2-3/8" Diameter x 40-3/4" High Rockwell Table Leg Set, Chrome, 4/Set
Description
Rockwell Table Leg Set For Sturdy Surfaces
Rockwell table leg set describes a set of four 2-3/8 inch diameter x 40-3/4 inch high legs in a chrome finish from Peter Meier, Inc. That size and height supports work surfaces where a tall, consistent support structure is required across the entire table. The 2-3/8 inch diameter tubular leg profile provides a substantial support column, which helps the table feel solid under load in typical work or seating applications. The 40-3/4 inch height works where an elevated work surface is needed, giving installers a defined dimension for layout and fabrication. The chrome finish identifies a bright, metal-look surface, which matters when the leg is visible in commercial or residential spaces matching other chrome components. The set format means all four corners of a rectangular top can be supported with the same height and design for a uniform installation appearance.
Key Rockwell Table Leg Set Details
- The 2-3/8 inch diameter leg dimension creates a broad support footprint, which helps distribute vertical loads along the tube and into the floor in typical table applications.
- The 40-3/4 inch high leg length establishes a fixed elevation for the surface, which simplifies planning when building tall workstations or similar installations around this dimension.
- The chrome finish on the Rockwell leg set provides a reflective metal appearance, which helps the legs visually coordinate with other chrome hardware in the same room.
- The product is sold as a set of four legs, which allows each corner of a standard rectangular surface to be supported with the same components for consistent geometry.
- The product name identifies the set as table legs within the Work Surface & Tables category, which aligns these legs with typical table and workstation construction tasks.
Mounting And Height Adjustment Function Details
This Rockwell leg set uses a 4 9/16 inch (116 mm) square mounting plate, which delivers a defined bearing area where the leg meets the underside of the surface. That square plate layout helps spread loads over a wider area of the top, which is useful for particleboard, MDF, or similar substrates used in many work surfaces. The legs feature a 1 1/8 inch adjustable foot, which allows small height changes at the base. That adjustment range helps compensate for minor floor irregularities so the installer can bring all legs into contact and reduce rocking, improving stability for daily use. The mounting plate and adjustable foot are integral parts of how these legs connect the floor to the work surface.
Using Peter Meier Rockwell Legs In Projects
Where This Rockwell Table Leg Set Fits Best
The product is classified under Work Surface & Tables in the table legs product class, which ties this Rockwell leg set directly to building and supporting tables or similar surfaces. The 40-3/4 inch height can be applied in layouts that call for a taller surface relative to standard desk heights, giving designers and installers a defined vertical dimension for planning adjacent cabinetry or equipment. Because the mounting plate measures 4 9/16 inch square, it suits tops with enough underside area at each corner to accept that footprint. The 2-3/8 inch diameter profile works visually with tops that can balance a comparatively substantial leg size, which is often preferred for work surfaces or more robust table constructions.
How Rockwell Details Support Consistent Results
The manufacturer part number 960-40-C1 identifies this specific Rockwell leg configuration, which helps purchasers repeatedly order the same size and finish for multi-room or multi-station projects. The 1 1/8 inch adjustable foot offers a defined range for fine-tuning height at the floor, which supports aligning multiple tables in a row when floors vary slightly. The 4 9/16 inch (116 mm) square mounting plate gives a predictable drilling or fastener pattern area, which can streamline fabrication when tops are prepared in a shop setting. The chrome finish on all four legs allows designers to repeat the same visual element across several installations, creating continuity between work surfaces that share this table leg style.
Common Questions About Rockwell Leg Set Use
What height work surfaces suit the 40-3/4 inch Rockwell legs?
The Rockwell table leg set height of 40-3/4 inches suits applications requiring a tall work surface, so projects can be designed around that fixed elevation when planning adjacent components.
How does the 1 1/8 inch adjustable foot help installation?
The adjustable foot on each leg offers 1 1/8 inches of height change, which lets installers correct for small floor variations so all legs contact evenly and the top sits stable.
What does the 4 9/16 inch square mounting plate do?
The 4 9/16 inch square mounting plate spreads the load where the leg meets the surface, which supports the top over a wider area and provides a defined zone for fastener placement.
How does the 2-3/8 inch leg diameter affect performance?
The 2-3/8 inch diameter provides a broad tubular support, which helps the leg resist bending in normal table use and supports a solid feel under vertical loads.
Why choose the chrome finish Rockwell table leg set?
The chrome finish on this Rockwell table leg set creates a reflective metal appearance, which coordinates with other chrome components in a space for a unified look.
What does part number 960-40-C1 indicate for this leg set?
Part number 960-40-C1 identifies this specific Peter Meier Rockwell leg set, which ties the 40-3/4 inch height, 2-3/8 inch diameter, and chrome finish to one repeatable product.
Selecting This Rockwell Set For Your Project
The Peter Meier, Inc. Rockwell table leg set combines 40-3/4 inch high, 2-3/8 inch diameter chrome legs with a 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot, so projects needing a tall, consistent, and finely adjustable support solution can be built around a single defined configuration.