TopLine Grant double track 7004 with fascia 16 ft gives you a dedicated sliding door hardware track from Hettich America Corporation that supports a double-track layout, so you can plan overlapping or bypassing door runs within the TopLine Grant system. The track is aluminum extruded, which creates a consistent running surface along the full 16 ft length for smooth door travel over long openings. The aluminum extruded construction also keeps the profile stable while you are aligning hangers and guides along the span. This TopLine Grant double track sits within Hettich sliding door hardware, so it ties into a proven builders hardware range for cabinet and door projects. The fascia on this track helps you finish the installation with a cleaner front appearance while still relying on the same aluminum extruded structure for strength. The 16 ft length reduces splices across wide openings, which simplifies layout and alignment on site.
The aluminum extruded, pre-drilled holes on this TopLine Grant double track 7004 with fascia 16 ft give you predictable mounting points along the entire length, so you can fasten through a consistent pattern without measuring every location. The pre-drilled holes also help maintain a straight line during installation because each fastener point follows the factory alignment in the extrusion. With a 16 ft run, that consistent hole pattern reduces layout time on larger cabinet or door spans. The aluminum extruded track stays dimensionally uniform along the length, which helps your hanging hardware ride smoothly once installed. Working within Hettich sliding door hardware, this double track ties into a coordinated sliding system so you can match the track to the intended TopLine Grant door configuration.
This TopLine Grant double track 7004 with fascia 16 ft sits in the builders hardware and sliding door hardware class, so it is designed as the main running component for sliding door setups in woodworking and similar projects. As aluminum extruded sliding door hardware, it suits applications that need a long, straight track over cabinets or openings commonly handled by the woodworking trade. The double track format creates two aligned channels that let doors move on separate lines, so you can design front and rear door positions along the same header. Within sliding door hardware workflows, this Hettich America Corporation track forms the structural guide that other components reference for plumb and level movement. Using a 16 ft length from the TopLine Grant sliding door hardware range, you can handle wider spans without breaking the track run into multiple shorter sections.
The aluminum extruded construction of this TopLine Grant double track gives you a single, continuous profile that keeps the running surfaces consistent, which supports smoother sliding motion once rollers or hangers are engaged. Because the extrusion is uniform, measuring from the track to adjacent faces stays predictable along the full 16 ft, helping maintain reveals and clearances on multi-door runs. The pre-drilled holes in the aluminum extruded body translate into straightforward drilling alignment on site, since you can work from the built-in pattern rather than laying out each fastener position across 16 ft. The fascia that works with this double track lets you cover the working profile at the front, creating a neater finished line while still relying on the same structural aluminum section behind it. Operating as TopLine Grant sliding door hardware, the combined track and fascia help you deliver a visible front edge that matches the functional performance of the underlying extrusion, reducing rework on appearance-sensitive installations.
The TopLine Grant double track 7004 with fascia is 16 ft long, so it can span wide cabinet or doorway openings in a single run for smoother door travel.
The Hettich 50546 sliding door track is aluminum extruded, giving you a consistent profile that supports smooth sliding movement and predictable alignment along the full length.
The aluminum extruded, pre-drilled holes provide a factory-set fastening pattern, so you can mount the track using consistent spacing that helps keep the run straight.
The fascia on this TopLine Grant double track works with the aluminum extrusion to present a cleaner front line while the track provides the structural sliding surface.
This TopLine Grant double track 7004 with fascia 16 ft is classified as sliding door hardware and builders hardware, serving as the main running track for sliding doors.
Manufacturer part number 50546 identifies this specific Hettich America Corporation TopLine Grant double track 7004 with fascia 16 ft for straightforward ordering and replacement.
Choose the TopLine Grant double track 7004 with fascia 16 ft when you need an aluminum extruded, pre-drilled sliding door track from Hettich America Corporation that supports double-track layouts over longer openings. The 16 ft length, integrated fascia, and pre-drilled aluminum profile give you a defined running surface and fastening pattern for sliding door hardware projects. Using this Hettich sliding door track within the TopLine Grant system helps align your door design, hardware selection, and installation workflow around a single, clearly specified component.
Sold In: 1 Each