, so door movement and alignment follow the performance of the matching Sugatsune system components.
• The FD80-TRP2160-SL part marking gives a clear code to reference on plans, orders, or replacements, reducing mix ups when multiple sliding door hardware lines are present on a job.
• Placement in the passage door hardware category identifies its role on interior doors, helping specifiers separate this track from cabinet or light-duty sliding components when selecting hardware for room openings.

Upper Track Layout And Installation Planning

The 2160 mm length gives a fixed starting point when planning the head detail for a sliding pocket door, letting installers coordinate framing, pocket depth, and soffit lines around a single-piece track. Because this track is part of Sugatsune's Sliding Pocket Door Systems, its geometry and running surface are matched to the corresponding system components, which supports consistent door motion when those parts are combined correctly. The FD80-TRP2160-SL identification ties to Sugatsune America documentation, so layout drawings and hardware schedules can specify this exact upper track length to align door travel with the intended clear opening for a passage door.

Using This Sugatsune Upper Track In Projects

Where This Sliding Pocket Door Upper Track Fits

This sliding pocket door upper track serves as the head track in Sugatsune's Sliding Pocket Door Systems, so it fits projects that rely on that system to move an interior passage door. The 85.03 inch, or 2160 mm, length supports door openings where a single continuous track span is preferred at the header, allowing the door to slide from fully stored in the pocket to fully open in the passage. Because the product is categorized under passage door hardware, it is suitable for interior doorways where a sliding pocket configuration is chosen to save swing clearance. The FD80-TRP2160-SL designation ties the track to Sugatsune's FD80 family, which helps designers and installers align this upper component with corresponding system parts when building a coordinated sliding pocket door assembly.

Why Track Length And System Match Matter

The defined 2160 mm track length matters because it directly affects how far the door can travel and how much clear opening can be achieved in a pocket door layout. Using a track designed specifically for Sugatsune's Sliding Pocket Door Systems means the running surface, profile, and interface are matched to the system, supporting smoother movement when used with the intended components. The FD80-TRP2160-SL part number also streamlines future work, because the exact track can be identified for additions or replacements without remeasuring the opening. Its classification as passage door hardware signals that this track is aimed at full-size door applications rather than small cabinet sliders, guiding specifiers toward an appropriate hardware class when planning door movement in halls, rooms, or similar interior spaces.

Common Questions About This FD80-TRP2160-SL Track

Select This Track For Sugatsune Pocket Door Runs

This sliding pocket door upper track from Sugatsune America provides a defined 2160 mm, or 85.03 inch, head length for sliding pocket door layouts. As the FD80-TRP2160-SL component in Sugatsune's Sliding Pocket Door Systems, it aligns with that hardware family for interior passage door openings. For projects based around a Sugatsune sliding pocket door system, this track offers a clearly specified upper guide that ties directly to drawings, door schedules, and system planning.