2-3/8" Diameter x 40-3/4" High Rockwell Table Leg Set, Black Matte, 4/Set
Description
Rockwell Table Leg Set For Work Surfaces
Rockwell table leg set describes this 2-3/8 inch diameter x 40-3/4 inch high Peter Meier, Inc. leg set that supports table, counter, and bar height work surfaces in one product line. The 40-3/4 inch height establishes a bar-height solution, which matters when matching standard bar tops or tall workstations. The black matte finish identifies a neutral, low-sheen surface that pairs with many tops without glare. The legs are part of the Rockwell series, so the 960-40-02 manufacturer part number ties this set to a consistent specification for repeat projects. As a table leg set in the Work Surface & Tables category, the product serves as a structural support element in woodworking and commercial layouts. Being supplied as a set means legs are matched for height and style, which helps keep a uniform look on multi-leg installations.
Key Rockwell Leg Details That Support Projects
- The 2-3/8 inch diameter tube provides a defined footprint, which helps distribute vertical load at each corner or support point in a work surface design.
- The 40-3/4 inch high leg dimension positions tops at bar height when combined with typical top thickness, which supports tall seating or standing-height counters.
- The black matte finish gives a dark, non-reflective appearance, which helps the legs visually recess under tops in both residential and commercial installations.
- The 1 1/8 inch adjustable foot offers vertical adjustment travel, which helps compensate for uneven floors and fine-tunes final top height.
- The 4 9/16 inch (116 mm) square mounting plate defines a broad attachment area, which spreads fastener load into the underside of the top for stability.
- The set of 4 legs keeps all supports at matching size and style, which simplifies layout on rectangular tops with four primary support points.
Mounting Plate And Height Adjustment Function
The 4 9/16 inch square mounting plate on each Rockwell table leg establishes a clear fastening zone under the work surface, which helps installers position fasteners away from edges. The 1 1/8 inch adjustable foot introduces vertical play, which matters when leveling multiple legs on irregular substrates. This combination of fixed tube length and adjustable foot lets the 40-3/4 inch high system land at a precise working elevation while still accommodating floor variations. As a Work Surface & Tables component, the mounting plate plus adjustable foot pairing helps maintain contact at all support points, which reduces rocking under use.
Using Rockwell Table Leg Sets In Real Projects
Where Rockwell Table Leg Set Fits Best
The Rockwell table leg set from Peter Meier, Inc. fits projects where a 40-3/4 inch high support is needed for bar-height tops in the Work Surface & Tables category. The 2-3/8 inch diameter profile suits layouts where a round steel-style leg is preferred instead of cabinet bases. Because the legs are black matte, they pair with light or dark tops without drawing attention, so they work in both back-of-house work areas and visible bar fronts. The 4 9/16 inch square mounting plate aligns with tops that provide enough underside area for plate placement, which is important on narrower counters or overhangs. As a matched set, the legs support rectangular tops with four corners, such as bar counters, standing desks in shop spaces, or tall worktables.
Details That Help Level And Repeat Installations
The 1 1/8 inch adjustable foot on this Rockwell table leg set gives each leg its own leveling range, which is helpful when floors slope across a long bar or table run. That adjustment range makes it easier to dial in a flat surface even when subfloors vary from one end of the installation to the other. The defined 40-3/4 inch tube height works as a repeatable reference dimension across multiple stations, which simplifies planning when several bar-height surfaces must align. The 4 9/16 inch mounting plate size remains constant across the set, which aids in jig-based drilling patterns on production runs. With the 960-40-02 part number linking these details together, shops can reorder the same configuration and reproduce earlier layouts without recalculating leg geometry.
Common Questions About Rockwell 960-40-02 Legs
What height does the 40-3/4 inch Rockwell leg support?
The Rockwell table leg set uses a 40-3/4 inch high tube that targets bar-height applications, so tops land in a tall working or seating zone depending on top thickness.
How does the 1 1/8 inch adjustable foot help leveling?
The Rockwell leg adjustable foot provides 1 1/8 inch of vertical travel, which lets installers compensate for uneven floors and align multiple legs to a single plane.
What does the 4 9/16 inch square mounting plate do?
The Rockwell leg mounting plate measures 4 9/16 inches square, providing a broad fastening area that spreads load and supports stable attachment to the underside of tops.
Where is the Rockwell table leg set typically used?
The Rockwell table leg set is listed under Work Surface & Tables, so it suits table, counter, and bar height work surfaces that need separate leg supports.
What finish does the Peter Meier Rockwell leg set have?
The Peter Meier Rockwell table leg set has a black matte finish, which offers a low-sheen, dark appearance that blends with many work surface materials.
How many supports are in the Rockwell table leg set?
The Rockwell table leg set is described as a set of 4 legs, which aligns with four-corner support layouts on rectangular tops or similar surfaces.
Selecting This Rockwell Leg Set For Bar Height
This 2-3/8 inch diameter x 40-3/4 inch high Rockwell table leg set in black matte gives you a defined bar-height solution with built-in adjustment. With the 1 1/8 inch adjustable foot and 4 9/16 inch square mounting plate, the 960-40-02 configuration supports stable tops on uneven floors. For projects calling for Work Surface & Tables components from Peter Meier, Inc., this matched set of legs provides a repeatable specification you can apply across multiple bar-height workstations.