2-3/8" Diameter x 40-3/4" High Rockwell Table Leg Set, Stainless Steel, 4/Set
Description
Rockwell Table Leg Set For Work Surfaces
Rockwell table leg set from Peter Meier, Inc. provides a matched group of stainless steel legs for supporting work surfaces and tables, giving installers a consistent structural base across a project. The 2-3/8 inch diameter on each leg creates a sturdy, substantial support column, which helps stabilize tops in day-to-day use. Each leg stands 40-3/4 inch high, putting the finished surface into a tall work, counter, or bar-height range where elevated access is needed. The legs use stainless steel construction, which resists corrosion in typical interior environments and maintains a clean, professional appearance over time. This set is classified under table legs for work surfaces and tables, so it fits directly into shop, commercial, or residential build-outs using separate tops. The product is identified by manufacturer part number 960-40-SS, which ties the installed legs to a known Rockwell series component when matching or reordering.
Key Rockwell Leg Details For Daily Use
- The 2-3/8 inch diameter round profile spreads load over a wider tube, which supports heavier work surfaces with reduced flex at the contact points.
- The 40-3/4 inch height elevates the work surface into a taller range, which suits counter or bar-style applications where users stand while working.
- The stainless steel material provides a hard, corrosion-resistant exterior, which helps the legs hold up to traffic and cleaning in typical shop or commercial interiors.
- Being a matched table leg set for work surfaces and tables, all four legs share the same dimensions and finish, which simplifies layout and visual alignment during installation.
- Branding as Peter Meier, Inc. Rockwell series legs links the product to a recognized component family, which aids in coordinating with other Rockwell-based installations.
Mounting Height And Adjustment Details
The Rockwell table leg set is built around a 40-3/4 inch leg height, which positions the underside of a top into a counter or bar-height working zone. Each leg integrates a 1 1/8 inch adjustable foot, allowing the installed height to be fine-tuned within that range. This adjustment helps installers correct for uneven floors so the work surface can sit level without shimming under the tube. A 4 9/16 inch (116 mm) square mounting plate is attached at the top of each leg, providing a defined footprint for fastening to the underside of the work surface. That square plate layout concentrates fastener positions into a predictable pattern, which supports repeatable mounting and easier layout on multiple tops.
Using Rockwell Stainless Legs In Real Projects
Where Rockwell Table Leg Set Performs Best
The Rockwell table leg set is designated for work surfaces and tables, so it fits naturally into shop benches, commercial counters, or tall table builds that rely on separate tops. The 40-3/4 inch height positions surfaces in a standing-use range, which suits tasks where users stay on their feet rather than sit. Stainless steel construction supports use in interiors where appearance matters alongside load support, such as customer-facing counters or clean-looking work rooms. The 2-3/8 inch diameter contributes to a solid stance on the floor, which benefits longer or deeper tops that need confident support at each corner. Because all four legs share identical height, diameter, and finish, they work well in runs where multiple tables or counters must look uniform.
Details That Support Level, Repeatable Installations
The 1 1/8 inch adjustable foot on each leg gives installers a built-in method to tune height, so a bank of tables or counters can be leveled relative to one another without altering the tops. This adjustment range is especially useful when floors vary slightly from corner to corner, letting the foot take up the difference while the tube remains vertical. The 4 9/16 inch (116 mm) square mounting plate presents a defined contact patch against the underside of the work surface, which helps distribute loads from the top into the tube. That square geometry also gives a straightforward reference for positioning, allowing consistent setback from edges along multiple installations. With manufacturer part number 960-40-SS tying the leg set to the Rockwell line, replacements or additions can match existing installations in height, diameter, and stainless finish.
Common Questions About Rockwell 960-40-SS Legs
What is the overall height of the Rockwell table leg set?
The Rockwell table leg set uses legs that are 40-3/4 inch high, placing finished work surfaces into a counter or bar-height range suited to standing use.
How does the 1 1/8 inch adjustable foot help installation?
The 1 1/8 inch adjustable foot lets each leg be raised or lowered slightly, so installers can level the work surface when floors are uneven.
What does the 2-3/8 inch leg diameter provide in use?
The 2-3/8 inch diameter creates a broader support column, which helps carry work surface loads with less flex and more stable footing.
How is the Rockwell table leg set mounted to the top?
The Rockwell table leg set uses a 4 9/16 inch (116 mm) square mounting plate at the top of each leg, giving a defined area for fastening to the underside of the surface.
Why choose stainless steel for these table legs?
The stainless steel construction resists corrosion and maintains a clean appearance, which suits interior work surfaces and tables exposed to regular use and cleaning.
What does the 960-40-SS part number signify?
The 960-40-SS part number identifies this Rockwell stainless steel leg set configuration, helping match future legs to the same height and style.
Selecting This Rockwell Set For Tall Surfaces
The Rockwell table leg set from Peter Meier, Inc. combines 40-3/4 inch height, 2-3/8 inch diameter tubing, and stainless steel construction to support elevated work surfaces. The 1 1/8 inch adjustable foot and 4 9/16 inch (116 mm) square mounting plate streamline leveling and fastening. For projects calling for tall, stainless steel work surface or table supports within the Rockwell family, this 960-40-SS leg set provides a coordinated solution.
