2" Wide x 34-1/2" High Square Rockwell Single Table Leg, Black Matte

Square Rockwell Single Table Leg For Work Surfaces

square Rockwell single table leg describes a 2 inch wide by 34-1/2 inch high, square-profile leg designed as a single support for tables and work surfaces. The 34-1/2 inch height positions the top at a typical work or desk height when paired with standard thickness tops, which helps create comfortable working or task areas. The leg is part of the Rockwell line from Peter Meier, Inc., so it follows a consistent design for use across matching projects. Its square form factor gives a straight, clean edge reference for aligning with cabinet ends or table aprons. The product is classified under work surface and tables as a table leg, which supports use in custom benches, utility tables, or freestanding tops.

Key Rockwell Leg Details That Support Builds

• The 2 inch wide square profile creates a substantial bearing surface at each corner, which helps distribute load more evenly into the floor on heavier tables and work tops.
• The 34-1/2 inch high leg height aligns with common table and work surface dimensions, which simplifies planning layouts that coordinate with existing cabinetry or equipment.
• The black matte finish provides a neutral, low-glare appearance, which helps the leg visually blend with darker tops or metal hardware in utility and commercial spaces.
• The leg is identified as a single table leg, which lets builders place it exactly where additional support is needed along a run or at an open end.
• The Peter Meier brand and Rockwell designation provide a consistent style and sizing reference, which supports repeatable results across multiple installations in the same facility.

Mounting And Adjustment Features For This Leg

This Rockwell table leg uses a 4 9/16 inch, or 116 mm, square mounting plate, which gives a broad footprint at the underside of the top for stable attachment points. The plate shape supplies clear edges for positioning the leg parallel to table sides or fronts, which aids in keeping rows of legs aligned on straight installations. A 1 1/8 inch adjustable foot is integrated at the bottom of the leg, providing vertical adjustment range for leveling on floors that vary slightly in height. That adjustment lets installers take minor irregularities out of a bank of tables so tops line up more cleanly along seams. The leg is supplied with screws in the manufacturer description, allowing the mounting plate to be fastened directly to compatible table or counter substrates.

Using The Rockwell Leg In Table And Counter Runs

Where This Rockwell Table Leg Fits Best

This 2 inch wide by 34-1/2 inch high square Rockwell single table leg fits applications needing a defined work surface or table height using a single support point. Because the web description states it is suitable for table, counter and bar heights, the leg can be applied across varying top elevations when chosen in the proper size from the Rockwell range, keeping a common visual language between different stations. The 4 9/16 inch square mounting plate ties the leg firmly to the underside of the top, so it can serve at corners, mid-span positions, or open ends on workstations. In shops or commercial spaces, this configuration helps when supporting laminate, wood, or composite tops over cabinets, where one side is anchored to casework and the opposite side relies on a leg. The black matte finish also suits environments where a subdued, non-reflective support is preferred under counters or task benches.

Why Its Dimensions And Adjustability Reduce Rework

The 34-1/2 inch height of this Rockwell table leg sets a predictable starting point for achieving a finished table or work surface height, which reduces layout guesswork when lining up with adjacent casework or equipment. The 1 1/8 inch adjustable foot adds fine-tuning capability, so installers can respond to floors that are slightly out of level without altering the leg or shimming the mounting area. That adjustment range supports neater joints where multiple tops butt together because heights can be tuned after the leg is mounted. The 4 9/16 inch square mounting plate spreads the connection over a larger underside area, which helps the top resist racking loads from lateral movement in daily use. Working with a leg from Peter Meier, Inc., identified as Manufacturer Part 850-8S-02, also gives a clear reference part number for repeat orders, so future expansions or replacements match the original dimensions and finish.

Common Questions About This Rockwell Table Leg

Selecting This Rockwell Leg For Your Next Build

Choosing this 2 inch wide by 34-1/2 inch high square Rockwell single table leg in black matte gives a defined support solution for tables and work surfaces. The 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot provide both stable attachment and practical leveling. With clear identification as Peter Meier, Inc. part 850-8S-02, it suits repeatable use across jobs where consistent heights and finishes matter. For projects calling for a single-leg support with predictable dimensions, this Rockwell leg offers a focused option for building out workstations, counters, or standalone tables.