2" Wide x 40-3/4" High Square Rockwell Single Table Leg, Stainless Steel

2 Inch Wide 40-3/4 Inch Table Leg For Sturdy Support

2 inch wide 40-3/4 inch table leg from Peter Meier, Inc. provides a single, square leg solution for work surfaces and tables, so you can support corners, peninsulas, or freestanding tops with a consistent, known height. The 40-3/4 inch height defines this leg as a tall support, matching installations where extra elevation is required, which helps align work surfaces in multi-level layouts. The square profile creates a uniform 2 inch wide look, giving projects clean, straight lines wherever this leg is visible. The Rockwell single table leg design keeps each support independent, which works well when you are laying out custom table, counter, or bar configurations. Being part of the Work Surface & Tables hardware class ties this leg directly to fabrication tasks around tops, so it fits naturally into cabinet shop and commercial millwork workflows.

Key Rockwell Single Table Leg Details For Projects

• The 40-3/4 inch high dimension sets the base height for this leg, allowing you to plan finished work surface levels around a fixed reference point and coordinate multiple legs on the same run.
• The 2 inch wide square section defines the footprint, which helps when you are laying out clearances at corners, toe spaces, or under-apron locations on custom tables.
• The Rockwell single table leg format keeps each support separate, which is useful when spacing legs along long tops or supporting overhangs where continuous frames are not used.
• The table, counter, and bar heights available note connects this leg to a family of matching heights, so you can visually coordinate supports across different elevation zones in the same project.
• The classification under Work Surface & Tables and Table Legs confirms that this component is intended as a primary vertical support, simplifying specification when building or modifying tops.

Mounting And Adjustment Details For Accurate Fit

The 1 1/8 inch adjustable foot built into this Rockwell single table leg gives you vertical adjustment at the floor, which helps you accommodate uneven substrates while still hitting your design height. The 4 9/16 inch (116mm) square mounting plate at the top sets a defined interface to the work surface, so you have a predictable bearing area when positioning the leg under a table, counter, or bar top. The square plate shape matches the 2 inch square leg profile, which keeps alignment straightforward when orienting the leg relative to edges. Together, the adjustable foot and square mounting plate support fine tuning during installation, which reduces time spent shimming and re-aligning after the top is in place.

Using This Rockwell Table Leg In Real Projects

Where The Stainless Steel Leg Fits Best

This Rockwell single table leg in stainless steel is part of the Work Surface & Tables category, so it slots into projects where a table, counter, or bar top needs a defined vertical support point. The stainless steel construction gives the leg a material identity suited to work environments where metal finishes are preferred, tying in with fixtures and other stainless components. The 2 inch wide square form paired with the 40-3/4 inch high dimension makes this leg appropriate for taller surface designs, such as elevated work areas or upper counters. The 4 9/16 inch (116mm) square mounting plate concentrates the interface with the top into a compact, known geometry, which is helpful when laying out bolt patterns or reinforcement pads. Because this leg is a single, stand-alone element, it is well suited to open-end configurations, peninsulas, and situations where one or more corners of a work surface require independent vertical support.

Details That Support Repeatable Layout Results

The specific 40-3/4 inch height of this Peter Meier, Inc. Rockwell leg allows you to standardize drawings around a precise vertical dimension, which supports consistent fabrication across multiple identical units. The 1 1/8 inch adjustable foot adds controlled tolerance above that nominal height, giving you room to compensate for floor variations without altering the leg body or modifying the top. The 2 inch square profile provides a clear reference when aligning the leg with edges or cabinetry lines, reducing guesswork as you repeat installations in a series of rooms or stations. The 4 9/16 inch square mounting plate dimension provides a repeatable pattern for locating the leg under tops, which streamlines jigs or drilling templates in a shop setting. With the manufacturer part number 850-1S-SS defining this exact configuration, you can reorder the same Rockwell single table leg for future phases and maintain consistent appearance and fit across the entire project.

Common Questions About This Rockwell Table Leg

Selecting This Leg For Your Next Work Surface

This square stainless steel Rockwell single table leg from Peter Meier, Inc., with its 2 inch width, 40-3/4 inch height, 1 1/8 inch adjustable foot, and 4 9/16 inch mounting plate, provides defined dimensions you can design around. Those verified details help you plan table, counter, or bar style work surfaces that align consistently from drawing through installation. For projects moving through Wurth Baer Supply, this leg offers a clearly specified option whenever a tall, square stainless support is required.