2" Wide x 40-3/4" High Square Rockwell Single Table Leg, Brushed Steel
Description
2 Inch Wide 40-3/4 High Table Leg For Rigid Support
The 2 inch wide 40-3/4 high table leg from Peter Meier, Inc. is a single Rockwell square leg designed to support work surfaces and tables, so one leg can be placed exactly where extra load-bearing support is needed. The 2 inch square profile creates a compact yet substantial support point, which helps stabilize tops without taking up unnecessary under-table space. The 40-3/4 inch overall height positions the leg for table-height applications in work surface and table builds. The brushed steel finish provides a clean, professional look that pairs easily with a range of work surface materials in shop or project environments. This Rockwell single leg design lets fabricators add one leg at a time wherever layout or overhang details demand a discrete structural support.
Key Rockwell Single Table Leg Details
- The 2 inch wide square Rockwell leg profile presents a straight, flat face on all sides, giving builders a consistent edge to align with cabinet lines or table aprons for a neat, repeatable appearance.
- The 40-3/4 inch high dimension sets the leg for table-height use, which allows installers to match this support to work surfaces and tables built around that height range.
- The brushed steel construction gives the leg a neutral metallic finish, so it visually ties into other brushed metal components and blends with typical commercial or shop environments.
- The Rockwell single table leg format lets users position a stand-alone support under corners, mid-spans, or overhangs where a full base or cabinet is not present.
- The Peter Meier, Inc. branding and 850-1S-ST part number identify this leg within the Rockwell system, which helps shops reorder the same size and style for consistent builds on repeat projects.
Square Mounting Plate And Height Adjustment
The 4 9/16 inch (116mm) square mounting plate on the Rockwell single table leg provides a broad interface against the underside of the work surface, spreading load over a wider area so stress is not concentrated at a small point. The square shape also gives fabricators straight reference edges for laying out screw locations relative to top edges or cabinet lines. The 1 1/8 inch adjustable foot at the bottom of the leg allows minor height changes, which supports leveling a run of tables or work surfaces when floors vary. This adjustment range lets installers fine-tune final height within the available travel, bringing tops into alignment with adjoining surfaces.
Using This Brushed Steel Leg In Real Projects
Where The Rockwell Single Table Leg Fits Best
This Rockwell single table leg is part of the work surface and tables category, so it serves as a vertical support in table and work surface assemblies. The 2 inch square form presents a compact footprint, which works well at corners or near seating areas where clearance matters. At 40-3/4 inches high, the leg is suited to table-height projects such as work benches or task tables that need a defined, consistent height. The 4 9/16 inch square mounting plate at the top engages a generous area on the underside of the top, which is helpful when supporting heavier work surfaces across a broader contact zone. Because the product is a single leg, it can be integrated into mixed-support layouts where some sides are carried by cabinets and others rely on this leg for structural support.
Details That Support Alignment And Repeatable Setup
The 2 inch wide square profile gives installers four flat faces, which simplifies orienting the leg parallel to table edges for a clean visual line. The brushed steel finish provides a consistent surface that hides minor handling marks more evenly than a highly reflective surface, which is useful during fabrication and install work. The 4 9/16 inch (116mm) square mounting plate offers known dimensions, so shops can create jigs or templates for quick, repeatable screw layout across multiple tops. The 1 1/8 inch adjustable foot adds controlled vertical play, letting installers bring a run of legs into plane when aligning long work surfaces. The defined 40-3/4 inch height, together with the adjustment feature, helps maintain a predictable working height from one project to the next when the same part number 850-1S-ST is specified.
Common Questions About This Rockwell Table Leg
What is the overall size of this Rockwell single table leg?
The Rockwell single table leg is 2 inches wide with a 2 inch square profile and stands 40-3/4 inches high, giving a defined table-height support for work surfaces and tables.
How does the adjustable foot on this table leg help during installation?
The table leg has a 1 1/8 inch adjustable foot that allows small height changes, so installers can level work surfaces and align multiple legs when floors are uneven.
What does the 4 9/16 inch square mounting plate do?
The 4 9/16 inch (116mm) square mounting plate spreads the load across a broad area under the top and provides straight edges for accurate screw positioning.
What finish does this Peter Meier Rockwell leg use?
This Peter Meier, Inc. Rockwell leg uses a brushed steel finish, giving a neutral metallic look that coordinates with typical metal components in work surface builds.
How is this Rockwell leg identified for reordering?
The Rockwell leg is identified by the manufacturer Peter Meier, Inc. and the part number 850-1S-ST, which helps shops specify the same leg on future projects.
For what type of projects is this table leg intended?
This leg is categorized for work surface and tables, so it is intended as a structural support in table-height work surfaces and table assemblies.
Selecting This Leg For Work Surface Projects
This Rockwell single table leg from Peter Meier, Inc. combines a 2 inch square profile, 40-3/4 inch height, brushed steel finish, 4 9/16 inch square mounting plate, and 1 1/8 inch adjustable foot, giving fabricators defined dimensions and adjustment for table-height work surface builds. For projects calling for a square, brushed steel support with these measurements and the 850-1S-ST identifier, this leg provides a consistent solution that can be repeated across multiple installations.