Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Adjustment Cross Mounting Plate identifies this Hettich America Corporation hinge mounting plate as a plate designed to give precise alignment under a hinge arm, which supports clean door reveals on cabinet runs using Sensys or Intermat hinges. The 0mm long cross mounting plate description shows that this plate does not add offset along the cabinet side, which helps keep drilling patterns predictable across multiple cabinets. The 1.5mm detail in the product name highlights the plate height reference, which influences the overlay relationship between the door and side panel when paired with the correct hinge arm. The nickel-plated finish on the plate provides a metal surface suited to typical cabinet interiors, which supports a consistent appearance around the hinge area. The half overlay doors note ties this plate directly to half overlay applications, which helps align the choice of plate with the intended door coverage on the cabinet side.
The web description stating direct height adjustment identifies that the plate allows a +2mm / -2mm vertical adjustment range, which supports fine tuning the door gap after the plate is fixed to the cabinet side. The Hettich Direct installation reference shows that the plate is designed for a Hettich-specific mounting method, which aligns the drilling and fastening with that system. The note about a hole line 37mm x 32mm defines the mounting hole pattern on the cabinet side, which anchors drilling operations to standard distances for repeatable casework. The installation description mentioning a locating pin and special screws for drilling diameter 5 x 7.5mm ties the plate to those drilled seats, which stabilizes the plate position relative to the edge and helps maintain hinge alignment along the cabinet height.
The category listing as Hinges and Hinge Base Plates places this adjustment cross mounting plate directly in cabinet hinge construction, which situates it between the cabinet side panel and the Sensys or Intermat hinge arm. The application note For Sensys and Intermat describes that the plate is tailored to those hinge lines, which helps align hinge cup drilling and plate position for a predictable swing path. The mention of half overlay doors connects the plate to doors that cover part of the side panel thickness, which influences face alignment when cabinets sit side by side. The statement from 15mm side panel thickness describes the minimum cabinet side thickness for this plate, which supports casework built with common board dimensions in furniture and kitchen work.
The direct height adjustment feature with an adjustment range + 2mm / - 2mm allows the door position to be moved up or down relative to the cabinet side, which helps close uniform reveals across stacked doors. The web description phrase 0mm long cross mounting plate means that the plate length does not shift the hinge position along the cabinet depth, which simplifies drilling based on the 37mm x 32mm hole line. The noted hole line 37mm x 32mm defines consistent center-to-center distances for drilling, which supports using line-boring equipment or jigs for fast, repeatable placement. The installation method Hettich Direct with locating pin and special screws for drilling diameter 5 x 7.5mm positions the plate using the pin and screws in those bores, which helps keep the plate seated accurately under load from the hinged door. The quality classification under EN 15570, Level 2 ties the plate to a tested hinge system level, which supports use in typical cabinet door cycles where documented performance levels are valued.
The adjustment cross mounting plate is described as For Sensys and Intermat, which positions it for use with hinge arms from those Hettich hinge families in cabinet work.
The direct height adjustment range of + 2mm / - 2mm lets the hinge mounting plate shift the door up or down, which helps align gaps across multiple cabinet doors.
The hinge mounting plate is specified for half overlay doors from 15mm side panel thickness, which aligns it with cabinet cases built from boards at or above that thickness.
The web description states a hole line 37mm x 32mm and drilling diameter 5 x 7.5mm for the locating pin and special screws, which shapes the drilling layout on the cabinet side.
The 0mm long cross mounting plate description indicates no additional offset along the cabinet side, which helps keep drilling positions consistent with the 37mm x 32mm hole system.
The quality classification under EN 15570, Level 2 links this plate to a hinge system tested to that level, which relates to performance expectations in typical cabinet use.
The SAP description SENSYS CROSS MPL 1.5MM DIREKT W/SCRWS and the web description 0mm long cross mounting plate with direct height adjustment summarize this part as a hinge mounting plate tailored to Sensys and Intermat hinge lines. The mention of half overlay doors from 15mm side panel thickness situates the plate in common cabinet constructions, which aligns well with standard furniture board thicknesses. The defined hole line 37mm x 32mm and the + 2mm / - 2mm adjustment range together shape drilling and final fitting, which supports repeatable, tidy door alignment on projects using these hinge systems.
Sold In: 1 Each