2" Wide x 34-1/2" High Square Rockwell Single Table Leg, Brushed Steel

Square Rockwell Single Table Leg For Work Surfaces

Square rockwell single table leg is a 2 inch wide by 34-1/2 inch high leg that supports work surfaces and tables at a consistent height, which helps installers hit planned top elevations across cabinets and bases. The leg is identified as the Peter Meier, Inc. Rockwell series with manufacturer part number 850-8S-ST, so it ties directly to plans or cut lists that call out this specific component. The 34-1/2 inch height works for standard work surface and table builds, giving fabricators a predictable starting dimension when laying out bases and tops. Brushed steel finish creates a neutral, professional look that matches many shop, office, or residential environments, so one leg style can serve multiple project types. Being part of Wurth Baer Supply offerings connects this leg to a broader woodworking hardware lineup, which keeps part selection consistent across jobs.

Key Rockwell Table Leg Details For Projects

• The 2 inch wide square profile defines a compact footprint that lets the leg sit tight to cabinet corners or frames, which helps maximize knee space while still giving clear structural support points.
• The 34-1/2 inch high dimension sets a fixed vertical reference that simplifies aligning adjacent cabinets and panels, because installers can build to a known finished height from floor to work surface.
• The brushed steel finish provides a clean metallic appearance that fits commercial or residential interiors, allowing the same leg to be used where the support is visible without disrupting the overall design.
• The part is listed under Peter Meier, Inc. Rockwell with manufacturer number 850-8S-ST, which simplifies reordering and matching legs across multiple rooms or phases of a larger project.
• Table, counter and bar heights are available in this Rockwell line, so builders can match leg height to the intended surface level and maintain consistent styling across different work zones.

Mounting Plate And Adjustable Foot For Setup

The Rockwell leg uses a 4 9/16 inch, or 116 mm, square mounting plate, which spreads the load over a generous area at the underside of the work surface so stress is distributed instead of concentrated at a single point. The square plate geometry helps align the leg parallel or perpendicular to edges during layout, which supports clean lines when legs are visible at corners. A 1 1/8 inch adjustable foot is built into the leg, giving installers vertical adjustment range for leveling on uneven floors so the top sits flat without shimming bases. This adjustable foot lets fine tuning happen after the work surface is in place, which saves time when dialing in final alignment along long runs of cabinets or tables.

Using This Brushed Steel Leg In Real Jobs

Where This 34-1/2 Inch Rockwell Leg Fits

This Rockwell single leg is defined in the product description as suitable for table, counter and bar height applications within the available Rockwell heights, which positions the 34-1/2 inch size for standard work surface and table projects. In woodworking or shop fit-outs, that fixed height lets fabricators design cabinets or support frames so the combined carcass and leg height hits the target finished surface level. The 2 inch wide square shape keeps the leg footprint controlled, so it can sit near edges or inside corners on work surfaces without taking excessive space. For office, laboratory or residential worktops, the brushed steel finish offers a contemporary support that can remain visible under tops without needing cladding, which simplifies design while staying consistent with other metal components on the job.

Details That Support Repeatable Leg Installation

The 4 9/16 inch square mounting plate gives four clear edges that can be aligned to the work surface layout lines, so each Rockwell leg can be positioned predictably from corner and edge references. That square form aids in producing rows of legs that track straight along the length of a counter or table run, which helps keep fascia and panel reveals even. The 1 1/8 inch adjustable foot built into the leg provides the fine vertical movement needed to bring multiple legs to the same bearing height once the work surface is set, so crews can correct for floor irregularities while maintaining the overall 34-1/2 inch nominal leg length. Brushed steel material on the visible portion of the leg minimizes the visual impact of minor handling marks that can occur during installation, which supports a cleaner final presentation with less post-install touchup.

Common Questions About This Rockwell Table Leg

Select This Rockwell Leg For Planned Work Heights

The 2 inch wide by 34-1/2 inch high Rockwell single table leg in brushed steel gives a defined structural support with a 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot, tying together height, alignment, and appearance for work surface builds. For projects that call for table, counter or bar heights within the Rockwell range, this Peter Meier, Inc. leg with part number 850-8S-ST provides a consistent, repeatable component that aligns with woodworking and interior fit-out workflows.