2" Wide x 40-3/4" High Square Rockwell Single Table Leg, Black Matte
Description
2 Inch Wide 40-3/4 Inch Table Leg For Work Surfaces
2 inch wide 40-3/4 inch table leg from Peter Meier is a square Rockwell single table leg in a black matte finish, so it delivers a defined, modern look on work surfaces and tables where clean lines matter. The leg height of 40-3/4 inches sets it up for tall work surfaces, so it suits counter or bar style applications where extra working or standing height is needed. The square profile matches projects that call for straight, uniform support rather than tapered shapes, which helps maintain a consistent visual line across multiple legs on the same run. As a single table leg, it works well for custom layouts where one support must carry a corner, an overhang, or a return section. The black matte surface keeps reflected glare down on bright jobsites or under strong task lighting, which helps keep the underside of counters visually quiet in commercial and residential spaces.
Key Rockwell Single Table Leg Work Advantages
- The Rockwell single table leg features a 2 inch wide square profile, which gives a compact footprint while still providing a sturdy, balanced look under tabletops and counters where available space around the support is tight.
- The 40-3/4 inch height positions this leg for counter and bar height projects, helping installers hit comfortable standing or stool seating levels without custom fabrication time or on-site cutting.
- The black matte finish delivers a neutral, low-sheen appearance, so it blends into darker casework or metalwork and allows the countertop surface or surrounding cabinetry to stay visually prominent.
- The square design of the Rockwell leg aligns easily to cabinet lines and panel edges, which simplifies layout when legs must visually line up with gables, end panels, or straight runs of casework.
- Being a single table leg configuration, this part number supports projects that use mixed support methods, such as wall cleats combined with a standalone leg at an outer corner or free edge.
Mounting Height And Foot Adjustment Details
This Rockwell table leg has a 4 9/16 inch, or 116mm, square mounting plate, giving a wide contact area at the top of the leg where it meets the underside of the work surface, which helps spread load over more material. The 4 9/16 inch dimension on the plate fits well on typical cabinet-grade substrates, leaving room for fasteners without crowding edges. The leg also uses a 1 1/8 inch adjustable foot, so the installer can fine-tune the finished height within that adjustment range to match surrounding cabinets or correct for minor floor variation. With the adjustable foot working off the 40-3/4 inch nominal leg length, there is flexibility to align multiple legs or match a specific counter height target, which is especially useful in long runs where small height differences become visible.
Where This Rockwell Single Leg Works Best
Square Rockwell Single Table Leg In Tall Applications
The square Rockwell single table leg from Peter Meier has a 40-3/4 inch overall leg height before the adjustable foot range, placing it naturally into counter and bar style projects where elevated surfaces are standard. Because the leg belongs to a table, counter and bar heights offering, it is suited to installations that follow those common height bands, which keeps finished projects in line with typical ergonomic expectations. On work surfaces that transition from standard table height up to a taller counter section, this leg can support the higher portion, helping create multi-level layouts that share a consistent design language. The 2 inch wide square profile keeps the support visually slim while still looking substantial, which can be important in commercial counters where users see the leg from multiple angles and distances.
The black matte finish on this Rockwell single table leg coordinates with darker laminates, painted panels, or powder-coated metal details, so designers can carry one color tone through toe spaces, open ends, and exposed support points. In open-plan shops or kitchens, the subdued black matte surface helps the leg recede visually under bright tops, allowing the work surface material to take focus while the structural support remains understated. Because the mounting plate is 4 9/16 inches square, the transition from leg to top has a balanced proportion that looks deliberate rather than improvised, which is helpful on island ends, peninsulas, and freestanding workstations.
Adjustment And Mounting That Support Precise Alignment
This Rockwell single table leg uses a 1 1/8 inch adjustable foot, giving a meaningful amount of vertical adjustment under the 40-3/4 inch leg body so the finished height can be dialed in without trimming metal. That adjustment lets installers match the height of adjacent casework, even when floors are slightly out of level, which reduces rework associated with shimming or re-drilling. The 116mm, or 4 9/16 inch, square mounting plate creates a generous interface with the underside of the work surface, which helps distribute loads across a larger area and supports use on a range of substrate thicknesses.
Because this leg is identified as a Rockwell single table leg with table, counter and bar heights available in the same family, specifiers can align this model with others in the Rockwell line for projects that mix heights but expect a consistent visual style. The named manufacturer, Peter Meier, Inc., is tied directly to the part number 850-1S-02, so it is easy to track this exact configuration when matching details across drawings, purchase orders, and future expansions of a work surface run. In practice, the combination of a defined 2 inch square profile, a 40-3/4 inch leg height, the 1 1/8 inch adjustable foot, and the 116mm mounting plate gives a predictable geometry that supports repeatable layouts across multiple installs.
Common Questions About Rockwell Single Table Leg Use
What are the key dimensions of this Rockwell table leg?
The Rockwell single table leg is 2 inches wide and 40-3/4 inches high, with a 4 9/16 inch (116mm) square mounting plate, so its geometry is straightforward to plan into cabinet and counter layouts.
How does the 1 1/8 inch adjustable foot help on installs?
The 1 1/8 inch adjustable foot lets the installer fine-tune leg height within that range, which helps align the work surface with nearby cabinets or counters when floors vary slightly.
What finish does this Peter Meier Rockwell leg have?
This Peter Meier Rockwell single table leg has a black matte finish, which provides a low-sheen, neutral appearance that blends into darker casework and under-counter areas.
Where is this 40-3/4 inch Rockwell leg typically used?
The 40-3/4 inch Rockwell leg is part of a table, counter and bar heights offering, so it suits taller work surfaces such as counter-height or bar-height sections in shops or kitchens.
How does the 116mm square mounting plate affect support?
The 116mm, or 4 9/16 inch, square mounting plate spreads the load across a broader area of the underside, which supports stable attachment on typical work surface materials.
What does manufacturer part number 850-1S-02 identify?
Manufacturer part number 850-1S-02 identifies this specific Rockwell leg configuration, so it can be referenced consistently for repeat orders or to match existing installations.
Select This Rockwell Leg For Tall Surface Projects
The 2 inch wide x 40-3/4 inch high square Rockwell single table leg in black matte from Peter Meier combines a defined leg height, a 1 1/8 inch adjustable foot, and a 116mm square mounting plate to support counter and bar style work surfaces with predictable geometry. For projects built through Wurth Baer Supply, this specific 850-1S-02 model gives a repeatable solution when a square, black matte, tall support is required under tables, counters, or bar-height sections.