2" Wide x 34-1/2" High Square Rockwell Single Table Leg, Stainless Steel

Square Rockwell Table Leg For Stable Work Surfaces

square rockwell table leg refers to this 2 inch wide x 34-1/2 inch high square Rockwell single table leg in stainless steel from Peter Meier, Inc., which supports work surfaces and tables at a consistent height for projects that need steady, level tops. The stainless steel construction provides a solid structural element that resists everyday wear in active work areas. The 34-1/2 inch height sets a work surface or table at a practical level for many work surface and table applications where a full-height leg is required. The single-leg format lets you position support exactly where the load demands it, which is useful around corners, overhangs, or uneven cabinets. Branded as part of the Rockwell line, this leg fits into hardware layouts that already specify that series by name or part number. The defined 2 inch square profile also creates a clear reference when aligning multiple legs visually along a run.

Key Rockwell Leg Details That Support Setup

• The 2 inch wide square profile gives a uniform bearing surface at each corner, which helps distribute loads more evenly along the table frame or underside.
• The 34-1/2 inch height positions work surfaces or tables at a standard full-height level, supporting consistent ergonomics across matching installations.
• The stainless steel material provides a rigid support member that stands up to typical work surface use, which is important where tables see regular contact.
• The Rockwell single leg configuration lets you place support exactly where needed along a run, helping you address localized load points under longer tops.
• The Peter Meier, Inc. brand and specific manufacturer part number 850-8S-SS give an exact reference, which helps match legs across multiple jobs or future replacements.

Mounting And Height Details For Rockwell Leg

This Rockwell single table leg uses a 4 9/16 inch (116 mm) square mounting plate, which creates a broad interface with the underside of the work surface or table for stable attachment. The defined plate size helps you lay out screw positions around corner blocks, aprons, or framing members without guesswork. The leg also has a 1 1/8 inch adjustable foot, which provides vertical adjustment range at the bottom of the leg so the overall height can be fine-tuned on site. That adjustment helps you deal with minor floor variations while keeping the work surface or table top level with adjacent units or existing furniture. Together, the mounting plate and adjustable foot give you set dimensions to design around when planning framing, clearances, and final finished height.

How This Stainless Rockwell Leg Performs In Use

Where This Single Stainless Table Leg Fits Best

This 2 inch wide x 34-1/2 inch high Rockwell single table leg in stainless steel works in work surface and table applications where a full-height leg is required under a solid top. The square profile ties in well with straight-edged tops and modern layouts where clean lines are preferred. With its 4 9/16 inch (116 mm) square mounting plate, the leg mounts directly under a corner or support point on the underside of the surface, tying the load into framing members or thick tops. The single-leg format allows you to place this support under extended overhangs, intermediate points along a long counter, or open-sided work surfaces that do not use a full apron frame, giving you flexibility in structural layout without redesigning cabinet footprints.

Details That Help Level, Align, And Repeat Results

The 1 1/8 inch adjustable foot at the base of this Rockwell leg provides a measurable range for fine height adjustments, which is useful when aligning one work surface or table with adjoining units that sit on imperfect floors. By dialing the foot within its adjustment range, you can correct small height differences while keeping the 34-1/2 inch nominal leg length as your baseline dimension. The 4 9/16 inch square mounting plate offers enough area for multiple fasteners, which helps keep the leg from twisting under load once installed. The clearly stated 2 inch square profile also makes it easier to repeat layouts, since measuring inset distances from edges becomes straightforward along a run of matching legs. Using the specific manufacturer part number 850-8S-SS aids future service or expansion work, because you can call out the exact same leg to maintain alignment, appearance, and height across new and existing sections.

Common Questions About This Rockwell Table Leg

Selecting This Rockwell Leg For Your Next Surface

The 2 inch wide x 34-1/2 inch high square Rockwell single table leg in stainless steel provides defined dimensions, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot, giving you a known, repeatable support element for work surfaces and tables. When a project calls for a stainless steel Rockwell leg with part number 850-8S-SS, this single-leg solution from Peter Meier, Inc. offers the specified height, profile, and adjustment range needed to support and level tops in active work areas.