Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
TopLine Grant double track 7004 defines this Hettich America Corporation sliding door hardware component as a dedicated double-track rail for sliding door runs. The aluminum extruded construction forms a rigid, consistent profile that supports dependable sliding door motion over the full length. The 8 ft length creates a continuous track span suited to wider openings in cabinetry or built-ins where a single straight run is needed. The integrated fascia noted in the product name adds a formed face to the track, creating a finished front edge that can align with surrounding trim work. The sliding door hardware category placement confirms its role as a core mounting element in a sliding system, letting you plan layouts around a known track type. The Hettich America Corporation brand and 50543 manufacturer part number give a clear reference for matching this track to project drawings or reorder lists.
The aluminum extruded, pre-drilled holes description shows that fastening points are already formed in the TopLine Grant double track 7004, so installers work with predetermined hole locations instead of creating their own pattern. This factory pattern supports straight alignment along the supporting header or cabinet frame, because each fastener position follows the same spacing. The 8 ft length concentrates that pattern into a single, continuous rail, reducing joint transitions in typical cabinet or closet spans. The presence of fascia in the product name indicates that when the track is mounted, the visible face is part of the extruded form, helping the mounting line read as a designed element rather than exposed raw profile edges.
The TopLine Grant double track 7004 with fascia 8 ft is identified as sliding door hardware, positioning it for use wherever two door panels need guided linear movement along a straight opening. The 8 ft dimension supports wider spans often found in long cabinet runs or built-in wall units, so one continuous track can carry both panels without intermediate joints. Because the profile is aluminum extruded, the track offers a consistent shape from end to end, which is important when doors travel the full opening and rely on even running surfaces. The fascia designation tells you the front of the track is shaped as part of the extrusion, allowing the assembly to sit in visible locations such as open shelving fronts or room-dividing cabinets where the track face remains in view.
The aluminum extruded construction of this Hettich 50543 double track provides a rigid, repeatable profile that helps rollers seat properly in both channels, which supports smoother operation across the whole opening. Because the holes are pre-drilled, the installer follows a defined mounting pattern that helps maintain straightness and level across the full 8 ft, limiting irregularities that could affect door travel. The double track layout in a single extrusion keeps both running channels aligned relative to one another, which is useful when designing overlapping or bypassing door configurations that depend on parallel movement. Fascia integrated into the track body eliminates the need to add a separate face piece for visual coverage, saving a fabrication step when the front edge of the hardware remains exposed in finished millwork.
The TopLine Grant double track 7004 is a sliding door hardware track that provides two channels for door movement, giving a defined running surface for sliding door assemblies.
The Hettich America Corporation 50543 track is 8 ft long, allowing a continuous run across wider cabinet or opening spans without splicing standard sections.
This TopLine Grant fascia track is aluminum extruded, creating a consistent profile that supports reliable door travel along the full length of the track.
The pre-drilled holes in the aluminum extrusion provide fixed fastening points along the 8 ft length, helping installers maintain straight, even mounting across the supporting structure.
The fascia noted in the product name forms an integrated front face on the track, giving the sliding hardware a cleaner appearance in visible cabinet or wall applications.
The double track design provides two parallel channels in one extrusion, so two sliding door panels can operate on the same 8 ft run with aligned movement paths.
The TopLine Grant double track 7004 with fascia 8 ft offers an aluminum extruded profile, factory pre-drilled holes, and a built-in fascia face, forming a defined sliding door track solution. These details give a clear basis for choosing this Hettich America Corporation 50543 component wherever a double-channel, 8 ft sliding door hardware track matches the planned opening width and visible trim requirements.
Sold In: 1 Each