Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Veosys concealed hinge brings Silent System soft-close and a stainless steel build to half overlay doors on face-frame and frameless cabinets, with screw-on mounting and a 105 degree opening angle.
Half overlay is the geometry for two doors that meet on a shared center partition, where each door covers roughly half the partition rather than the full cabinet side. This hinge is built for that situation, and the screw-on mounting means it goes straight onto the face frame or frameless panel without needing pre-drilled system holes in the cabinet. The 35mm cup bores into the back of the door at a standard 45mm spacing, and the arm connects to a Hettich base plate on the cabinet, ordered separately.
Stainless steel makes this version the right call when the finish needs to hold up to moisture, frequent cleaning, or exposure that would wear a plated nickel hinge over time. Think utility rooms, outdoor kitchens with cabinet sections, or any high-traffic installation where finish durability is part of the spec.
The hinge body is stainless steel throughout, not a nickel-plated steel part. That distinction matters in environments where humidity cycles or cleaning agents are part of daily use. The Silent System damper is integrated into the hinge, so soft-close performance does not depend on an add-on adapter. Doors in the 14 to 22mm thickness range seat the 35mm cup cleanly; going below 14mm or above 22mm moves outside what this hinge is designed for.
This hinge suits cabinet shops, contractors, and custom builders who are already running Hettich Veosys or who want a half overlay soft-close hinge with a finish that outlasts standard plating. It works on both frameless boxes and face-frame cabinets. Pair it with Hettich base plates, which are not interchangeable with plates from other brands. If the project calls for full overlay or inset doors, this half-crank arm is not the configuration to use.
No. The hinge clips to a Hettich base plate that mounts to the cabinet, and the plate is sold separately. Use Hettich plates only; plates from other brands are not compatible with this arm.
Stainless steel holds up where moisture, humidity, or frequent cleaning would eventually break down a plated finish. For dry indoor installations, a nickel-finish version works fine. For kitchens near water, utility spaces, or anywhere the finish takes abuse, stainless is the more durable choice.
Yes. Screw-on means the plate fastens with wood screws directly to the cabinet surface, so it works on face-frame stiles and frameless side panels alike without requiring pre-drilled system holes.
Silent System is Hettich's integrated soft-close technology. It uses a built-in damper to slow the door over the last few degrees of travel so it does not slam shut. It is not the same as self-close, which uses a spring to pull the door shut without cushioning the impact.
Specify the Veosys stainless steel half overlay hinge when the installation demands a finish that resists the environment and a close that stays quiet for the long run.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  HT9289609 Mfr# 9289609 | Veosys Cross Mounting Plate, Screw-On, 2mm |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  HT9289598 Mfr# 9289598 | Veosys Cross Mounting Plate, Screw-On, 0mm | ||||
Sold in: 1 Each |  HT9289611 Mfr# 9289611 | Veosys Neutral Cover Cap Stainless Steel - 200 Each |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  HT9309494 Mfr# 9309494 | Hettich Veosys 105° Hinge Full Overlay Soft-Closing Screw-On 9309494 |